A011542 2041787-

Service Bulletin Details

Public Details for: A011542 2041787-

Dtcs are stored in the ecm. There may be soot buildup on the moveable elements of the pressure sensing glow plug (psg).


- 2015 - 2014 - 2013 -

Technical Service Bulletin
01 MIL on (DTC P1032 - NOx sensor signal too high)
01 15 42 2041787/1 September 3, 2015.
Model(s)
Year
VIN Range
Vehicle-Specific Equipment
A6, A7, A8,
Q5, Q7
2013 – 2015
All
TDI clean diesel
Condition
The following DTC is stored in the engine control module (ECM), J623 (address word 01):
• DTC P103200 (NOx sensor signal too high)
Technical Background
There may be soot buildup on the moveable elements of the pressure sensing glow plug (PSG).
Production Solution
Improved pressure sensing glow plug for model year 2015.
© 2015 Audi of America, Inc.
Page 1 of 3
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of
Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval
system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior
expressed written permission of the publisher.
Technical Service Bulletin
Service
1. Confirm that DTC P103200 is stored, and follow the GFF test plan.
2. If the GFF test plan does not reach a conclusion, remove the pressure sensing glow plug from cylinder 2.
3. Check the gap between the moveable elements of the pressure sensing glow plug for soot buildup (Figure 1).
Figure 1. Glow plug without soot buildup (left) and with soot buildup (right).
4. If soot buildup is present, replace the pressure sensing glow plug.
© 2015 Audi of America, Inc.
Page 2 of 3
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of
Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval
system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior
expressed written permission of the publisher.
Technical Service Bulletin
Warranty
Claim Type:
Use applicable claim type. If vehicle is outside any warranty, this Technical Service Bulletin
is informational only.
Service Number:
2884
Damage Code:
0016
Labor Operations:
Glow plug remove + reinstall
Diagnostic Time:
GFF – Checking and clearing fault codes included 0150 0000
in existing labor operations
2884 1935
30 TU
Time stated on
diagnostic
protocol
(Max 70 TU)
Road test prior to service procedure
No allowance
0 TU
Road test after service procedure
No allowance
0 TU
Technical diagnosis at dealer’s discretion
(Refer to Section 2.2.1.2 and Audi Warranty Online for DADP allowance details)
Claim Comment:
As per TSB #2041787/1
Required Parts and Tools
Part Number
Part Description
Quantity
059905061E
Glow plug with pressure sensor
1
Additional Information
All parts and service references provided in this TSB (2041787) are subject to change and/or removal. Always
check with your Parts Department and service manuals for the latest information.
© 2015 Audi of America, Inc.
Page 3 of 3
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of
Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval
system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior
expressed written permission of the publisher.


© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.