PDI - 2013 A8 A8
Service Bulletin Details
Public Details for: PDI - 2013 A8 A8
This document contains the audi pre-delivery checklist.
- 2013 -
Models from 2013
2013 AUDI A8 |
2013 AUDI S8 |
PERFECT DELIVERY INSPECTION (PDI) 2013 A8/A8 L/A8 W12/S8 Client Audi Delivery Guidelines VIN Delivery Date Pre-Delivery Ensure Final Vehicle Quality Inspection Is Completed FF Enroll customer in Audi connect Services (http://MyAudiconnect.com/)(if equipped and Audi connect Request to Initiate Services and T-Mobile T&C are signed) FF Deactivate the connection prompts for the online services (TEL function button > Settings > Connections > Data Connection > select Always) FF Inspect exterior for damage, dings, dents and surface scratches FF Check interior for cleanliness, grease marks and damage. Repair all defects prior to customer delivery FF Verify vehicle is equipped as specified and all accessories are installed FF Check front/rear floor mats are locked in Customer Priority Topics 1.____________________________________________________________________________________________________________________________________________________________ 2.____________________________________________________________________________________________________________________________________________________________ 3.____________________________________________________________________________________________________________________________________________________________ How long would the client like to spend on topics today?_______________________________________ Priority Delivery Topics Personalize Vehicle Settings FF Audio and Entertainment System Controls FF Bluetooth: Connect customer’s Bluetooth phone and assist in copying and accessing phonebook entries. Ensure connection will occur automatically upon re-entry if desired. Refer to www.audiusa.com/bluetooth for compatible phone list FF HVAC (Heating, Ventilation, Air Conditioning) Controls FF Adjust mirrors, seats, and steering column to customer preference FF Navigation System FF Assist with radio station presets FF Memory Seats FF Show how to connect iPod/MP3. Demonstrate AMI, SD cards and Aux-in jack (if equipped) Bluetooth Capability FF Pair the customer’s phone with the vehicle FF Demonstrate making a call via Voice and Steering Wheel commands FF Demonstrate how to answer, ignore and end calls FF Conference calling (enable in the MMI under Telephone function button > Settings control button > Call Options) FF Dialing from directories/phonebook (received, missed, dialed calls) FF Explain Advanced Audio Distribution Profile (A2DP) capabilities FF Refer to www.audiusa.com/bluetooth for compatible phone list 1 of 13 PERFECT DELIVERY INSPECTION (PDI) 2013 A8/A8 L/A8 W12/S8 | Audi Delivery Guidelines Client VIN Delivery Date Voice Controls FF Demonstrate the voice command feature (i.e., accessing “Help,” dialing a phone number, calling a contact, using the steering wheel voice command button, etc.) FF Have the customer complete the speech training to allow the Voice Recognition System to learn and adapt to the customer’s voice (Main Menu > Setup MMI > Voice Recognition > Individual Speech Training) FF Radio station, CD/DVD, or Jukebox Introduce MMI Navigation System FF Review the MMI controls and basic functionality (buttons: function, on/off, arrow control, and back) FF MMI touch control panel with integrated handwriting recognition FF Input letters, numbers symbols, add a space, delete a character FF Moving a map and adjusting the sound distribution FF Saving/selecting a radio station FF Scroll through album covers (avail. if music is downloaded onto MMI hard drive) FF Use the DVD main menu FF Demo Audio Sources: Show how to connect iPod via AMI, MP3/SD cards, Bluetooth audio player. Explain the Jukebox functionality FF Explain CD and DVD loading/unloading Audi connect (if equipped) FF Ensure customer has requested activation of Audi connect FF Provide overview of features (activate services before customer arrival) FF Point out that the Audi connect Brochure (located in the glove box) contains additional information for customer review after delivery FF Explain trial period for Audi connect and how to extend service FF Show traffic reports, fuel updates, weather information, real-time news feeds FF Explain Wi-Fi hotspot capabilities FF Have customer set up their Wi-Fi password via Telephone > Settings > Connections > Wireless Network Settings > Select “password.” Ask the customer to enter an easy way to remember the password. Then select “apply settings” to save it. FF Explain the purpose of setting up a myAudi account at my.audiusa.com/Audiconnect Navigation FF Show how to input an address and a POI as the destination using the MMI and voice commands. (Use Online Destinations if equipped with Audi connect) FF Show how to enter a stopover FF Demo how to “cancel” route guidance using voice commands (“Cancel route guidance”) and the MMI (NAV > Destination > Cancel) FF Show how to store a destination FF Show how to customize route “criteria” (e.g., avoid toll roads) and “Settings” (e.g., 3D map and Map Orientation, and Google Earth Mapping [with Audi connect services enabled]) FF Show how to manipulate the map (zoom, scroll map area) 2 of 13 PERFECT DELIVERY INSPECTION (PDI) 2013 A8/A8 L/A8 W12/S8 | Audi Delivery Guidelines Client VIN Delivery Date Navigation (continued) FF Show how to repeat the last navigation announcement using the iNav steering wheel button FF Show how to access TMC reports via Sirius and traffic reports via Audi connect FF Show how to set the power locking options in the MMI FF Show how to set the ambient lighting in the vehicle interior FF Explain Tire Pressure Monitoring System and how to reset in the MMI FF Explain the settings for the Bang & Olufsen® system (if equipped) Media Overview Radio (AM/FM/SAT) FF Show how to program preferred radio stations. Up to 6 presets available on the MMI touch control panel FF Explain the scanning/tuning functions FF Walk the customer through the steps to program favorite radio stations (press and hold knob). The customer should do this with your guidance FF Show the customer the manual seek feature. Select the FM Band > Functions. Turn control knob to Tuning/Channels and press the knob. Cover Art FF Not available on iPod (available if using “R” cable) FF Flash SD media – show how to use SD card, USB via AMI FF Jukebox (Cover Flow available to flip through album covers) Jukebox–Hard drive FF Capacity (20 GB/up to 3,000 songs) FF Format FF Demonstrate importing and sorting Video Capability FF Flash SD/DVD Jukebox FF Video Format Rear Seats (if equipped with the following): FF Rear heated seats FF Rear seat ventilation and massage FF Rear seat lumbar and power adjustments FF Rear seat pass through FF Rear seat entertainment system (RSE) FF Show how to turn the RSE on/off FF Review the RSE controls FF Show how to turn wireless headphones on/off FF Show how to use the control knob joystick function FF Show the location of the RSE DVD drive FF Review video playback information 3 of 13 PERFECT DELIVERY INSPECTION (PDI) 2013 A8/A8 L/A8 W12/S8 | Audi Delivery Guidelines Client VIN Delivery Date Interior FF Show seat, mirrors and steering column adjustments FF Demonstrate seat positioning using front seat controls. Show how to adjust headrest in all different axis directions FF Seat memory setting FF Seat ventilation and massage – Front and rear (if equipped) FF Mention seatbelt movement FF Adjust exterior mirrors. Advise exterior mirrors fold in, make adjustments in the MMI FF Show how to activate heated mirrors FF Explain exterior mirror tilt function FF Demonstrate heated steering wheel operation (if equipped) FF Show integrated foot rest on back of front seats (if equipped) FF Show how to adjust comfort arm rest (longitudinal adjustment) FF Sunroof operation and rear sunshade operation FF Climate control functions (front and rear). Explain “hi”/“lo” settings for faster heating and cooling FF Fan settings/speed FF Explain that the small red triangle puts the system into AUTO mode and that it will automatically adjust the fan speed to reach the temperature FF Show how to activate seat heating/ventilation FF Multifunction steering wheel functions (toggle, scrolling, menu button) FF Explain Star (*) button on the steering wheel (if equipped) – If in the Preset Station List, press the * button to cycle through presets. If in Station List, press * button to cycle through station list FF Wiper/washer system/rain sensor FF Review the Start-Stop-System information card with the customer. Explain the system functionality (if applicable) FF Show how to set daylight savings time and time zone manually FF Driver info display/Trip computer: Explain toggle function via “RESET” on stalk. Show the different tabs that will display FF Show how to access the Vehicle functions within each tab. Point out the items which can be set via the MMI (e.g., time, miles vs. km, etc.). Reset “Trip Comp 1 and 2” prior to delivery FF Demonstrate valet function (ensure not activated) – refer to OM for details FF Homelink® location and setup FF Cooled glove box FF “Passenger Side Airbag Off” light: Illuminates if no occupant in passenger seat or if occupant is “out of position” In Car Video Tutorials FF Show the customer how to view the In Car Video Tutorials. Select the Car function button > Owner’s Man. Control button and follow the prompts FF Point out these videos can also be viewed on the Audi technology website: http://audiusa.com/technology or at the Audi YouTube site at: http://www.youtube.com/audiusa in the Audi Technology Tutorials section 4 of 13 PERFECT DELIVERY INSPECTION (PDI) 2013 A8/A8 L/A8 W12/S8 | Audi Delivery Guidelines Client VIN Delivery Date Exterior FF Show how to open fuel door – push/pull release FF Demonstrate how to operate the power tailgate via the remote control master key, driver’s door, and tailgate Owner’s Documents FF License/insurance/registration/title (if applicable) FF Warranty & Maintenance Booklet (stamp to confirm PDI was completed). Adhere “vehicle identification label” from the vehicle trunk to the inside cover of the Warranty & Maintenance Booklet prior to delivery FF 24-Hour Roadside Assistance information, ask customer to program number in their phone FF Owner’s Manual, MMI Manual and other manuals as equipped FF Quick Reference Guides as appropriate FF Tire Warranty Booklet: Explain coverage from tire manufacturer FF All keys (2 master, 1 emergency, 1 valet) walk customer through programming FF Provide Audi Care Information FF Lemon Law Rights Booklet or Lemon Law Notice as required by law FF Only use oil that meets Audi 502.00 standards FF Advise the customer that Audi recommends using Top Tier Detergent Gasoline with a minimum octane rating of 91AKI (95 RON) FF Review the recommended maintenance schedule. Explain the importance of getting the Warranty & Maintenance Booklet stamped for each maintenance performed Orientation Drive FF Keyless Go: No ignition for key. Show how to start vehicle using Start/Stop button. Discuss that foot must be on brake when starting/stopping FF Activate and demonstrate navigation system with real-time traffic FF Demonstrate operation of Audi parking system plus with rear view camera and top or corner view cameras (if equipped) FF Explain the High Beam Assistant functionality FF Explain Adaptive air suspension functionality FF Explain Audi drive select modes and how to select/change modes FF Night vision assistant: Show where the night vision assistant button is located. Show how to adjust the various settings in the MMI FF Demonstrate the Start-Stop-System (if equipped) FF Explain adaptive cruise control with stop & go function. Explain the city auto e-brake feature FF Explain Audi side assist functionality (if equipped): Point out the side assist button on the driver’s side door. Show how to adjust the side assist light brightness in the MMI. Only works at speeds over 19 mph (30 km/h) FF Explain Audi active lane assist functionality (if equipped): Show how to set the steering wheel vibration in the MMI. Show how to activate the system with the button on the turn signal. Only works at speeds of 40 mph (65 km/h) or more 5 of 13 PERFECT DELIVERY INSPECTION (PDI) 2013 A8/A8 L/A8 W12/S8 | Audi Delivery Guidelines Client VIN Delivery Date Orientation Drive (continued) FF Explain Audi pre sense system with active safety system (based on installed equipment) FF Explain the functionality of Audi braking guard and show how to set in the MMI FF Demonstrate Tiptronic function FF Show how to set the electromechanical parking brake End the orientation drive in the service write-up area Service Introduction FF Tour service department and introduce to Service Manager and Service Consultant FF Set up first service appointment FF Ask customer if you can program service department’s phone # in their phone 6 of 13 PERFECT DELIVERY INSPECTION (PDI) 2013 A8/A8 L/A8 W12/S8 Client Audi Vehicle Condition Report VIN Delivery Date Initial PDI Vehicle Inspection Complete the following checks within 2 business days (48 hours) of receiving a vehicle FF Remove full body cover (if installed) following TSB 2009967. Check for transportation damage. Note: This is a two-person task FF Verify all keys are included (2 master, 1 emergency, 1 valet) FF Verify all wiper blades are enclosed in the trunk (in case transport wipers are installed) FF Inspect painted surfaces/molding/glass (If any defects [scratches/dings/dents/body damage] are found, contact your supervisor to arrange for immediate repair) FF Inspect body for paint defects and damage FF Set tires to maximum recommended tire pressures listed on the B-pillar doorjamb, and store tire pressure values in Car/System menu FF Perform the A-battery test for new batteries in GFF. Scan GFF and select “No” when prompted to run spec/actual. Select “Service work.” Select the battery test for new batteries as part of the pre-delivery inspection and act according to the test result (ok, recharge, replace). Ensure diagnosis log is uploaded to the GFF paperless server by selecting “ok” when tester wants to send the current generated diagnosis protocol online. (Note: Do not use Guided Functions. The diagnosis log will not be uploaded to GFF paperless) 7 of 13 PERFECT DELIVERY INSPECTION (PDI) 2013 A8/A8 L/A8 W12/S8 Client Audi Technician Report VIN Delivery Date All items must be completed prior to customer delivery by an Audi technician **Refer to the Service Work area of GFF for the PDI function tests **Audi recommends using an Audi approved battery charger to prevent excessive battery discharge during inspection Open Campaigns/Updates FF Check ElsaWeb for open campaigns and updates. Perform if applicable Battery Inspection FF Check battery clamps for proper torque. Re-torque if required FF Perform the A-battery test for new batteries in GFF. Scan GFF and select “No” when prompted to run spec/actual. Select “Service work.” Select the battery test for new batteries as part of the pre-delivery inspection and act according to the test result (ok, recharge, replace). Ensure diagnosis log is uploaded to the GFF paperless server by selecting “ok” when tester wants to send the current generated diagnosis protocol online. (Note: Do not use Guided Functions. The diagnosis log will not be uploaded to GFF paperless) Transport Mode Deactivation, DTC check, set service reminder FF Deactivate vehicle transport mode (via Service Work) FF Deactivate Air Suspension loading mode (transport mode) using Guided Fault Finding: Warning! Car body may lower! FF Run an SVM specified/actual comparison. Go to Function Component Selection > SVM FF Set service reminder (via Service Work-17-PDI-resetting SRI at PDI, counter reset, etc.) FF Set Adaptation Channel (via Service Work: 5F–Activating/Deactivating storage of music) (applies to vehicles with an SOP after CW 22) FF Check engine oil level via the MMI – fill oil to the max level when the vehicle is at operating temperature Under the Hood Fluid Check and Inspection FF Check all fluid levels and top off if necessary Trunk Inspection FF Install wheel bolt cover removal tool from PDI kit into trunk lid toolkit FF Place the lug cap removal tool, located in the bypack, into the toolkit (where applicable) FF Set spare tire pressure FF Verify operation of Hands-free trunk release (if equipped) FF Verify operation of trunk emergency release handle 8 of 13 PERFECT DELIVERY INSPECTION (PDI) 2013 A8/A8 L/A8 W12/S8 | Audi Technician Report Client VIN Delivery Date Exterior FF Install permanent wiper blades unless vehicle is for inventory storage *Vehicles with the last 10 digits of the VIN (FD DN022682) or higher produced in Neckarsulm; check installation of permanent wiper blades only FF Test windshield washers for aim and function (if permanent wiper blades are installed) FF Turn on headlights and test headlamp washers FF Test exterior lighting functions FF Check key functionality including seat and steering wheel position memory; verify vehicle starts and runs with all keys and the start/stop button; verify all doors manually and remotely lock/unlock with all keys, including all door handle sensors with the Advanced Key (if equipped) FF Power door closing feature: Check all doors for proper closing (if equipped) Interior FF Check operation of all switches: Locks, windows, seat adjustment, seat ventilation and massage (if equipped), heated seats and child safety features FF Rear view mirror: Check self-dimming function/lighting FF Verify operation of all interior lights, including ambient lighting FF Verify operation of all front and rear seatbelts and latches FF Mirrors: Inspect folding, adjustments, RH tilt in reverse, and memory FF Inspect operation of lighter, aux. outlet under armrest and rear outlet FF Check horn operation FF Check sunroof operation (open/close/vent/deflector at edge) FF Check power rear and rear side sunshade operation (if equipped) FF Turn on the night vision camera and verify operation (if equipped) FF Passenger side airbag: Verify operation of Passenger Occupant Detection System FF Start-Stop-System info (if applicable): Verify the velum sticker is on the start/stop button. Remove the Start-Stop-System information card from the car kit and place it in the glove box with the owner’s manuals. Additional supply can be ordered via the Brand Store on AccessAudi Radio FF Verify operation of CD changer (if equipped) FF Verify operation of DVD player FF Verify operation of AMI FF SD card slot: Insert SD card and test function FF Verify HD Radio is turned “off” in Radio/Settings Menu 9 of 13 PERFECT DELIVERY INSPECTION (PDI) 2013 A8/A8 L/A8 W12/S8 | Audi Technician Report Client VIN Delivery Date Audi MMI/Navigation FF Verify and set Language and Measurement Units in Setup Menu FF Set Time source setting to “GPS” and set Auto daylight savings time to “on.” Change time zone to the appropriate dealer location FF Program the radio presets to local stations FF Navigation: Set dealership location (for following back to dealership during road test) FF Set the “Music volume while parking” to 6 lines (accessed via MMI rear view camera display: Settings > Music volume while parking)(applies to vehicles with park assist or rear view camera) FF Voice Activation: Press the “Talk” button and verify several commands FF Rear Climate Controls: Verify heating and cooling functions (if equipped) FF Rear Seat Entertainment/Rear MMI (if applicable): Verify operation. Verify the wireless headphones are present and pair them to the RSE system (refer to RSE manual). When pairing the headphones, press and hold the on/off button for 4–5 seconds until the light starts flashing quickly Onboard Video Tutorials FF Load Onboard Video Tutorials FF Turn ignition on FF Insert the Onboard DVD into the DVD Drive FF Select the CAR function button. System will initialize FF Select the Owner’s Man. function by selecting the upper right control button FF Select “Yes” FF Select “CD/DVD” FF Select “Start update” FF Turn off ignition to start update (the update will take approx. 5 minutes) FF Once completed, remove the disk and place back into the case for the next vehicle Audi connect FF Verify Audi connect Information Packet is present, including: Audi brochure, T-Mobile brochure, customer SIM card, T-Mobile Terms & Conditions (T&C) FF Connect the dealer demo SIM card to the vehicle and make sure the system fully connects to 2G or 3G (2G or 3G symbol with Box surrounding it)(only applies if in a T-Mobile service area) FF Enable Google Earth in the navigation settings and verify the white Google Logo appears next to the 2G or 3G symbol FF Ensure the wireless network is turned on (Telephone function button > Settings Ctrl button > Connection > Wireless network connection > select “On”) FF Check Wi-Fi hotspot functionality is enabled and verify the SSID is set to “AUDIXXXX,” where XXXX = last four digits of VIN 10 of 13 PERFECT DELIVERY INSPECTION (PDI) 2013 A8/A8 L/A8 W12/S8 | Audi Technician Report Client VIN Delivery Date On-Hoist Inspection FF Inspect wheel bolts for proper torque using torque wrench FF Check underside of vehicle for fluid leaks and loose components FF Check steering, boots, brake system, hoses, tires and wheels for damage FF Install wheel bolt covers from PDI kit on all wheels FF Set tires to maximum recommended tire pressures listed on the B-pillar doorjamb and store tire pressure values in Car/System menu Road Test Inspection FF Check for squeaks, rattles and wind noise FF Verify operation of Audi parking system plus with rear view camera and top or corner view cameras (if equipped) FF Verify engine performance and acceleration FF Verify transmission operation, including shift paddles FF Check Adaptive air suspension in all positions FF Verify engine Start-Stop-System functionality (if equipped) FF Check steering/tire alignment FF Check heated steering wheel operation (if equipped) FF Test drive vehicle applying brakes at least 4 times at 20 mph (35 km/h) to clean brake rotors. Check for abnormal noise/vibration FF Verify quality of radio reception in AM/FM/SAT bands FF Verify cruise control/ACC with Stop & Go functionality (if equipped) FF Verify Audi side assist functionality (if equipped) FF Verify Audi lane assist functionality (if equipped) FF Climate Control: Check heating and cooling functions FF Seat heating: Inspect for proper operation FF Navigation function: Activate NAV and follow directions back to dealership Post-Road Test Inspection FF Interrogate fault memory using the VAS tester and print Diagnostic Log FF Record final mileage on checklist and sign checklist FF Ensure the yellow tire pressure tag is installed on steering wheel If Vehicle is for Showroom Display/Inventory Storage or Demo Use FF Install showroom charger to ensure battery remains charged at all times FF Apply Inventory Maintenance Sticker FF Install permanent wiper blades (if for showroom display or demo use) 11 of 13 PERFECT DELIVERY INSPECTION (PDI) 2013 A8/A8 L/A8 W12/S8 Client Audi Vehicle Detail Report VIN Delivery Date Warning: Do NOT use accessories (radio, etc.) while performing detail, as this can discharge the battery. Refer to TSB 2009967 for Detailer responsibilities, specific use of chemicals, and for part numbers to order materials Exterior – Prior to Delivery FF Remove protective covering FF Wash/Dry vehicle exterior including inside door jambs and under trunk FF Inspect painted surfaces/molding/glass and remove any residue (If any defects [scratches/dings/dents/body damage] are found, contact your supervisor to arrange for immediate repair) FF Inspect body for paint defects and damage FF Check interior floors, sunroof, trunk, front and rear windshield, and all windows for water leaks FF Apply either 3M™ Performance Finish Wax or 3M™ Perfect-It™ Show Car Paste Wax to wax the vehicle FF Clean front and rear windshield using 3MTM Glass Polishing Compound. Refer to TSB 2020552/2 for details FF Apply 3M Performance Finish wax to the wheels (except chrome wheels) to protect rims from brake dust Under Hood – Prior to Delivery FF Wipe down engine compartment and remove excess water from grille and hood area. Important: Do not use dressings or chemicals containing silicone! Interior – Prior to Delivery FF Clean all glass/sunroof (if equipped/interior rear view and visor mirrors) FF Remove all trim protection/coverings/stickers/decals WARNING! Do not remove airbag warning triangle/warning labels FF Check upholstery/clean as required FF Check for excessive grease on seat tracks/clean as required FF Check all interior surfaces/compartments (including sun visors/headliner) for marks or fingerprints. Clean as required FF Vacuum carpet FF Check luggage compartment and vacuum FF Install front/rear floor mats (including locking clip/tabs if applicable)/check that color matches Final Detail Quality Inspection FF Re-inspect vehicle for surface scratches, swirl marks, paint chips, dents, wax residue, dust, or lint, preferably in an area where vehicle is to be delivered. If this is not possible, inspect vehicle in shop under fluorescent lights or in bright sunlight 12 of 13 PERFECT DELIVERY INSPECTION (PDI) 2013 A8/A8 L/A8 W12/S8 | Inspection Verification Client VIN Delivery Date Audi Brand Specialist I certify that all operations have been completed and this vehicle has been prepared in accordance with Audi Procedures and Quality Standards. Audi Brand Specialist Signature Date Porter I certify that all operations have been completed and this vehicle has been prepared in accordance with Audi Procedures and Quality Standards. Porter Signature Date Technician I certify that all operations have been completed and this vehicle has been prepared in accordance with Audi Procedures and Quality Standards. Technician Signature Date Detailer I certify that all operations have been completed and this vehicle has been prepared in accordance with Audi Procedures and Quality Standards. Detailer Signature Date Would you like to schedule a Second Delivery? FF No FF Yes Date Time By signing, I confirm all items in this checklist have been thoroughly reviewed with me and the statements below are true. • Vehicle is clean and free of problems • Received all keys and owner’s documentation • Satisfied with features and controls explanations Customer Signature 06-13-US Date 13 of 13