PDI - 2016 A3 Ca

Service Bulletin Details

Public Details for: PDI - 2016 A3 Ca

This document contains the audi pre-delivery inspection checklist. All items must be completed prior to customer delivery by an audi technician. Audi recommends using an audi approved battery charger to prevent excessive battery discharge d


- 2016 -

2016
A3 Cabriolet
Audi Pre-Delivery Inspection
Stock No.
Dealer Number
R.O. No.
VIN
Road test mileage out
Road test mileage in
Reminders
 All items must be completed prior to customer delivery by an Audi technician
 Audi recommends using an Audi approved battery charger to prevent excessive battery discharge during inspection
 ALL PDI function tests must be run in Guided Fault Finding (GFF) only. Do NOT use Guided Functions for any PDI related test
as these will not be uploaded to the Paperless Server. Refer to the Special functions tab of ODIS Diagnosis for using GFF for PDI
function tests
 For items marked with *, please refer to the PDI Technician Reference Document posted on ServiceNet for additional information
Vehicle Preparation
Interior
 Check Elsa for open campaigns and updates
 Verify operation of all seat belts and latches
 Deactivate vehicle transport mode*
 Check operation of window, lock, and seat controls*
 Set adaption channel to enable CD Ripping (if equipped with
NAV)*
 Verify windows can be operated with the key*
 Set service reminder*
 Perform any open campaigns *
Under the Hood Inspection
 Check battery clamps for proper torque*
 Perform a battery test*
 Check engine oil level*
 Inspect mirrors for proper operation*
 Check rear view mirror operation*
 Verify operation of all interior lights
 Verify operation heated seats (if equipped)
 Verify proper operation of climate control*
 Inspect operation of all power outlets*
 Verify operation of front Passenger Occupant Detection
System
 Check all fluid levels and top off if necessary
Exterior
 Check all key buttons and features*
Lighting and Windshield
 Test exterior lighting functions
 Install wiper blades
 Test front washers (and headlight washers if equipped)*
Settings
 Set Time source setting to “GPS” and set Auto daylight savings time to “on.”*
 Verify and set language and Measurement Units*
 Set “Music volume while parking” to 6 lines*
 Set dealership location in navigation (if equipped)*
 Load Onboard Video Tutorials*
Trunk Inspection
Media / Radio / SAT
 Verify trunk lid is operational
 Verify operation of AMI or aux. input (if equipped)
 Verify operation of emergency release handle
 Verify operation of CD/DVD player (if equipped)
 Install wheel bolt cover removal tool from PDI kit into trunk
tool kit*
 Insert SD card and test function of all slots
 Verify tool kit is installed securely in luggage compartment
 Verify HD Radio is turned “off”*
 Program the presets to local stations
 Set spare tire pressure *1.8T ONLY*
Effective 9-2-2015-US
Version 1.1
PRE-DELIVERY INSPECTION (PDI) | 1
2016
A3 Cabriolet
Audi Pre-Delivery Inspection
Audi connect (USA ONLY) (if equipped)
Driver Assistance
 Verify Audi connect Information Packet is present*
 Verify cruise control/ACC functionality (if equipped)
 Connect the dealer demo SIM card to verify system connects
to mobile network*
 Verify Audi side assist functionality (if equipped)
 Turn on the wireless network*
 Verify Audi active lane assist functionality (if equipped)
 Check Wi-Fi hotspot functionality*
 Activate NAV and follow directions back to dealership (if
equipped)
 Enable Google Earth *
 Verify operation of parking system (if equipped)*
On-Hoist Inspection
Convertible Functionality (if equipped)
 Remove transport suspension blocks (follow ELSA instruction)
 Test operation of power folding top*
 Verify convertible top manual closing tools are present
 Check steering, boots, brake system, hoses, tires and wheels
for damage
 Check underside of vehicle for fluid leaks and loose components
 Inspect wheel bolts for proper torque*
 Install wheel bolt covers and center caps as supplied*
 Set and store tire pressures for either sold vehicle OR stock
inventory vehicle*
Post-Road Test Inspection
 Interrogate fault memory and print Diagnostic Log
 Ensure the yellow tire pressure tag is installed on the steering wheel
 Apply Inventory Maintenance Sticker
 Install showroom charger to ensure battery remains
charged at all times
Driving Performance
 Check horn operation
 Verify hold and release of parking brake
 Verify engine performance and acceleration*
 Verify transmission operation, including shift paddles (if
equipped)
 Test drive vehicle applying brakes several times*
 Check steering/tire alignment
 Check for squeaks, rattles and wind noise
 Verify quality of radio reception in AM/FM/SiriusXM bands
 Calibrate rear view mirror*
Technician
I certify that all operations have been completed and this vehicle has been prepared in accordance with Audi Procedures and
Quality Standards, and has met the standards for Perfect Delivery.
Technician Signature
Effective 9-2-2015-US
Version 1.1
Last 8 of VIN
Completion Date
PRE-DELIVERY INSPECTION (PDI) | 2


© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.