V011519 2041328
Service Bulletin Details
Public Details for: V011519 2041328
Technical bulletin: improved diagnostic strategy for better diagnosis by updating software
- 2015 -
Models from 2015
2015 VOLKSWAGEN BEETLE |
2015 VOLKSWAGEN BEETLE CONVERTIBLE |
2015 VOLKSWAGEN GOLF |
2015 VOLKSWAGEN GOLF SPORTSWAGEN |
2015 VOLKSWAGEN JETTA |
Technical Bulletin Model Year Eng. Code Trans. Code VIN Range From VIN Range To Jetta 2015 2.0L TDI All All All All All All All All All All All All (CVCA) Beetle / Beetle Conv. 2015 Golf 2015 2.0L TDI (CVCA) 2.0L TDI (CRUA) Golf Sportwagen 2015 2.0L TDI (CRUA) Condition 01 15 19 July 21, 2015 2041328 Update Programming MIL ON, DTC P208D Stored in ECM Fault Memory DTC P208D Description Reductant Pump "A" Control Circuit High Technical Background Improved diagnostic strategy. Production Solution Implemented into production. Page 1 of 7 Plus attachment .© 2015 Volkswagen Group of America, Inc. All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. Technical Bulletin Service Update-Programming Procedure: Tip: To Update-Programming using SVM, review and follow instructions in Technical Bulletin Instance 2014603 “Software Version Management”. The SVM Process must be completed in its entirety so the database receives the update confirmation response. A warranty claim may not be reimbursed if there is no confirmation response to support the claim. Note: Prior to launching the ODIS service diagnostic applications and starting control module update process, confirm tester screen saver and power settings in accordance with Special Tools and Equipment - Service Information Circular # VVT-12-02. Failure to do so may result in the tester entering power save mode during data transfer, and subsequent control module failure. When using a VAS 6150/X or 6160/X tester in conjunction with a VAS 5054A wireless transmitter head for a flash procedure, please connect a USB cable between the transmitter head and the tester. Failure to do so may lead to errors during the flash procedure. VAS tools must only be used with their power adapters plugged in. Under no circumstances should they be used on battery power alone during the programming procedure. Critical Warning: The Midtronics Battery Charger must be connected to the vehicle battery for the duration of the programming, to ensure the battery state of charge remains above 12.5 volts during the update process. If the battery drops below 12.5 volts, the programming could fail which may result in damage to the control module. Control modules damaged by inadequate voltage will not be covered under the warranty policy. The technician should verify the vehicle voltage prior to starting the update process, and should monitor the voltage for the duration of the update. WARNING: Radiator Fan(s) may cycle ON high speed during the Update Process! There is a risk that personal injury may result if contact is made with spinning fan blades. Keep hands and all objects away from Radiator Fan(s) during Update Process! Page 2 of 7 Plus attachment .© 2015 Volkswagen Group of America, Inc. All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. Technical Bulletin Update the Engine Control Module using the SVM Unit code as listed in the table below: Model Engine/ Trans. Old Software Part No. Old Software Version New Software Part No. New Software Version SVM Unit Code Jetta CVCA 04L906016AJ 6833 04L906016AJ 8518 3B57 04L906016AK 8521 3B57 04L906016AG 8516 3B57 with Manual (02Q) 7678 7767 7973 8086 8148 8273 8418 Jetta CVCA 04L906016AK with DSG (02E) 6834 7679 7768 7974 8087 8149 8227 8276 8419 Beetle / Beetle Conv. CVCA 04L906016AG with Manual (02Q) 6831 6893 6981 7178 7522 7577 7969 8082 Page 3 of 7 Plus attachment .© 2015 Volkswagen Group of America, Inc. All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. Technical Bulletin 8144 8271 8414 Beetle / Beetle Conv. CVCA 04L906016AH with DSG (02E) 6832 04L906016AH 8519 3B57 04L906021C 8514 3B57 04L906021D 8515 3B57 6895 6982 7179 7521 7576 7970 8083 8145 8274 8415 Golf / Golf Sportwagen CRUA 04L906021C with Manual (02Q) 6752 6886 7059 7519 7967 8080 8142 8277 8412 Golf / Golf Sportwagen CRUA 04L906021D with DSG (02E) 6853 6887 6983 7058 7520 7968 8081 Page 4 of 7 Plus attachment .© 2015 Volkswagen Group of America, Inc. All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. Technical Bulletin 8143 8278 8413 The procedure can be found in GFF under Functions/ Component Selection, Software Version Management, Adapting Software. Tip: The SVM Process must be completed in its entirety so the database receives the update confirmation response. A warranty claim may not be reimbursed if there is no confirmation response to support the claim or action is carried out that is not explicitly stated in the Technical Bulletin. Ensure attached ECM/TCM Tuning Form has been completed and signed by customer as required in SVM Technical Bulletin Instance 2014603. Page 5 of 7 Plus attachment .© 2015 Volkswagen Group of America, Inc. All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. Technical Bulletin Warranty To determine if this procedure is covered under Warranty, always refer to the Warranty Policies and Procedures Manual 1) Model(s) Year(s) Eng. Code(s) Trans. Code(s) VIN Range From VIN Range To Jetta 2015 2.0L TDI All All All All All All All All All All All All (CVCA) Beetle / Beetle Conv. 2015 Golf 2015 2.0L TDI (CVCA) 2.0L TDI (CRUA) Golf Sportwagen 2015 2.0L TDI (CRUA) SAGA Coding Claim Type: Use applicable Claim Type 1) Damage Service Number: HST Damage Location (Depends on Service No.) -- Use applicable when indicated in Elsa (L/R) Code 2360 Parts Manufacturer: 0039 Jetta, Beetle, Beetle Conv., Golf, Golf Sportwagen Labor Operation 3) : Charge Battery 27068950 = 10 TU Labor Operation 3) : Update Programming See GFF time expenditure Causal Part: 01500000 3ME 2) Diagnostic Time 4) GFF Time expenditure 01500000 = 40 TU max. YES Page 6 of 7 Plus attachment .© 2015 Volkswagen Group of America, Inc. All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. Technical Bulletin Road Test 01210004 = 10 TU YES Technical Diagnosis 01320000 = 00 TU max. NO Claim Comment: Input “As per Technical Bulletin 2041328” in comment section of Warranty Claim. 1) Vehicle may be outside any Warranty in which case this Technical Bulletin is informational only 2) Code per warranty vendor code policy. 3) Labor Time Units (TUs) are subject to change with ELSA updates. 4) Documentation required per Warranty Policies and Procedures Manual. Required Parts and Tools No Special Parts required. Tool Description Tool No: Midtronics Battery Tester/Charger InCharge 940 (INC-940) or GRX3000VAS VAS Diagnostic Tool VAS 6150/X & VAS 6160/X with ODIS Service with current online updates Additional Information All part and service references provided in this Technical Bulletin are subject to change and/or removal. Always check with your Parts Dept. and Repair Manuals for the latest information. Page 7 of 7 Plus attachment .© 2015 Volkswagen Group of America, Inc. All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. OWNER INFORMATION ABOUT CONTROL MODULE TUNING* ACKNOWLEDGEMENT AND AUTHORIZATION FOR REPROGRAMMING (REFLASHING) OF CONTROL MODULE(S) *) “TUNING” is described as the addition of or modification of any component which causes a Volkswagen vehicle to perform outside the normal parameters and specifications approved by Volkswagen Group of America / Volkswagen Group Canada. Date: Dealer Number: Vehicle Identification Number: Repair Order Number: Dealer stamp I , owner or driver of the above identified Volkswagen, confirm: - “Tuning” as described above (especially power increasing modifications) has NOT been performed on my vehicle. - “Tuning” as described above has been performed on my vehicle and the following components were modified or installed: TUNING was performed by (Please provide Company name and telephone number, if you wish us to contact them): I understand that if my Control Module is determined to have been tuned, any damage caused by the tuning of the Control Module (including adverse emissions consequences) will not be covered by VWGoA / VGC warranties. I am permitting an authorized Volkswagen Dealer to reflash (update) my Control Module, and by doing so, I understand that this process will automatically overwrite (destroy) and permanently delete any tuning program that was previously installed on the Control Module of my Volkswagen vehicle. By signing below, I fully acknowledge and understand that the tuning program will not be restored and VWGoA / VGC, will not be liable in any way for the loss of tuning data. Signature of Customer E 2015 Volkswagen Group of America Inc. All rights reserved. Information contained in this document is based on the latest information available at the time of printi ng and is subject to the copyright and other intellectual property rights of VGoA / VGCA Inc., its affiliated companies and its licensors. All rights are reserved to ma ke changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitte d in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or rep osted to other sites, without the prior expressed written permission of the publisher .