A011528 2040508-
Service Bulletin Details
Public Details for: A011528 2040508-
Models from 2015
2015 AUDI A3 |
2015 AUDI A3 CABRIOLET |
2015 AUDI A4 |
2015 AUDI A4 ALLROAD |
2015 AUDI A5 |
2015 AUDI A5 CABRIOLET |
2015 AUDI A6 |
2015 AUDI A7 |
2015 AUDI A8 |
2015 AUDI Q5 |
Models from 2014
2014 AUDI A3 |
2014 AUDI A4 |
2014 AUDI A4 ALLROAD |
2014 AUDI A5 |
2014 AUDI A5 CABRIOLET |
2014 AUDI A6 |
2014 AUDI A7 |
2014 AUDI A8 |
2014 AUDI Q5 |
Technical Service Bulletin 01 MIL on (DTC P046100 stored in ECM) 01 15 28 2040508/2 June 30, 2015. Supersedes Technical Service Bulletin Group 01 number 15-21 dated April 29, 2015 for reasons listed below. Model(s) Year VIN Range Vehicle-Specific Equipment A3, A3 Cabriolet, A4, A5, A5 Cabriolet, A6, A7, A8, Q5 2014 - 2015 All 2.0 and 3.0 TFSI Condition REVISION HISTORY Revision Date Purpose 2 - Revised Service (Updated A6 and A7 information in SVM table) 1 4/29/2015 Initial publication • MIL on. • DTC P046100 (Fuel level sensor circuit Range/Performance) is stored in the engine control module (ECM), J623 (address word 01). Technical Background DTC P046100 can be caused by miscalculations within the ECM software. Production Solution New ECM software implemented to correct the condition. © 2015 Audi of America, Inc. Page 1 of 3 All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. Technical Service Bulletin Service SVM Update Instructions 1. Follow all instructions in TSB 2011732: 00 Software Version Management (SVM), operating instructions. 2. Update the ECM (J623) using the SVM action code as listed in the table below if necessary. Model Engine Old Software Part Number Old Software Version 5G0906259A 8V0906259B A3, A3 cab 1.8L & 2.0L TFSI 8V0906253E 8V0906254A 8K5907551F 8K5907551G 8K5907115M (or higher) 5G0906259A 0006 8V0906259H 0001 8V0906264D 0004 8K5907551G 0004 SVM Code Input 01A203 01A203 8K5907115K 2.0L & 3.0L TFSI New Software Version All 8V0906254E A4, A5, A5 cabriolet New Software Part Number 8K5907115M 0003 8K5907115N 0003 All 8K5907115J 8K5907115M 4G0907551A 4G0907551A 0008 4G0907551D 4G0907551D 0004 4G0907551F 0005 4G0907551G 4G0907551G 0004 4G0907551J 4G0907551J 0003 02A210 A6, A7 3.0L TFSI 4G0907551F All 4H0906014J A8 3.0L TFSI 4H0907557D 8R0907551E Q5 2.0L & 3.0L TFSI 8R0907551F 8R0907551D 8R0907551G © 2015 Audi of America, Inc. 4H0906014J 0005 4H0907557D 0005 8R0907551F 0004 8R0907551G 0004 01A203 All All 01A203 Page 2 of 3 All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. Technical Service Bulletin 8R1907115F 8R1907115L 8R1907115H 8R1907115M 8R1907115L 0003 8R1907115M 0002 Warranty Claim Type: Use applicable claim type. If vehicle is outside any warranty, this Technical Service Bulletin is informational only. Service Number: 2470 Damage Code: 0039 Labor Operations: Check software level in ECM only (with no updated needed) Diagnostic Time: 2470 0199 Max 10 TU Check software level in ECM and perform update 2470 2599 Max 50 TU GFF No allowance 0 TU Road test after service procedure 0121 0004 10 TU Technical diagnosis at dealer’s discretion (Refer to Section 2.2.1.2 and Audi Warranty Online for DADP allowance details) Claim Comment: As per TSB #2040508/2 All warranty claims submitted for payment must be in accordance with the Audi Warranty Policies and Procedures Manual. Claims are subject to review or audit by Audi Warranty. Additional Information The following Technical Service Bulletin will be necessary to complete this procedure: • TSB 2011732 00 Software Version Management (SVM), operating instructions. All part and service references provided in this TSB (2040508) are subject to change and/or removal. Always check with your Parts Dept. and service manuals for the latest information. © 2015 Audi of America, Inc. Page 3 of 3 All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.