06-57-16

Service Bulletin Details

Public Details for: 06-57-16

This service information bulletin announces a change to the mounting bolts and corresponding increased tightening torque value used for securing the front disc brake caliper support to the axle housing.


- 2017 -

ATTENTION:
CLAIMS PERSONNEL q
IMPORTANT - All
Service Personnel
Should Read and
Initial in the boxes
provided, right.
SERVICE MANAGER
© 2016 Subaru of America, Inc. All rights reserved.
GENERAL MANAGER q
PARTS MANAGER
q
q
SERVICE INFORMATION BULLETIN
APPLICABILITY: 2017MY Legacy and Outback Models
SUBJECT: New Disc Brake Mounting Bolt and
		 Torque Specification Change
NUMBER: 06-57-16
DATE: 07/28/16
INTRODUCTION:
This Service Information bulletin announces a change to the mounting bolts and corresponding
increased tightening torque value used for securing the front disc brake caliper support to the axle
housing.
PRODUCTION CHANGE INFORMATION:
The new mounting bolts with an integral washer were incorporated at the 2017MY start of
production (SOP).
PART INFORMATION:
The part number for the new mounting bolt is 901260023.
SERVICE PROCEDURE / INFORMATION:
The illustration below shows the location of the mounting bolts. The (increased) torque specification
for the new mounting bolt (T3) is 135 Nm (99.6 ft. lbs.).
Continued...
CAUTION: VEHICLE SERVICING PERFORMED BY UNTRAINED PERSONS COULD
RESULT IN SERIOUS INJURY TO THOSE PERSONS OR TO OTHERS.
Subaru Service Bulletins are intended for use by professional technicians ONLY. They
are written to inform those technicians of conditions that may occur in some vehicles,
or to provide information that could assist in the proper servicing of the vehicle. Properly
trained technicians have the equipment, tools, safety instructions, and know-how to
do the job correctly and safely. If a condition is described, DO NOT assume that this
Service Bulletin applies to your vehicle, or that your vehicle will have that condition.
Bulletin Number: 06-57-16; Date: 07/28/16
SUBARU OF AMERICA, INC. IS
ISO 14001 COMPLIANT
ISO 14001 is the international standard for
excellence in Environmental Management
Systems. Please recycle or dispose of
automotive products in a manner that is friendly
to our environment and in accordance with all
local, state and federal laws and regulations.
Page 1
IMPORTANT REMINDERS:
•
•
•
SOA strongly discourages the printing and/or local storage of service information as previously
released information and electronic publications may be updated at any time.
Always check for any open recalls or campaigns anytime a vehicle is in for servicing.
Always refer to STIS for the latest service information before performing any repairs.
Bulletin Number: 06-57-16; Date: 07/28/16
Page 2


© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.