A941561 2022410-

Technical Service Bulletin
94 Right daytime running light is inoperative in Coming Home mode (DTC 02746)
94 15 61 2022410/7 February 13, 2015. Supersedes Technical Service Bulletin Group 97 number 11-23 dated
March 31, 2011 for reasons listed below.
Model(s)
Year
VIN Range
Vehicle-Specific Equipment
Q7
2010 - 2011
All
Not Applicable
Condition
REVISION HISTORY
Revision
Date
Purpose
7
-
Revised Service (Updated Tip with reference to another TSB)
6
3/31/2011
Revised header (Removed VIN Range)
Revised Service
5
2/9/2011
Revised header (Added VIN range)
Revised Warranty (Changed Damage Code)
4
1/5/2011
Revised Condition, Service, Required Parts and Tools
3
10/28/2010
Revised Technical Background, Service (Added solution), Warranty (Added
warranty table)
2
4/29/2010
Revised Condition (Corrected DTC code), Technical Background, and Production
Solution
1
1/29/2010
Original publication
• When the vehicle is in Coming Home mode, the right LED daytime running light is sporadically inoperative.
• The daytime running lights and fog lights operate correctly.
• The front fog lights and the left daytime running light work correctly.
• DTC 02746 (Right daytime running lamp bulb) with fault symptom 007 (Short circuit to ground) is stored in the
vehicle electrical system control module, J519 (address word 09).
Tip: Coming Home mode is a convenience function that allows the front lights (headlights or daytime
running lights) and taillights to remain on for a defined time (up to 60 seconds) when the vehicle is exited.
© 2015 Audi of America, Inc.
Page 1 of 3
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of
Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval
system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior
expressed written permission of the publisher.
Technical Service Bulletin
Technical Background
Different current cycles between the left and right headlamps in the first 100µs after the Coming Home function is
activated cause the right daytime running light to be switched off.
Production Solution
Improved vehicle electrical system control module installed in production.
Service
The J519 control module cannot be updated and must be replaced. Do not replace either headlamp for this
condition.
Replace the J519 control module with one of the following updated versions, depending on factory equipment.
Reference ETKA for the correct part number:
• 4F0910279AG: For vehicles equipped with power adjustable steering column (PR Code 2C7)
• 4F0910279AH: For vehicles equipped with manually adjustable steering column (PR Code 2C5)
Tip: When adapting the daytime running lamps on the replacement module, leave the default setting as Off.
Changing this setting can result in static DTCs (DTC 01494 and 01498) in J519. For information on changing the
default setting, reference TSB #2023283.
© 2015 Audi of America, Inc.
Page 2 of 3
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of
Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval
system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior
expressed written permission of the publisher.
Technical Service Bulletin
Warranty
Claim Type:
Use applicable claim type. If vehicle is outside any warranty, this Technical Service Bulletin
is informational only.
Service Number:
9710
Damage Code:
0040
Labor Operations: Remove and install lower dashboard
Diagnostic Time:
6818 1900
30 TU
Replace vehicle electrical system control module (J519)
9710 5550
30 TU
GFF
0150 0000
Time stated
on diagnostic
protocol
(30 TU max)
Road test prior to service procedure
No allowance 0 TU
Road test after service procedure
No allowance 0 TU
Technical diagnosis at dealer’s discretion
(Refer to Section 2.2.1.2 and Audi Warranty Online for DADP allowance details)
Claim Comment:
As per TSB #2022410/7
All warranty claims submitted for payment must be in accordance with the Audi Warranty Policies and Procedures
Manual. Claims are subject to review or audit by Audi Warranty.
Required Parts and Tools
Part Number
Part Description
Quantity
4F0910279AG
Vehicle Electrical System Control Module J519
1
4F0910279AH
Vehicle Electrical System Control Module J519
1
Additional Information
All parts and service references provided in this TSB (2022410) are subject to change and/or removal. Always
check with your Parts Department and service manuals for the latest information.
© 2015 Audi of America, Inc.
Page 3 of 3
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of
Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval
system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior
expressed written permission of the publisher.