V011515 2040171
Service Bulletin Details
Public Details for: V011515 2040171
Technical bulletin (the camshaft adjuster control valve may stick causing camshaft position faults.): this document contains the fault codes needed to diagnose, and service the issue. The document contains the fault codes necessary to check
- 2015 -
Models from 2015
2015 VOLKSWAGEN BEETLE |
2015 VOLKSWAGEN BEETLE CONVERTIBLE |
2015 VOLKSWAGEN GOLF |
2015 VOLKSWAGEN GOLF SPORTWAGEN |
2015 VOLKSWAGEN JETTA |
2015 VOLKSWAGEN PASSAT |
Technical Bulletin Model(s) Year Eng. Code Trans. Code VIN Range From VIN Range To Passat, Jetta, Beetle, Beetle Convertible 2015 2.0L TDI All All All Golf, Golf SportWagen 2015 All All All (CVCA) 2.0L TDI (CRUA) Condition 01 15 15 July 7, 2015 2040171 Supersedes Technical Bulletin V011512 dated May 19, 2015 to update the technical diagnosis answer to yes on the 4th warranty table. MIL ON Camshaft Position Faults P0011 and or P0016 Stored in Fault Memory DTC Description P0011 "A" Camshaft Position - Timing Over-Advanced or System Performance Bank 1 P0016 Crankshaft Position - Camshaft Position Correlation Bank 1 Sensor A Technical Background The camshaft adjuster control valve may stick causing camshaft position faults. Production Solution Measures implemented into production. Page 1 of 8 © 2015 Volkswagen Group of America, Inc. All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. Technical Bulletin Service Tip: To avoid engine damage when working on the valvetrain, both camshafts must be locked in place according to the repair manual, see repair group 15 in Elsa. Scenario 1: Valve timing incorrect If one or more of the above faults are stored in the engine control unit, check the valve timing according to the repair manual, see repair group 15 in Elsa. If the valve timing is incorrect, adjust it according to the repair manual. Scenario 2: Valve timing correct If the valve timing is correct, replace the control valve in the camshaft positioner (N205), Part Number: 03L 906 455, according to the repair manual, see repair group 15 in Elsa. Tip: When changing the control valve, the engine should be held at TDC. Change the engine oil and filter. Page 2 of 8 © 2015 Volkswagen Group of America, Inc. All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. Technical Bulletin Warranty Scenario 1: To determine if this procedure is covered under Warranty, always refer to the Warranty Policies and Procedures Manual 1) Model(s) Year(s) Eng. Code(s) Passat 2015 2.0L TDI Trans. Code(s) VIN Range From VIN Range To All All All (CVCA) SAGA Coding Claim Type: Use applicable Claim Type 1) Damage Service Number: HST Damage Location (Depends on Service No.) -- Use applicable when indicated in Elsa (L/R) Code 1584 0010 Parts Manufacturer Passat WWO 2) Valve Timing Incorrectly Adjusted Labor Operation 3) : Check and adjust valve timing 1502 05 05 = 190 Causal Part: Select labor operation 1502 05 05 Diagnostic Time 4) GFF Time expenditure 01500000 = 30 TU max. YES Road Test 01210004 = 10 TU YES Technical Diagnosis 01320000 = 00 TU max. NO Claim Comment: Input “As per Technical Bulletin 2040171” in comment section of Warranty Claim. 1) Vehicle may be outside any Warranty in which case this Technical Bulletin is informational only Page 3 of 8 © 2015 Volkswagen Group of America, Inc. All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. Technical Bulletin 2) Code per warranty vendor code policy. 3) Labor Time Units (TUs) are subject to change with ELSA updates. 4) Documentation required per Warranty Policies and Procedures Manual. Scenario 2: To determine if this procedure is covered under Warranty, always refer to the Warranty Policies and Procedures Manual 1) Model(s) Year(s) Eng. Code(s) Passat 2015 2.0L TDI Trans. Code(s) VIN Range From VIN Range To All All All (CVCA) SAGA Coding Claim Type: Use applicable Claim Type 1) Damage Service Number: HST Damage Location (Depends on Service No.) -- Use applicable when indicated in Elsa (L/R) Code 1584 0010 Parts Manufacturer Passat WWO 2) Valve Timing Correct Labor Operation 3) : Camshaft adjuster remove+reinstall 1584 19 56 = 90 TU Labor Operation 3) : Control Housing remove+reinstall 1585 19 55 = 20 TU Labor Operation 3) : Air Cleaner remove+reinstall 2325 19 05 = 40 TU Labor Operation 3) : Engine oil and filter replaced 1730 55 99 = 70 TU Causal Part: Camshaft Adjuster Control Valve 03L 906 455 Diagnostic Time 4) Page 4 of 8 © 2015 Volkswagen Group of America, Inc. All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. Technical Bulletin GFF Time expenditure 01500000 = 30 TU max. YES Road Test 01210004 = 10 TU YES Technical Diagnosis 01320000 = 140 TU max. YES Claim Comment: Input “As per Technical Bulletin 2040171” in comment section of Warranty Claim. 1) Vehicle may be outside any Warranty in which case this Technical Bulletin is informational only 2) Code per warranty vendor code policy. 3) Labor Time Units (TUs) are subject to change with ELSA updates. 4) Documentation required per Warranty Policies and Procedures Manual. Scenario 1: To determine if this procedure is covered under Warranty, always refer to the Warranty Policies and Procedures Manual 1) Model(s) Year(s) Eng. Code(s) Jetta, Beetle, Beetle Convertible 2015 2.0L TDI Golf, Golf SportWagen 2015 Trans. Code(s) VIN Range From VIN Range To All All All All All All (CVCA) 2.0L TDI (CRUA) SAGA Coding Claim Type: Use applicable Claim Type 1) Damage Service Number: HST Damage Location (Depends on Service No.) -- Use applicable when indicated in Elsa (L/R) Code 1584 Parts Manufacturer 0010 Golf, Golf SportWagen WWO 2) Jetta, Beetle, Beetle Convertible 3ME 2) Valve Timing Incorrectly Adjusted Page 5 of 8 © 2015 Volkswagen Group of America, Inc. All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. Technical Bulletin Labor Operation 3) : Check and adjust valve timing 1502 05 05 = 190 TU Causal Part: Select labor operation 1502 05 05 Diagnostic Time 4) GFF Time expenditure 01500000 = 30 TU max. YES Road Test 01210004 = 10 TU YES Technical Diagnosis 01320000 = 00 TU max. NO Claim Comment: Input “As per Technical Bulletin 2040171” in comment section of Warranty Claim. 1) Vehicle may be outside any Warranty in which case this Technical Bulletin is informational only 2) Code per warranty vendor code policy. 3) Labor Time Units (TUs) are subject to change with ELSA updates. 4) Documentation required per Warranty Policies and Procedures Manual. Scenario 2: To determine if this procedure is covered under Warranty, always refer to the Warranty Policies and Procedures Manual 1) Model(s) Year(s) Eng. Code(s) Jetta, Beetle, Beetle Convertible 2015 2.0L TDI Golf, Golf SportWagen 2015 Trans. Code(s) VIN Range From VIN Range To All All All All All All (CVCA) 2.0L TDI (CRUA) SAGA Coding Claim Type: Use applicable Claim Type 1) Damage Service Number: HST Damage Location (Depends on Service No.) -- Use applicable when indicated in Elsa (L/R) Code 1584 0010 Page 6 of 8 © 2015 Volkswagen Group of America, Inc. All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. Technical Bulletin Golf, Golf SportWagen WWO 2) Jetta, Beetle, Beetle Convertible 3ME 2) Parts Manufacturer Valve Timing Correct Labor Operation 3) : Camshaft adjuster remove+reinstall 1584 19 56 = 80 TU Labor Operation 3) : Toothed belt cover remove+reinstall 1587 19 05 = 70 TU Labor Operation 3) : Engine oil and filter replaced 1730 55 99 = 50 TU Causal Part: Camshaft Adjuster Control Valve 03L 906 455 Diagnostic Time 4) GFF Time expenditure 01500000 = 30 TU max. YES Road Test 01210004 = 10 TU YES Technical Diagnosis 01320000 = 140 TU max. YES Claim Comment: Input “As per Technical Bulletin 2040171” in comment section of Warranty Claim. 1) Vehicle may be outside any Warranty in which case this Technical Bulletin is informational only 2) Code per warranty vendor code policy. 3) Labor Time Units (TUs) are subject to change with ELSA updates. 4) Documentation required per Warranty Policies and Procedures Manual. Page 7 of 8 © 2015 Volkswagen Group of America, Inc. All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. Technical Bulletin Required Parts and Tools Part No: Part Description Quantity 03L906455 Camshaft Adjuster Control Valve 1 Tool Description Tool No: Midtronics Battery Tester/Charger InCharge 940 (INC-940) or GRX3000VAS VAS Diagnostic Tool VAS 6150/X & VAS 6160/X with ODIS Service with: current online updates Additional Information All part and service references provided in this Technical Bulletin are subject to change and/or removal. Always check with your Parts Dept. and Repair Manuals for the latest information. Page 8 of 8 © 2015 Volkswagen Group of America, Inc. All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.