PDI - 2016 TT Ro

Service Bulletin Details

Public Details for: PDI - 2016 TT Ro

This document contains the audi pre-delivery guidelines checklist.All items must be completed prior to customer delivery by an audi technician. Audi recommends using an audi approved battery charger to prevent excessive battery discharge du


- 2016 -

2016
TT/TTS Roadster
Audi Pre-Delivery Inspection
Stock No.
Dealer Number
R.O. No.
VIN
Road test mileage out
Road test mileage in
Reminders
 All items must be completed prior to customer delivery by an Audi technician
 Audi recommends using an Audi approved battery charger to prevent excessive battery discharge during inspection
 Refer to the Special functions tab of ODIS Diagnosis using GFF for the PDI function tests
 It is advised to start ODIS with the engine running to enable all 5F Test Plans in GFF and also to ensure SVM sees all control units
during the SVM check vehicle configuration
 For items marked with *, please refer to the PDI Technician Reference Document posted on ServiceNet for additional information
Vehicle Preparation
Trunk Inspection (continued)
 Check Elsa for open campaigns and updates
 Verify tire repair kit and compressor are present
 Deactivate vehicle transport mode*
 Set spare tire pressure*
 Set adaption channel to enable CD Ripping (if equipped with
NAV)*
Interior
 Set service reminder*
 Verify operation of all seat belts and latches
 Perform any open campaigns*
 Check operation of window, lock, and seat controls*
 Inspect mirrors for proper operation*
Under the Hood Inspection
 Check battery clamps for proper torque*
 Perform a battery test*
 Check engine oil level*
 Check all fluid levels and top off if necessary
Exterior
 Check all key buttons and features*
Lighting and Windshield
 Test exterior lighting functions
 Install wiper blades
 Test windshield washers
Trunk Inspection
 Verify trunk lid is operational
 Verify operation of emergency release handle
 Check rear view mirror operation*
 Verify operation of all interior lights
 Check heated steering wheel operation (if equipped)
 Verify operation heated seats
 Verify proper operation of climate control*
 Inspect operation of all power outlets*
 Verify operation of front Passenger Occupant Detection
System
Settings
 Verify operation of MMI touch pad
 Set Time source setting to “GPS” and set Auto daylight
savings time to “on.”*
 Verify and set language and Measurement Units*
 Verify operation of speech dialogue system (if equipped)*
 Set dealership location in navigation (if equipped)*
 Install wheel bolt cover removal tool from PDI kit into trunk
tool kit*
 Verify tool kit is installed securely in luggage compartment
Effective 6-19-2015-US
Version 1.0
PRE-DELIVERY INSPECTION (PDI) | 1
2016
TT/TTS Roadster
Audi Pre-Delivery Inspection
Media / Radio / SAT
Driving Performance (continued)
 Verify operation of both USB ports and aux. input
 Verify rear spoiler functionality
 Verify operation of CD/DVD player
 Verify quality of radio reception in AM/FM/SiriusXM bands
 Insert SD card and test function of all slots
 Calibrate rear view mirror*
 Program the presets to local stations
Driver Assistance
Audi connect (USA ONLY) (if equipped)
 Verify all cruise control functions
 Verify Audi connect Information Packet is present*
 Verify Audi side assist functionality (if equipped)
 Connect the dealer demo SIM card to verify system connects
to mobile network*
 Activate NAV and follow directions back to dealership (if
equipped)
 Turn on the wireless network*
 Verify operation of parking system*
 Check Wi-Fi hotspot functionality*
Convertible Functionality (if equipped)
 Enable Google Earth*
 Test operation of power folding top*
On-Hoist Inspection
 Verify convertible top manual closing tools are present
 Remove transport suspension blocks (follow ELSA instruction)
Post-Road Test Inspection
 Check steering, boots, brake system, hoses, tires and wheels
for damage
 Check underside of vehicle for fluid leaks and loose components
 Inspect wheel bolts for proper torque*
 Install wheel bolt covers and center caps as supplied*
 Interrogate fault memory and print Diagnostic Log
 Ensure the yellow tire pressure tag is installed on the steering wheel
 Apply Inventory Maintenance Sticker
 Install showroom charger to ensure battery remains
charged at all times
 Set and store tire pressures for either sold vehicle OR stock
inventory vehicle*
Driving Performance
 Check horn operation
 Verify hold and release of parking brake
 Verify engine performance and acceleration*
 Verify transmission operation, including shift paddles
 Test drive vehicle applying brakes several times*
 Check steering/tire alignment
 Check for squeaks, rattles and wind noise
Technician
I certify that all operations have been completed and this vehicle has been prepared in accordance with Audi Procedures and
Quality Standards, and has met the standards for Perfect Delivery.
Technician Signature
Effective 6-19-2015-US
Version 1.0
Last 8 of VIN
Completion Date
PRE-DELIVERY INSPECTION (PDI) | 2


© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.