12-13-2016C
Service Bulletin Details
Public Details for: 12-13-2016C
New document
- 2018 -
2018 A4/S4/A4 allroad Audi Pre-Delivery Inspection Stock No. Dealer Number R.O. No. VIN Road test mileage out Road test mileage in Reminders All items must be completed prior to customer delivery by an Audi technician Audi recommends using an Audi approved battery charger to prevent excessive battery discharge during inspection ALL PDI function tests must be run in Guided Fault Finding (GFF) only. Do NOT use Guided Functions for any PDI related test as these will not be uploaded to the Paperless Server. Refer to the Special functions tab of ODIS Diagnosis for using GFF for PDI function tests It is advised to start ODIS with the engine running to enable all 5F Test Plans in GFF and also to ensure SVM sees all control units during the SVM check vehicle configuration For items marked with *, please refer to the PDI Technician Reference Document posted on ServiceNet for additional information Vehicle Preparation Trunk Inspection (continued) Check Elsa for open campaigns and updates Verify operation of emergency release handle Deactivate vehicle transport mode* This step must be performed with the engine off, and ignition on Install wheel bolt cover removal tool from PDI kit into trunk tool kit* Set adaption channel to enable CD Ripping (if equipped with NAV)* Set service reminder* Perform any open campaigns* Under the Hood Inspection Check battery clamps for proper torque* Perform a battery test* Check engine oil level* Check all fluid levels and top off if necessary Exterior Inspect exterior for damage, dings, dents and surface scratches Check all key buttons and features* Lighting and Windshield Test exterior lighting functions Install wiper blades Verify tool kit is installed securely in luggage compartment Verify inflatable repair kit and compressor are present Set spare tire pressure* Interior Verify operation of all seat belts and latches Check operation of window, lock, and seat controls* Inspect mirrors for proper operation* Check rear view mirror operation* Verify operation of all interior lights Verify SOS button is green and Roadside assistance button LED will remain off (if equipped) Verify operation of heated seats (if equipped) Verify proper operation of climate control* Inspect operation of all power outlets* Check panoramic sunroof and sunshade operation* Verify the glove compartment opens and closes properly Verify operation of front Passenger Occupant Detection System Test front washers (and headlight washers if equipped)* Settings Trunk Inspection Verify operation of MMI touch pad (if equipped) Verify trunk is operational Set Time to “Automatic setting” and “Automatic time zone” Effective 12-13-2016-US Version 1.0 PRE-DELIVERY INSPECTION (PDI) | 1 2018 A4/S4/A4 allroad Audi Pre-Delivery Inspection Settings (continued) On-Hoist Inspection (continued) Verify and set language and Measurement Units* Install wheel locks (if equipped) Verify Speech dialog system is operating* Install wheel bolt covers and center caps as supplied* Set “Entertain. Fad.” in Parking aid to Medium* Set and store tire pressures for either sold vehicle OR stock inventory vehicle* Load Onboard Video Tutorials* Set dealership location in navigation (if equipped)* Driving Performance Turn off Manual Speed Warning* Check horn operation Verify hold and release of electronic parking brake Media / Radio / SAT Verify engine performance and acceleration* Verify operation of AMI or aux. input (if equipped) Verify transmission operation, including shift paddles (if equipped) Verify operation of CD/DVD player (if equipped) Insert SD card and test function of all slots Test drive vehicle applying brakes several times* Program the presets to local stations Check steering/tire alignment Verify HD Radio is turned “off”* Check for squeaks, rattles and wind noise Audi connect (USA ONLY) (if equipped) Calibrate rear view mirror* Verify Audi connect Information Packet is present (if equipped)* Verify quality of radio reception in AM/FM/SiriusXM bands Driver Assistance Verify system connects to mobile network (if equipped). Review TSB 2042942 for additional information* Verify cruise control/ACC functionality (if equipped) Turn on the wireless network (if equipped)* Verify Audi side assist functionality (if equipped) Check Wi-Fi hotspot visibility. No data available at PDI (if equipped)* Verify operation of parking system (if equipped)* Verify all vehicle Head-up display functionality (if equipped)* Enable Google Earth (if equipped)* Activate NAV and follow directions back to dealership (if equipped) On-Hoist Inspection Perform a coolant reservoir cap pressure test* Post-Road Test Inspection Remove transport suspension blocks (follow ELSA instruction) Interrogate fault memory and print Diagnostic Log Check steering, boots, brake system, hoses, tires and wheels for damage Check underside of vehicle for fluid leaks and loose components Inspect wheel bolts for proper torque* Select reset interval in the MIB Service and Checks menu if it is not displaying correct 10K and 20K intervals Ensure the yellow tire pressure tag is installed on the steering wheel Apply Inventory Maintenance Sticker Install showroom charger to ensure battery remains charged at all times Technician I certify that all operations have been completed and this vehicle has been prepared in accordance with Audi Procedures and Quality Standards, and has met the standards for Perfect Delivery. Technician Signature Effective 12-13-2016-US Version 1.0 Last 8 of VIN Completion Date PRE-DELIVERY INSPECTION (PDI) | 2