PIC5910B

Bulletin No.: PIC5910B
Date: Feb-2015
Subject:
Malfunction Code B124B sym04 Set Current In HMI Module With No Other Observed Concern
Models:
2014 Buick LaCrosse
(Built on/or before August 26th, 2013)
2015 Buick LaCrosse
2015 Chevrolet Colorado (RPO IO4)
2015 GMC Canyon (RPO IO4)
This PI was superseded to update Model List. Please discard PIC5910A.
Condition/Concern
Vehicles listed above may set a false code B124B sym04 in the HMI module with no other concerns observed by the customer.
Recommendation/Instructions
Please do not replace any components due to this code.
LaCrosse Information:
For the 2014 Model year - Reprogram the HMI module with the latest calibrations in TIS2Web, which were released on 9/9/2013 to address this concern
For the 2015 Model year - Engineering is currently working on new calibrations to correct this concern. Please ignore DTC B124B sym04, this PI will be updated
when the new calibrations are available.
Colorado/Canyon Information:
Engineering is currently working on new calibrations to correct this concern. Please ignore DTC B124B sym04, this PI will be updated when the new calibrations
are available.
Note: This is not a USB program event.
Warranty Information
For vehicles repaired under warranty use:
Labor Operation
Description
Labor Time
2810335
HMI Reprogramming with SPS
0.3 hr
GM bulletins are intended for use by professional technicians, NOT a "do-it-yourselfer". They are written to inform these technicians of conditions that may
occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools,
safety instructions, and know-how to do a job properly and safely. If a condition is described, DO NOT assume that the bulletin applies to your vehicle, or that
your vehicle will have that condition. See your GM dealer for information on whether your vehicle may benefit from the information.
WE SUPPORT VOLUNTARY TECHNICIAN CERTIFICATION
1