TT 91-16-03

Service Bulletin Details

Public Details for: TT 91-16-03

Beetle-coding the replacement instrument cluster


- 2006 - 2005 - 2004 - 2003 - 2002 - 2001 - 2000 -

Tech Tips
Date: January 29, 2016
TT 91-16-03
2000-2006 Beetle-Coding the Replacement Instrument Cluster
Prior to removing the instrument cluster read the current Coding and Adaptation in channel 9 and record
the mileage in KM.
1. Install the new cluster into the vehicle and perform the immobilizer adaptation
2. After scanning the vehicle in Odis, select Vehicle OBD > Right click on Address Word 17 and select
control module OBD
3. Select coding and code the control module accordingly with the exception of the 3 rd digit from the
right. This digit should be changed to a 3 (XX3XX) or (X3XX) depending on coding
4. Select the drop down box and select adaptation and enter channel 9 and enter the mileage in KM
If the original cluster was non responsive. You can calculate the mileage from its current mileage,
(multiply mileage x 1.609 to convert to kilometers and then multiply kilometers x .10). Once
the adaptation value is entered (up to 5 digits,) it will also be necessary to perform address word 19
gateway coding, since this control module is integrated with the instrument cluster - code gateway to
06.
5. If adaptation will not complete, select the drop down box and select “Access Authorization” and use
log in “13861” and reattempt step 4
6. Once the mileage has been accepted, reselect “coding and change the 3rd digit from 3 to 2 and
save. Mileage will display in miles
Page 1 of 1
ver1.2
© 2016 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these
materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.


© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.