PIP5115
Service Bulletin Details
Public Details for: PIP5115
This preliminary information communication provides information to the technician about vehicles that have diagnostic trouble code P0011 after the camshaft was replaced. Technician should check the part number on the cam that was replaced f
- 2014 - 2013 - 2012 - 2011 - 2010 -
Models from 2014
2014 CADILLAC ESCALADE |
2014 CHEVROLET CAMARO |
Models from 2013
2013 CADILLAC ESCALADE |
2013 CADILLAC ESCALADE ESV |
2013 CADILLAC ESCALADE EXT |
2013 CHEVROLET CAMARO |
2013 GMC YUKON DENALI |
Models from 2012
2012 CADILLAC ESCALADE |
2012 CADILLAC ESCALADE ESV |
2012 CADILLAC ESCALADE EXT |
2012 CHEVROLET CAMARO |
2012 GMC YUKON DENALI |
Models from 2011
2011 CADILLAC ESCALADE |
2011 CADILLAC ESCALADE ESV |
2011 CADILLAC ESCALADE EXT |
2011 CHEVROLET CAMARO |
2011 GMC YUKON DENALI |
2011 GMC YUKON DENALI XL |
Models from 2010
2010 CADILLAC ESCALADE |
2010 CADILLAC ESCALADE ESV |
2010 CADILLAC ESCALADE EXT |
2010 CHEVROLET CAMARO |
2010 GMC YUKON DENALI |
2010 GMC YUKON DENALI XL |
Bulletin No.: PIP5115 Date: Apr-2013 Subject: SES Lamp P0011 Setting After Camshaft Replacement Models: 2010-2014 Cadillac Escalade 2010-2014 Chevrolet Camaro 2010-2014 GMC Yukon Denali With engine RPO 6.2L L94 L99 The following diagnosis might be helpful if the vehicle exhibits the symptom(s) described in this PI. Condition/Concern You may encounter a P0011 setting after the replacement of the camshaft. Recommendation/Instructions Inspect the camshaft to determine if the correct Part number has been installed. The inspection consists of verifying the last 4 digits on the camshaft (stamped on the end) match the part number listed on the box. 1. Shows a good camshaft 2. Shows the wrong camshaft Warranty Information For vehicles repaired under warranty use: Labor Operation Description 1 Labor Time J0850 Camshaft Replacement Use Published Labor Operation Time Please follow this diagnostic or repair process thoroughly and complete each step. If the condition exhibited is resolved without completing every step, the remaining steps do not need to be performed. GM bulletins are intended for use by professional technicians, NOT a "do-it-yourselfer". They are written to inform these technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions, and know-how to do a job properly and safely. If a condition is described, DO NOT assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See your GM dealer for information on whether your vehicle may benefit from the information. WE SUPPORT VOLUNTARY TECHNICIAN CERTIFICATION 2