TT 93-15-01
Service Bulletin Details
Public Details for: TT 93-15-01
Tech tips: ensuring proper torque specifications when installing high voltage cables
Models from 2016
2016 VOLKSWAGEN JETTA HYBRID |
Models from 2015
2015 VOLKSWAGEN JETTA HYBRID |
Models from 2014
2014 VOLKSWAGEN JETTA HYBRID |
Models from 2013
2013 VOLKSWAGEN JETTA HYBRID |
Tech Tips Date: May 1, 2015 TT 93-15-01 Ensure Proper Torque Specifications when Installing High Voltage Cables on Jetta Hybrid When replacing or reinstalling High Voltage cables into the Electric Drive Power and Control Electronics JX1, insure proper torque specification of 20 Nm is used. Too much torque can cause damage to the mounting tabs within the JX1 requiring replacement of the unit. Tightening Specifications, High Voltage Contacts High voltage contacts -arrows-: 20 Nm Threaded connection -2 and 3-: 5 Nm Page 1 of 1 ver1.2 © 2015 Volkswagen Group of America, Inc. All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.