B17-030

Service Bulletin
17-030
September 15, 2017
07008 Version 1
Water Pump Seizes or the Drive Belt Is Shredded
AFFECTED VEHICLES
Year
Model
Trim
VIN range
2016
ILX 2.4L
ALL
ALL
2015–16
TLX 2.4L
ALL
ALL
SYMPTOM
The water pump seized or the drive belt shredded.
POSSIBLE CAUSES
The water pump bearing is out of specification.
CORRECTIVE ACTION
Replace the water pump and, if necessary, the drive belt.
REQUIRED MATERIALS
Part Name
Part Number
Quantity
Acura Antifreeze/Coolant Type 2
OL999-9011A
1
PARTS INFORMATION
Part Name
Part Number
Quantity
Water Pump
19200-RDF-A01
1
Drive Belt (ILX)
31110-5LA-A02
1
Drive Belt (TLX)
31110-5X6-J01
1
CLIENT INFORMATION: The information in this bulletin is intended for use only by skilled technicians who have the proper tools, equipment,
and training to correctly and safely maintain your vehicle. These procedures should not be attempted by “do-it-yourselfers,” and you should not
assume this bulletin applies to your vehicle, or that your vehicle has the condition described. To determine whether this information applies,
contact an authorized Acura automobile dealer.
© 2017 American Honda Motor Co., Inc. – All Rights Reserved
Page 1 of 2
WARRANTY CLAIM INFORMATION
The normal warranty applies.
Operation
Number
Description
Flat
Rate
Time
Defect
Code
Symptom Code
Template ID
Failed Part Number
1131A7
ILX: Replace the
water pump only.
1.4 hrs
02301
03217
B17030A
19200-RDF-A01
1131A7
ILX: Replace the
water pump and drive
belt.
1.4 hrs
02301
03217
B17030B
19200-RDF-A01
113100
TLX: Replace the
water pump only.
1.2 hrs
02301
03217
B17030C
19200-RDF-A01
113100
TLX: Replace the
water pump and drive
belt.
1.2 hrs
02301
03217
B17030D
19200-RDF-A01
Skill Level:
Repair Technician
REPAIR PROCEDURE
NOTE: This procedure is in an outline form. For more information, see the service information.
1. Drain the engine coolant.
2. Disconnect the 12-volt battery terminal.
3. Remove the drive belt.
4. Remove the drive belt auto tensioner.
5. Remove the alternator.
6. Remove the water pump.
7. Install the new water pump, and torque the bolts to 12 N·m (9 lb-ft).
8. Install the alternator, and torque the bolts to 45 N·m (33 lb-ft).
9. Install all remaining parts in the reverse order of removal.
NOTE: make sure you bleed the drive belt auto tensioner when you install it.
10. Fill the engine coolant.
END
Page 2 of 2