NTB16-094a

Classification:
Reference:
EL15-040a
Date:
NTB16-094a
November 3, 2016
2013-2015 PATHFINDER; DOOR MIRROR WILL NOT
RETURN TO SET POSITION AFTER SHIFTING
FROM REVERSE TO DRIVE
This bulletin has been amended. The Title has been modified, and references to Automatic Drive
Positioner have been changed to Seat Control Unit. No other changes have been made.
Please discard all previous versions.
APPLIED VEHICLES:
APPLIED VIN:
APPLIED DATE:
2013 – 2015 Pathfinder (R52) equipped with ADP
2014 Pathfinder Hybrid (R52) equipped with ADP
2013 – 2014 vehicles: All
2015 vehicles: Built before 5N1AR2M(**)FC 661844
Built before April 7, 2015
IF YOU CONFIRM
The door mirror (LH and RH) automatic tilt down-up feature does not return to the original
position after shifting from reverse to drive.
ACTION
Replace the Seat Control Unit.

Use the new part listed in the Parts
Information.

For replacement information, refer to
the appropriate Electronic Service
Manual (ESM) Section J, Body
Interior, ADP-Automatic Drive
Positioner, DRIVER SEAT
CONTROL UNIT, Removal and
Installation.
Seat
Control Unit
Nissan Bulletins are intended for use by qualified technicians, not 'do-it-yourselfers'. Qualified technicians are
properly trained individuals who have the equipment, tools, safety instruction, and know-how to do a job
properly and safely. NOTE: If you believe that a described condition may apply to a particular vehicle, DO
NOT assume that it does. See your Nissan dealer to determine if this applies to your vehicle.
1/2
PARTS INFORMATION
DESCRIPTION
PART NUMBER
QUANTITY
CONTROLLER ASSEMBLY-POWER SEAT
28565 – 3JA1A
1
CLAIMS INFORMATION
Submit a Primary Part (PP) type claim using the following claims coding:
DESCRIPTION
PFP
OP CODE
SYM
DIA
FRT
Replace Seat Control Unit
(1)
VH72AA
HD
32
(2)
(1) Refer to the electronic parts catalog (FAST) and use the Power Seat Controller
(28565-*****) as the Primary Failed Part.
(2) Reference the current Nissan Warranty Flat Rate Manual and use the indicated FRT.
2/2
NTB16-094a