L-SB-0074-14 Rev
Service Bulletin Details
Public Details for: L-SB-0074-14 Rev
Tsb: revision notice: the parts information section, and required tools & equipment section has been updated. Lexus models equipped with the hdd navigation (emv-n) system require a special service tool (sst) usb drive to update the map, p
Models from 2015
2015 LEXUS IS 250C |
2015 LEXUS IS 350C |
2015 LEXUS LX570 |
2015 LEXUS RX HYBRID |
2015 LEXUS RX350 |
2015 LEXUS RX450H |
Models from 2014
Models from 2013
L-SB-0074-14 Rev2 October 1, 2014 HDD Navigation Map Update Process (EMV-N) Service Category Audio/Visual/Telematics Section Navigation/Multi Info Display USA Market Applicability YEAR(S) MODEL(S) 2013 CT200H, IS250, IS350 2013 – 2014 ES300H, ES350, GS350, GS450H, IS F, LS460, LS600H 2013 – 2015 IS250C, IS350C, LX570, RX350, RX450H ADDITIONAL INFORMATION REVISION NOTICE September 16, 2016 Rev2: • The Parts information section, and Required Tools & Equipment section has been updated. November 2, 2015 Rev1: • Applicability has been updated to include 2015 model year IS 250C & IS 350C vehicles. • The Parts Information section has been updated. Any previous printed versions of this bulletin should be discarded. SUPERSESSION NOTICE The information contained in this bulletin supersedes SB No. L-SB-0003-13. • Applicability has been updated to include 2015 model year LX 570, RX 350, RX 450h vehicles. Service Bulletin No. L-SB-0003-13 is Obsolete and any printed versions should be discarded. Be sure to review the entire content of this bulletin before proceeding. © 2016 Lexus, a division of Toyota Motor Sales, USA Page 1 of 9 L-SB-0074-14 Rev2 Page 2 of 9 October 1, 2014 HDD Navigation Map Update Process (EMV-N) Introduction Lexus models equipped with the HDD Navigation (EMV-N) System require a Special Service Tool (SST) USB drive to update the map, points of interest, Gracenote®, and system software. The SST is used with all vehicles to deliver the update, however a unique Activation Number is required for each vehicle. Activation Numbers are provided in an Activation Card Number (ACN) pamphlet available through the normal parts ordering system. Use the process described in this bulletin to perform the update. NOTE • Gracenote® information must be updated at the same time as Map Data. This data is included on the Map Data SST. • Map data will be released annually through the shipment of a USB Drive SST to each dealer. The SST must be stored in the SST cabinet to ensure it can be easily found. Warranty Information OP CODE DESCRIPTION TIME OFP T1 T2 N/A Not Applicable to Warranty – – – – Parts Information CURRENT PART NUMBER PART NAME QTY PT219-HDD07-16 ACN NAV UPDTE V.16.1 (Pamphlet) 1 NOTE Pamphlet is green, with Lexus and Denso labels on the front cover. Required Tools & Equipment SPECIAL SERVICE TOOLS (SST) PART NUMBER QTY USB Drive Navigation Map Update - Denso* LEXD-HDD07-16 1 * Essential SST. NOTE Additional SSTs may be ordered by calling 1-800-933-8335. © 2016 Lexus, a division of Toyota Motor Sales, USA L-SB-0074-14 Rev2 October 1, 2014 Page 3 of 9 HDD Navigation Map Update Process (EMV-N) On-vehicle Data Navigation Update 1. Update Gracenote® information using Service Bulletin No. L-SB-0073-14, “HDD Navigation Gracenote Database Update Process (EMV-N).” HINT Connect a battery charger to the vehicle prior to beginning the process to ensure constant battery voltage. 2. Log into TIS. 3. Log into Navigation Update Wizard. Figure 1.. A. Click on the TIS tab. B. Click on the Diagnostics tab. C. Click on the Navigation tab. D. Re-enter your password. E. Click Login. 4. Select Denso from the Select Navigation Manufacturer dropdown. Figure 2.. 5. Enter the Activation Card number from the inside of the pamphlet (obtained from Parts department). Figure 3.. 6. Click Submit. 7. Press the “ENGINE START STOP” switch two times with the brake pedal released to cycle the ignition to the “ON” position (Engine/Hybrid system “OFF”). © 2016 Lexus, a division of Toyota Motor Sales, USA L-SB-0074-14 Rev2 October 1, 2014 HDD Navigation Map Update Process (EMV-N) On-vehicle Data Navigation Update (Continued) 8. Please note the head unit style to determine how to get to the Map Data screen. A. Press the INFO APPS button on the navigation head unit. Figure 4. B. Press Menu on the Remote Touch pad. Then select Info/Apps. Figure 5. 9. Select Map Data on the navigation screen. Figure 6.. © 2016 Lexus, a division of Toyota Motor Sales, USA Page 4 of 9 L-SB-0074-14 Rev2 October 1, 2014 HDD Navigation Map Update Process (EMV-N) On-vehicle Data Navigation Update (Continued) 10. Record the Map Version and Map Update ID from the navigation screen. Figure 7.. 11. Enter navigation data into the Navigation Update Wizard form. Figure 8.. A. Select the correct USB part number (found on the SST packaging; Starts with LEXD). B. Input the Map Update ID into TIS (without hyphens). C. Input the Map Version into TIS. D. Enter the VIN. E. Enter the Repair Order Number. F. Click Submit. 12. Check off each item after confirming that it is correct. If any of the information is incorrect, click the Back button. Figure 9.. 13. Click Confirm. © 2016 Lexus, a division of Toyota Motor Sales, USA Page 5 of 9 L-SB-0074-14 Rev2 October 1, 2014 Page 6 of 9 HDD Navigation Map Update Process (EMV-N) On-vehicle Data Navigation Update (Continued) 14. Note the License Key that was generated. (Print this page if necessary.) Figure 10.. 15. Insert the USB Drive SST into the USB port of the vehicle (usually located under the navigation head unit, in the center console/armrest, or glove box). 16. Select Update Map on the navigation screen. Figure 11.. 17. Select Yes. Figure 12.. © 2016 Lexus, a division of Toyota Motor Sales, USA L-SB-0074-14 Rev2 October 1, 2014 HDD Navigation Map Update Process (EMV-N) On-vehicle Data Navigation Update (Continued) 18. Enter the License Key from step 14. Figure 13.. 19. Select OK. 20. Update navigation head unit software. Select Yes on the Software Update screen to accept and begin this update. Figure 14.. If the head unit displays the Map Update screen, go to step 21. NOTE Navigation Map Data will be loaded when this process completes. Figure 15.. © 2016 Lexus, a division of Toyota Motor Sales, USA Page 7 of 9 L-SB-0074-14 Rev2 October 1, 2014 Page 8 of 9 HDD Navigation Map Update Process (EMV-N) On-vehicle Data Navigation Update (Continued) A. Cycle ignition OFF, then ON (Ready OFF/Engine OFF). Figure 16.. B. Allow update to complete (approximately 10 minutes). Figure 17.. C. The head unit will prompt to cycle ignition. Cycle ignition OFF and then ON (Ready OFF/Engine OFF). D. Press the INFO APPS button. Figure 18.. E. Select Map Data. © 2016 Lexus, a division of Toyota Motor Sales, USA L-SB-0074-14 Rev2 October 1, 2014 HDD Navigation Map Update Process (EMV-N) On-vehicle Data Navigation Update (Continued) 21. The Navigation Map Update will begin automatically. Figure 19.. NOTE This process will take about 45 minutes. 22. The new map data will be available after you cycle the ignition. Cycle ignition OFF, then ON (Ready OFF/Engine OFF). Figure 20.. 23. Map Update is complete. Figure 21.. 24. Verify navigation operation. © 2016 Lexus, a division of Toyota Motor Sales, USA Page 9 of 9