JTB00563NAS1

Service Bulletin Details

Public Details for: JTB00563NAS1

Situation: on manual transmission-equipped vehicles only, the engine may stall during a transmission downshift, occurring when the driver of the vehicle does not allow the clutch to fully retract during downshifting.


- 2016 -

Models from 2016
2016 JAGUAR F-TYPE 
Page 1 of 7
JTB00563NAS1
09 JUN 2017
INFORMATION
https://topix.jaguar.jlrext.com/topix/service/document/796119
7/7/2017
Page 2 of 7
MODEL:
MODEL
YEAR:
VIN:
ASSEMBLY
PLANT:
https://topix.jaguar.jlrext.com/topix/service/document/796119
APPLICABILITY:
7/7/2017
Page 3 of 7

https://topix.jaguar.jlrext.com/topix/service/document/796119
7/7/2017
Page 4 of 7

NOTES:
◾
◾
https://topix.jaguar.jlrext.com/topix/service/document/796119
7/7/2017
Page 5 of 7
DESCRIPTION
SRO
TIME
(HOURS)
CONDITION
CODE
CAUSAL
PART
NOTE:
SERVICE INSTRUCTION:
DIAGNOSTIC PROCEDURE:
CAUTIONS:
◾ A Jaguar Land Rover-approved Midtronics battery power
supply must be connected to the vehicle battery during
diagnosis / module programming.
◾ All ignition ON/OFF requests MUST be carried out; failure to
perform these steps may cause damage to vehicle control
modules.
https://topix.jaguar.jlrext.com/topix/service/document/796119
7/7/2017
Page 6 of 7
NOTES:
◾ The Jaguar Land Rover-approved diagnostic tool must be
loaded with DVD149.03 and Calibration File 267 (or later).
◾ Use DDW to check for Service Action or Update Prior to Sale
notice eligibility requiring a Powertrain Control Module
(PCM) software update. If eligible, perform and claim the
update as per that program.
Diagnosis
Selected Symptoms
Powertrain - Engine system - Engine
performance - Engine speed dips
Powertrain - Engine system - Engine
performance - Engine stalls
continue
Recommendations
https://topix.jaguar.jlrext.com/topix/service/document/796119
7/7/2017
Page 7 of 7
Run
Configure existing module -
Powertrain control module
Session
Close Session
https://topix.jaguar.jlrext.com/topix/service/document/796119
7/7/2017

© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.