A151627 2043735-

Service Bulletin Details

Public Details for: A151627 2043735-

The mil is on due to dtcs for cam shift actuator "a" or "b" cylinder range/ performance beings stored in the ecm. Customer complains of occasional poor performance and that cruise control does not always work. Malfunction of the camshaft ad


- 2016 - 2015 -

Technical Service Bulletin
15 Camshaft adjuster implausible signal
15 16 27 2043735/1 March 23, 2016.
Model(s)
Year
VIN Range
Vehicle-Specific Equipment
All
2012 - 2016
All
1.8L and 2.0L TFSI
Condition
• MIL on.
• Customer complains of occasional poor performance and that cruise control does not always work.
• One of the following DTCs for cam shift actuator “A” or “B” cylinder range/performance is stored in the engine
control module, J623 (address word 01):
• DTC P11A200 (Cam shift actuator “A” cylinder 1 - range/performance)
• DTC P11A400 (Cam shift actuator “B” cylinder 1 - range/performance)
• DTC P11A600 (Cam shift actuator “A” cylinder 2 - range/performance)
• DTC P11B800 (Cam shift actuator “B” cylinder 6 - range/performance)
• DTC P11AA00 (Cam shift actuator “A” cylinder 3 - range/performance)
• DTC P11AC00 (Cam shift actuator “B” cylinder 3 - range/performance)
• DTC P11AE00 (Cam shift actuator “A” cylinder 4 - range/performance)
• DTC P11B000 (Cam shift actuator “B” cylinder 4 - range/performance)
Technical Background
Malfunction of the camshaft adjuster of the Audi valvelift system.
Production Solution
Not applicable.
Service
1. Proceed according to Guided Fault Finding
2. Replace the affected actuator with part number 06E103697L.
© 2016 Audi of America, Inc.
Page 1 of 2
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of
Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval
system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior
expressed written permission of the publisher.
Technical Service Bulletin
Warranty
Claim Type:
Use applicable claim type. If vehicle is outside any warranty, this Technical Service Bulletin
is informational only.
Service Number:
1551
Damage Code:
0040
Labor Operations: Adjusting mechanism for valvelift system remove+reinstall 1551 2015
70 TU
Diagnostic Time:
Time stated on
diagnostic
protocol
GFF
0150 0000
(Max 50 TU)
Road test prior to service procedure
No allowance
0 TU
Road test after service procedure
0121 0004
10 TU
Technical diagnosis at dealer’s discretion
(Refer to Section 2.2.1.2 and Audi Warranty Online for DADP allowance details)
Claim Comment:
As per TSB #2043735/1
All warranty claims submitted for payment must be in accordance with the Audi Warranty Policies and Procedures
Manual. Claims are subject to review or audit by Audi Warranty.
Required Parts and Tools
Part Number
Part Description
Quantity
06E103697L
Adjuster unit
1
Additional Information
All parts and service references provided in this TSB (2043735) are subject to change and/or removal. Always
check with your Parts Department and service manuals for the latest information.
© 2016 Audi of America, Inc.
Page 2 of 2
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of
Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval
system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior
expressed written permission of the publisher.


© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.