A461515 2033674-

Service Bulletin Details

Public Details for: A461515 2033674-

Supersedes technical service bulletin group 46 number 14-75 dated march 12, 2014. Customer may complain about brake squeak or squeal with light to moderate pedal pressure.


- 2013 - 2012 - 2011 - 2010 - 2009 - 2008 -

Models from 2008
2008 AUDI A5
Technical Service Bulletin
46 Squealing from front brakes (PR-1LA or 1LB)
46 15 15 2033674/8 June 29, 2015. Supersedes Technical Service Bulletin Group 46 number 14-75 dated March
12, 2014 for reasons listed below.
Model(s)
Year
VIN Range
Vehicle-Specific Equipment
A4
2009 - 2012
All
PR 1LA or 1LB
A4
2013
A5
2008 - 2012
All
PR 1LA or 1LB
A5
2013
000001 - 025203
PR 1LA or 1LB
A5 cabriolet
2010 - 2012
All
PR 1LA or 1LB
A5 cabriolet
2013
000001 - 005663
PR 1LA or 1LB
A6
2012
All
PR 1LA
A6
2013
000001 - 049928
PR 1LA
N000001 - N020500
A000001 - A125000
PR 1LA or 1LB
Condition
REVISION HISTORY
Revision
Date
Purpose
8
-
Revised header data (Updated applicable models)
Revised Service (Procedure updates)
7
3/12/2014
Revised Technical Background (Updated pad wear limit)
6
2/25/2014
Revised header data (Updated engine codes)
Customer may complain about brake squeak or squeal with light to moderate pedal pressure.
© 2015 Audi of America, Inc.
Page 1 of 3
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of
Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval
system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior
expressed written permission of the publisher.
Technical Service Bulletin
Technical Background
If any of the below conditions occur, this TSB does not apply.
1.
Front brake discs or brake pads are close to their wear
limit (disc wear limit: 28 mm and pads wear limit with
backing plate and dampening plate: 10 mm).
2.
Foreign objects between brake disc and brake pad, such
as small stones, grit, rust build-up, or sand.
3.
Un-ground or corroded friction materials.
4.
Metallic deposits from disc material in brake pad (Figure
1).
Figure 1. Metallic deposits.
Production Solution
Anti-seize lubricant (G 052560A2) applied to the front brake guide pins in production from 9/3/2012.
Service
Apply a thin coat of anti-seize (G 052560A2)
lubricant to the guide pins of the front caliper
carriers (Figure 2).
Figure 2. Caliper carrier guide pins with anti-seize (G
052560A2) lubricant applied where the pads make contact.
© 2015 Audi of America, Inc.
Page 2 of 3
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of
Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval
system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior
expressed written permission of the publisher.
Technical Service Bulletin
Warranty
There must be an original customer complaint of the specified symptom on the repair order for this Technical
Service Bulletin to apply. Adding this procedure on is not permitted.
Claim Type:
110
Service Number:
4617
Damage Code:
0020
Labor Operations:
2 Front brake calipers removed and reinstalled
4739 2000
70 TU
Clean guide pins and apply anti-seize
4739 9999
10 TU
GFF
No allowance
0 TU
Road test prior to service procedure
0121 0002
10 TU
Road test after service procedure
0121 0004
10 TU
Diagnostic Time:
Technical diagnosis at dealer’s discretion
(Refer to Section 2.2.1.2 and Audi Warranty Online for DADP allowance details)
Claim Comment:
As per TSB #2033674/8
All warranty claims submitted for payment must be in accordance with the Audi Warranty Policies and Procedures
Manual. Claims are subject to review or audit by Audi Warranty.
Required Parts and Tools
Part Number
Part Description
Quantity
G 052560A2
Anti-seize lubricant
0.1
Additional Information
All parts and service references provided in this TSB (2033674) are subject to change and/or removal. Always
check with your Parts Department and service manuals for the latest information.
© 2015 Audi of America, Inc.
Page 3 of 3
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of
Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval
system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior
expressed written permission of the publisher.


© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.