TT 87-11-01
Service Bulletin Details
Public Details for: TT 87-11-01
Tech tips (a/c control module basic settings): this document gives the procedure to diagnoise the basic settings of the a/c control module.
- 2015 - 2014 - 2013 - 2012 - 2011 -
Models from 2015
2015 VOLKSWAGEN JETTA |
Models from 2014
2014 VOLKSWAGEN BEETLE |
2014 VOLKSWAGEN JETTA |
Models from 2013
2013 VOLKSWAGEN BEETLE |
2013 VOLKSWAGEN JETTA |
Models from 2012
2012 VOLKSWAGEN BEETLE |
2012 VOLKSWAGEN JETTA |
Models from 2011
2011 VOLKSWAGEN JETTA |
Tech Tips Date: March 18, 2011 TT 87-11-01 2011-2015 Jetta, 2012-2014 Beetle – A/C Control Module Basic Settings July 31, 2015: Update to model year applicability. After A/C control module J301 is replaced, fault 00898-005 “Activation A/C Compressor No or Incorrect Basic Settings” may be stored. GFF test plan does not perform Activation A/C Compressor Basic Setting. To perform basic setting and resolve this fault, follow steps below: Set the blower on position 1 or 2 Set Airflow direction to “vent” Set Temperature to “full cold” Start the engine Press and hold the defrost and a/c buttons at the same time Hold the buttons for 5-7 seconds until the defrost, A/C, and recirc buttons are illuminated Restart the vehicle and recheck all functions before returning the vehicle to the customer Page 1 of 1 ver1.2 © 2015 Volkswagen Group of America, Inc. All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.