PIP5272A

Bulletin No.: PIP5272A
Date: Aug-2015
Subject:
Low Oil Pressure After An Oil And Filter Change
Models:
2014-2015 Chevrolet Silverado
2015 Chevrolet Suburban, Tahoe
2014-2015 GMC Sierra
2015 Yukon Yukon XL
Engine 4.3L LV3 5.3 L83 6.2 L86
This PI was superseded to update Recommendation/Instructions. Please discard PIP5272.
Condition/Concern
Some customers may comment on an SES light P0521 and low oil pressure after an oil and filter change.
Recommendation/Instructions
If this is encountered and the oil and filter were just changed, inspect the oil filter part number.
The correct part number is PF63E 19330000.
The PF48 oil filter will fit, but can cause the oil pressure to go low and DTC P0521 to set.
PF63E part number 19330000 is for the GEN5 V6 and V8.
PF48 is for the GEN4 V8.
GM bulletins are intended for use by professional technicians, NOT a "do-it-yourselfer". They are written to inform these technicians of conditions that may
occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools,
safety instructions, and know-how to do a job properly and safely. If a condition is described, DO NOT assume that the bulletin applies to your vehicle, or that
your vehicle will have that condition. See your GM dealer for information on whether your vehicle may benefit from the information.
WE SUPPORT VOLUNTARY TECHNICIAN CERTIFICATION
1