PDI - 2015 A5-S5
Service Bulletin Details
Public Details for: PDI - 2015 A5-S5
This document contains the audi pre-delivery inspection checklist. All items must be completed prior to customer delivery by an audi technician. Audi recommends using an audi approved battery charger to prevent excessive battery discharge d
- 2015 -
Models from 2015
2015 AUDI A5 |
2015 AUDI RS5 CABRIOLET |
2015 AUDI S5 |
2015 A5/S5/RS 5 Coupé Audi Pre-Delivery Inspection Stock No. Dealer Number R.O. No. VIN Road test mileage out Road test mileage in Reminders All items must be completed prior to customer delivery by an Audi technician Audi recommends using an Audi approved battery charger to prevent excessive battery discharge during inspection It is advised to start ODIS with the engine running to enable all 5F Test Plans in GFF and also to ensure SVM sees all control units during the SVM check vehicle configuration Refer to the Special functions tab of ODIS Diagnosis using GFF for the PDI function tests For items marked with *, please refer to the PDI Technician Reference Document posted on ServiceNet for additional information Open Campaigns/Updates Lighting and Windshield Check Elsa for open campaigns and updates Test exterior lighting functions Transport Mode Deactivation, DTC Check, Set Service Reminder Test front washers (and rear/headlight washers if equipped)* Deactivate vehicle transport mode* Interior Perform any open campaigns * Inspect heated seats for proper operation (if equipped) Set adaption channel to enable CD Ripping (if equipped with NAV)* Verify operation of all seat belts and latches Set service reminder* Verify operation of front Passenger Occupant Detection System Verify proper operation of climate control* Under the Hood Inspection Check all fluid levels and top off if necessary Switches / Outlets and Windows Check battery clamps for proper torque* Check horn operation Check engine oil level* Check operation of window, lock, and seat controls* Perform a battery test* Check panoramic sunroof operation* Inspect mirrors for proper operation* Exterior Inspect operation of all power outlets* Check all key buttons and features* Verify operation of all interior lights Trunk Inspection Install wheel bolt cover removal tool from PDI kit into trunk lid toolkit* Set spare tire pressure (See separate “2015 Normal Load Condition Tire Pressure Table” posted on ServiceNet) Audi connect (USA ONLY) (if equipped) Check Wi-Fi hotspot functionality* Connect the dealer demo SIM card to verify system connects to mobile network* Enable Google Earth (if equipped)* Verify tool kit is installed securely in luggage compartment Turn on the wireless network* Verify trunk operation, including emergency release handle Verify Audi connect Information Packet is present* Effective 1-15-2015-US Version 1.3 PRE-DELIVERY INSPECTION (PDI) | 1 2015 A5/S5/RS 5 Coupé Audi Pre-Delivery Inspection Media / Radio / SAT Driver Assistance Insert SD card and test function of all slots Activate NAV and follow directions back to dealership (if equipped) Program the presets to local stations Verify Audi side assist functionality (if equipped) Verify HD Radio is turned “off”* Verify cruise control/ACC functionality (if equipped) Verify operation of AMI or aux. input (if equipped) Verify operation of Audi parking system (if equipped)* Verify operation of CD/DVD player (if equipped) Settings Driving Performance Load Onboard Video Tutorials* Calibrate rear view mirror* Set “Music volume while parking” to 6 lines* Check for squeaks, rattles and wind noise Set dealership location in navigation (if equipped)* Check steering/tire alignment Set Time source setting to “GPS” and set Auto daylight savings time to “on.”* Test drive vehicle applying brakes several times* Verify and set language and Measurement Units* Verify hold and release of parking brake Verify Voice Activation is operating (if equipped)* Verify quality of radio reception in AM/FM/SAT bands Verify engine performance and acceleration* Verify rear spoiler functionality (if equipped) (RS 5 only) On-Hoist Inspection Check steering, boots, brake system, hoses, tires and wheels for damage Verify transmission operation, including shift paddles (if equipped) Check underside of vehicle for fluid leaks and loose components Post-Road Test Inspection Inspect wheel bolts for proper torque* Apply Inventory Maintenance Sticker Install wheel bolt covers and center caps as supplied* Ensure the yellow tire pressure tag is installed on the steering wheel Remove transport suspension blocks (follow ELSA instruction) Set and store tire pressures for either sold vehicle OR stock inventory vehicle (See separate “2015 Normal Load Condition Tire Pressure Table” posted on ServiceNet)* Install showroom charger to ensure battery remains charged at all times Interrogate fault memory and print Diagnostic Log Record final mileage and sign checklist Technician I certify that all operations have been completed and this vehicle has been prepared in accordance with Audi Procedures and Quality Standards, and has met the standards for Perfect Delivery. Technician Signature Effective 1-15-2015-US Version 1.3 Last 8 of VIN Completion Date PRE-DELIVERY INSPECTION (PDI) | 2