A011649 2041120-
Service Bulletin Details
Public Details for: A011649 2041120-
- 2015 - 2014 - 2013 - 2012 - 2011 -
Models from 2015
| 2015 AUDI Q5 |
| 2015 AUDI S4 |
| 2015 AUDI S5 |
| 2015 AUDI S5 CABRIOLET |
Models from 2014
| 2014 AUDI A6 |
| 2014 AUDI A7 |
| 2014 AUDI A8 |
| 2014 AUDI Q5 |
| 2014 AUDI S4 |
| 2014 AUDI S5 |
| 2014 AUDI S5 CABRIOLET |
Models from 2013
| 2013 AUDI A6 |
| 2013 AUDI A7 |
| 2013 AUDI A8 |
| 2013 AUDI Q5 |
| 2013 AUDI RS5 CABRIOLET |
| 2013 AUDI S4 |
| 2013 AUDI S5 |
Models from 2012
| 2012 AUDI A5 CABRIOLET |
| 2012 AUDI A6 |
| 2012 AUDI A7 |
| 2012 AUDI A8 |
| 2012 AUDI S4 |
| 2012 AUDI S5 |
Models from 2011
| 2011 AUDI A5 CABRIOLET |
| 2011 AUDI S4 |
| 2011 AUDI S5 |
Technical Service Bulletin 01 MIL on (DTC P042000 and/or P043000 - catalyst system, bank 1/2 efficiency below threshold) 01 16 49 2041120/3 January 11, 2016. Supersedes Technical Service Bulletin Group 01 number 15-36 dated July 29, 2015 for reasons listed below. Model(s) Year VIN Range Vehicle-Specific Equipment S4, S5, S5 Cabriolet 2011 - 2015 All 3.0 TFSI A6, A7 2012 - 2014 All 3.0 TFSI A8 2012 - 2014 All 3.0 TFSI Q5 2013 - 2015 All 3.0 TFSI Condition REVISION HISTORY Revision Date Purpose 3 - Revised Service (Added information about crankcase pressure regulating valve) Revised Warranty (Added time for replacement of crankcase pressure regulating valve) Revised Required Parts and Tools (Added entire section) 2 7/29/2015 Revised header data (Updated customer codes) 1 6/30/2015 Initial publication • MIL on. • DTC P042000 and/or P043000 (Catalyst system Bank 1/2, Efficiency below threshold) is stored in the engine control module (ECM), J623 (address word 01). Technical Background The diagnostic limitations were too narrow. Production Solution New ECM software implemented to correct the condition. © 2016 Audi of America, Inc. Page 1 of 4 All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. Technical Service Bulletin Service • If the vehicle is model year 2013 or newer, proceed to SVM Update Instructions. • If the vehicle is model year 2012 or older, check the repair history of the vehicle before proceeding: • If crankcase pressure regulating valve 06E103547H (or any newer suffix) has already been installed, no part update is necessary. Proceed to SVM Update Instructions. • If crankcase pressure regulating valve 06E103547H (or any newer suffix) has not been installed, install the latest part number before proceeding to SVM Update Instructions. SVM Update Instructions 1. Follow all instructions in TSB 2011732: 00 Software Version Management (SVM), operating instructions. 2. Update the ECM (J623) using the SVM action code as listed in the table below, if necessary. Model Old Software Part Number Old software version 8K5907551B (or higher) 0003 8K5907551E 0003 8K5907551G 0005 8R0907551 8R0907551 0004 8R0907551A 8R0907551A 0002 8R0907551C 8R0907551C 0003 8R0907551F 0005 8R0907551G 0005 4G0907551A 0009 4G0907551D 0005 4G0907551F 0005 S4,S5, 8K5907551C S5 Cabriolet 8K5907551E ALL 8K5907551F 8K5907551G 8R0907551E ALL 8R0907551F 8R0907551D 8R0907551G 4G0907551A A6/A7 New Software Version 8K5907551D 8K5907551D Q5 New Software Part Number 4G0907551D 4G0907551F © 2016 Audi of America, Inc. ALL SVM Code Input 02A210 02A210 02A210 Page 2 of 4 All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. Technical Service Bulletin A8 4G0907551G 4G0907551G 0004 4G0907551J 4G0907551J 0004 4H0907551E 4H0907551E 0010 4H0907551G 4H0907551G 0005 4H0907551J 0005 4H1927158DN 1002 4H0907551D ALL 02A210 4H0907551J 4H1927158AC Warranty Service Number: 2470 Damage Code: 0039 Labor Operations: For software update: Check software level in ECM only (with no updated needed) 2470 0199 Max 10 TU Check software level in ECM and perform update Max 50 TU 2470 2599 For crankcase pressure regulating valve installation, if necessary: S4, S5, S5 Cabriolet (2011 - 2012): Crankcase breather remove+reinstall 1050 1991 130 TU 2 Fuel distributor rail remove+reinstall 2441 2091 90 TU Compressor remove+reinstall 2114 1941 190 TU Fuel system pressure decrease 2003 0091 10 TU Crankcase breather remove+reinstall 1050 1991 130 TU 2 Fuel distributor rail remove+reinstall 2441 2091 90 TU Compressor remove+reinstall 2114 1941 160 TU Fuel system pressure decrease 2003 0050 10 TU 1050 1991 190 TU A6, A7 (2012): A8 (2012): Crankcase breather remove+reinstall © 2016 Audi of America, Inc. Page 3 of 4 All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. Technical Service Bulletin Diagnostic Time: 2 Fuel distributor rail remove+reinstall 2441 2091 90 TU Compressor remove+reinstall 2114 1941 160 TU Fuel system pressure decrease 2003 0050 10 TU GFF No allowance 0 TU Road test after service procedure 0121 0004 10 TU Technical diagnosis at dealer’s discretion (Refer to Section 2.2.1.2 and Audi Warranty Online for DADP allowance details) Claim Comment: As per TSB #2041120/2 All warranty claims submitted for payment must be in accordance with the Audi Warranty Policies and Procedures Manual. Claims are subject to review or audit by Audi Warranty. Required Parts and Tools Part Number Part Description Quantity 06E103547Q Crankcase pressure regulating valve 1 Additional Information The following Technical Service Bulletin will be necessary to complete this procedure: • TSB 2011732: 00 Software Version Management (SVM), operating instructions. All part and service references provided in this TSB (2041120) are subject to change and/or removal. Always check with your Parts Dept. and service manuals for the latest information. © 2016 Audi of America, Inc. Page 4 of 4 All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.