V281404 2037386

Technical Bulletin
Model(s)
Year
Jetta, Jetta
Wagon
2009-2010
(A6) Golf, Jetta,
Jetta
SportWagen,
(A7) Golf
2010-2015
Passat
2012-2015
Eng. Code
Trans. Code
VIN Range From
VIN Range To
All
All
All
All
All
All
All
All
All
All
All
All
2.0L TDI
(CBEA,CJAA)
2.0L TDI
(CJAA, CRUA,
CVCA)
2.0L TDI
(CKRA, CVCA)
2.0L TDI
Beetle, Beetle
Convertible
2012-2015
(CJAA, CRUA,
CVCA)
Condition
28 14 04 September 24, 2014 2037386 Supersedes Technical Bulletin V281403 dated July 11, 2014 to include
model year 2015 applicability.
MIL ON - Glow Plug Pressure Sensor Faults Stored in ECM Fault Memory
DTC
Description
P13CE
Sensor for internal pressure of cylinder 1 Electrical
error
P13CF
Sensor for internal pressure of cylinder 1 Short
circuit to ground
P13D0
Sensor for internal pressure of cylinder 1
Implausible signal
P13D1
Sensor for internal pressure of cylinder 2 Electrical
error
P13D2
Sensor for internal pressure of cylinder 2 Short
circuit to ground
P13D3
Sensor for internal pressure of cylinder 2
Implausible signal
Page 1 of 9
© 2014 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice.
No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or
otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Technical Bulletin
P13D4
Sensor for internal pressure of cylinder 3 Electrical
error
P13D5
Sensor for internal pressure of cylinder 3 Short
circuit to ground
P13D6
Sensor for internal pressure of cylinder 3
Implausible signal
P13D7
Sensor for internal pressure of cylinder 4 Electrical
error
P13D8
Sensor for internal pressure of cylinder 4 Short
circuit to ground
P13D9
Sensor for internal pressure of cylinder 4
Implausible signal
P13E0
Sensor for internal pressure of cylinder 1
Malfunction
P13E1
Sensor for internal pressure of cylinder 2
Malfunction
P13E2
Sensor for internal pressure of cylinder 3
Malfunction
P13E3
Sensor for internal pressure of cylinder 4
Malfunction
Technical Background
When diagnosing MIL ON with glow plug pressure sensor DTC’s it important to perform diagnosis prior to
replacing the glow plug.
Production Solution
Implemented into production.
Page 2 of 9
© 2014 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice.
No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or
otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Technical Bulletin
Service
Step 1:
When diagnosing a glow plug pressure sensor DTC, before replacing the glow plug, first check for loose
connections. You can check for any loose connections by performing a push or pull test of the connectors. If on a
push test, a click can be felt or on a pull test, the connector comes off very easily, the connection is most likely the
cause. Properly seat the connector, clear any DTCs, and test drive the vehicle. DO NOT replace the glow plug
if a loose connection is found and no faults return after test drive. If fault returns, continue to step 2.
Step 2:
A check of the glow plug can be performed by swapping the glow plug from the affected cylinder with the glow plug
from an adjacent cylinder without a fault.
Note:
Ensure when re-securing the connector that connector is fully seated.
After swapping the glow plug(s), perform a test drive of the vehicle to attempt to duplicate the DTC.
Note:
It may take two drive cycles for the MIL to illuminate.
If after swapping the glow plug, the DTC follows the glow plug, there is a faulty glow plug. Replace the glow plug.
If the DTC stays in the same cylinder after swapping the glow plug continue to step 3.
Step 3: Glow plug wiring harness and connectors should be checked.
While checking the harness you can monitor MVB 141 or in UDS equipped vehicles monitor the
Maximal_Cylinder_Pressure_Cyllinder_X values for each cylinder while manipulating the harness and connectors,
watching for changes in the readings. If the harness is found to be at fault, replace the harness.
Page 3 of 9
© 2014 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice.
No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or
otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Technical Bulletin
Warranty
Step 1
To determine if this procedure is covered under Warranty, always refer to the Warranty Policies and
1)
Procedures Manual
Model(s)
Year(s)
Jetta, Jetta
Wagon (A5)
2009-2010
Eng. Code(s)
Trans. Code(s)
VIN Range From
VIN Range To
All
All
All
All
All
All
All
All
All
All
All
All
2.0L TDI
(CBEA,CJAA)
(A6) Golf, Jetta,
Jetta
SportWagen,
(A7) Golf
2010-2015
Passat
2012-2015
2.0L TDI
(CJAA, CRUA,
CVCA)
2.0L TDI
(CKRA, CVCA)
2.0L TDI
Beetle, Beetle
Convertible
2012-2015
(CJAA, CRUA,
CVCA)
SAGA Coding
Claim Type:
Use applicable Claim Type
1)
Damage
Service Number:
HST
Damage Location
(Depends on Service No.)
--
Use applicable when
indicated in ElsaWeb
(L/R)
Code
9752
0028
Parts Manufacturer
3)
Golf, Passat
WWO
Jetta, Jetta Sportwagen, Beetle,
Beetle Convertible
3ME
Labor Operation : Engine Wiring Harness
Connection Repair
2)
2)
97524199 = 10 TU
Page 4 of 9
© 2014 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice.
No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or
otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Technical Bulletin
Causal Part: Select Labor operation
97524199
Diagnostic Time
4)
GFF Time expenditure
01500000 = 20 TU max.
YES
Road Test
01210004 = 10 TU
YES
01320000 = 30 TU max.
YES
Technical Diagnosis
(Includes wiring checks)
Claim Comment: Input “As per Technical Bulletin 2037386” in comment section of Warranty Claim.
1)
Vehicle may be outside any Warranty in which case this Technical Bulletin is informational only
2)
Code per warranty vendor code policy.
3)
Labor Time Units (TUs) are subject to change with ELSA updates.
4)
Documentation required per Warranty Policies and Procedures Manual.
OR
Step 2
To determine if this procedure is covered under Warranty, always refer to the Warranty Policies and
1)
Procedures Manual
Model(s)
Year(s)
Jetta, Jetta
Wagon (A5)
2009-2010
Eng. Code(s)
Trans. Code(s)
VIN Range From
VIN Range To
All
All
All
All
All
All
All
All
All
All
All
All
2.0L TDI
(CBEA,CJAA)
(A6) Golf, Jetta,
Jetta
SportWagen,
(A7) Golf
2010-2015
Passat
2012-2015
2.0L TDI
(CJAA, CRUA,
CVCA)
2.0L TDI
(CKRA, CVCA)
2.0L TDI
Beetle, Beetle
Convertible
2012-2015
(CJAA, CRUA,
CVCA)
Page 5 of 9
© 2014 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice.
No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or
otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Technical Bulletin
SAGA Coding
Claim Type:
Use applicable Claim Type
1)
Damage
Service Number:
HST
Damage Location
(Depends on Service No.)
--
Use applicable when
indicated in ElsaWeb
(L/R)
Code
2884
0040
Jetta, Jetta Sportwagen, Beetle,
Beetle Convertible, Passat, Golf
Parts Manufacturer
BEO
2)
Passat
3)
Labor Operation : Glow plug removed+reinstalled
28841933 = 40 TU
OR
3)
Labor Operation : 4 Glow plugs
removed+reinstalled
28842033 = 50 TU
Jetta, Jetta Sportwagen, Golf, Beetle, Beetle Convertible
3)
Labor Operation : Glow plug
removed+reinstalled
28841933 = 50 TU
OR
3)
Labor Operation : 4 Glow plugs
removed+reinstalled
28842033 = 70 TU
2015 Golf
3)
Labor Operation : Glow plug
removed+reinstalled
28841905 = 30 TU
OR
3)
Labor Operation : 4 Glow plugs
removed+reinstalled
28842005 = 40 TU
Causal Part: Glow Plug
03L 905 061G
Diagnostic Time
4)
Page 6 of 9
© 2014 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice.
No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or
otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Technical Bulletin
GFF Time expenditure
01500000 = 40 TU max.
YES
Road Test
01210004 = 10 TU
YES
01320000 = 90 TU max.
YES
Technical Diagnosis
(Includes additional drive cycles)
Claim Comment: Input “As per Technical Bulletin 2037386” in comment section of Warranty Claim.
1)
Vehicle may be outside any Warranty in which case this Technical Bulletin is informational only
2)
Code per warranty vendor code policy.
3)
Labor Time Units (TUs) are subject to change with ELSA updates.
4)
Documentation required per Warranty Policies and Procedures Manual.
OR
Step 3
To determine if this procedure is covered under Warranty, always refer to the Warranty Policies and
1)
Procedures Manual
Model(s)
Year(s)
Jetta, Jetta
Wagon (A5)
2009-2010
Eng. Code(s)
Trans. Code(s)
VIN Range From
VIN Range To
All
All
All
All
All
All
All
All
All
All
All
All
2.0L TDI
(CBEA,CJAA)
(A6) Golf, Jetta,
Jetta
SportWagen,
(A7) Golf
2010-2015
Passat
2012-2015
2.0L TDI
(CJAA, CRUA,
CVCA)
2.0L TDI
(CKRA, CVCA)
2.0L TDI
Beetle, Beetle
Convertible
2012-2015
(CJAA, CRUA,
CVCA)
SAGA Coding
Page 7 of 9
© 2014 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice.
No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or
otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Technical Bulletin
Claim Type:
Use applicable Claim Type
1)
Damage
Service Number:
HST
Damage Location
(Depends on Service No.)
--
Use applicable when
indicated in ElsaWeb
(L/R)
Code
9752
0040
Parts Manufacturer
Golf, Passat
WWO
Jetta, Jetta Sportwagen, Beetle,
Beetle Convertible,
3ME
2)
2)
Passat
3)
Labor Operation : Remove and Install Engine
Wiring Harness (CKRA)
97521933 = 290 TU
3)
Labor Operation : Remove and Install Engine
Wiring Harness (Gen 3 CVCA)
97521905 = 420 TU
Jetta, Jetta Sportwagen, Golf, Beetle, Beetle Convertible
3)
Labor Operation : Remove and Install Engine
Wiring Harness
97521933 = 330 TU
2015 Golf
3)
Labor Operation : Remove and Install Engine
Wiring Harness (Gen 3)
97521905 = 290 TU
Causal Part: Engine Harness
03L 971 *** (See ETKA)
Diagnostic Time
GFF Time expenditure
Road Test
4)
01500000 = 60 TU max.
YES
01210004 = 10 TU
YES
01320000 = 120 TU max.
YES
Technical Diagnosis
(Includes wiring harness checks)
Claim Comment: Input “As per Technical Bulletin 2037386” in comment section of Warranty Claim.
1)
Vehicle may be outside any Warranty in which case this Technical Bulletin is informational only
Page 8 of 9
© 2014 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice.
No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or
otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Technical Bulletin
2)
Code per warranty vendor code policy.
3)
Labor Time Units (TUs) are subject to change with ELSA updates.
4)
Documentation required per Warranty Policies and Procedures Manual.
Required Parts and Tools
Part No:
Part Description
Quantity
03L 905 061G
Glow Plug
As required
03L 971 *** (See ETKA)
Engine Harness
As required
Tool Description
Tool No:
Midtronics Battery Tester/Charger
InCharge 940 (INC-940)
or
GRX3000VAS
VAS Diagnostic Tool
VAS 6150/X & VAS 6160/X with
ODIS Service with: current online updates
Additional Information
All part and service references provided in this Technical Bulletin are subject to change and/or removal.
Always check with your Parts Dept. and Repair Manuals for the latest information.
Page 9 of 9
© 2014 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice.
No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or
otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.