PDI - 2016 A5 Co

2016
A5/S5/RS 5 Coupe
Audi Pre-Delivery Inspection
Stock No.
Dealer Number
R.O. No.
VIN
Road test mileage out
Road test mileage in
Reminders
 All items must be completed prior to customer delivery by an Audi technician
 Audi recommends using an Audi approved battery charger to prevent excessive battery discharge during inspection
 ALL PDI function tests must be run in Guided Fault Finding (GFF) only. Do NOT use Guided Functions for any PDI related test
as these will not be uploaded to the Paperless Server. Refer to the Special functions tab of ODIS Diagnosis for using GFF for PDI
function tests
 It is advised to start ODIS with the engine running to enable all 5F Test Plans in GFF and also to ensure SVM sees all control units
during the SVM check vehicle configuration
 For items marked with *, please refer to the PDI Technician Reference Document posted on ServiceNet for additional information
Vehicle Preparation
Trunk Inspection (continued)
 Check Elsa for open campaigns and updates
 Verify tool kit is installed securely in luggage compartment
 Deactivate vehicle transport mode*
 Set spare tire pressure*
 Set adaption channel to enable CD Ripping (if equipped with
NAV)*
Interior
 Set service reminder*
 Verify operation of all seat belts and latches
 Perform any open campaigns *
 Check operation of window, lock, and seat controls*
 Inspect mirrors for proper operation*
Under the Hood Inspection
 Check battery clamps for proper torque*
 Perform a battery test*
 Check engine oil level*
 Check all fluid levels and top off if necessary
Exterior
 Check all key buttons and features*
Lighting and Windshield
 Test exterior lighting functions
 Check rear view mirror operation*
 Verify operation of all interior lights
 Verify operation heated seats (if equipped)
 Verify proper operation of climate control*
 Inspect operation of all power outlets*
 Check panoramic sunroof operation*
 Verify operation of front Passenger Occupant Detection
System
Settings
 Install wiper blades
 Set Time source setting to “GPS” and set Auto daylight savings time to “on.”*
 Test front washers (and headlight washers if equipped)*
 Verify and set language and Measurement Units*
Trunk Inspection
 Verify trunk lid is operational
 Verify operation of emergency release handle
 Install wheel bolt cover removal tool from PDI kit into trunk
tool kit*
 Verify Voice Activation is operating*
 Set “Music volume while parking” to 6 lines*
 Set dealership location in navigation (if equipped)*
 Load Onboard Video Tutorials*
 Load Onboard Video Tutorials*
 Verify Voice Activation is operating*
Effective 9-2-2015-US
Version 1.1
PRE-DELIVERY INSPECTION (PDI) | 1
2016
A5/S5/RS 5 Coupe
Audi Pre-Delivery Inspection
Media / Radio / SAT
Driving Performance (continued)
 Verify operation of AMI or aux. input (if equipped)
 Test drive vehicle applying brakes several times*
 Verify operation of CD/DVD player (if equipped)
 Check steering/tire alignment
 Insert SD card and test function of all slots
 Check for squeaks, rattles and wind noise
 Program the presets to local stations
 Verify rear spoiler functionality (RS 5 only)
 Verify HD Radio is turned “off”*
 Verify quality of radio reception in AM/FM/SiriusXM bands
 Calibrate rear view mirror*
Audi connect (USA ONLY) (if equipped)
 Verify Audi connect Information Packet is present*
Driver Assistance
 Connect the dealer demo SIM card to verify system connects
to mobile network*
 Verify cruise control/ACC functionality (if equipped)
 Turn on the wireless network*
 Verify Audi side assist functionality (if equipped)
 Check Wi-Fi hotspot functionality*
 Activate NAV and follow directions back to dealership (if
equipped)
 Enable Google Earth *
 Verify operation of parking system (if equipped)*
On-Hoist Inspection
Post-Road Test Inspection
 Remove transport suspension blocks (follow ELSA instruction)
 Interrogate fault memory and print Diagnostic Log
 Check steering, boots, brake system, hoses, tires and wheels
for damage
 Check underside of vehicle for fluid leaks and loose components
 Ensure the yellow tire pressure tag is installed on the steering wheel
 Apply Inventory Maintenance Sticker
 Install showroom charger to ensure battery remains
charged at all times
 Inspect wheel bolts for proper torque*
 Install wheel bolt covers and center caps as supplied*
 Set and store tire pressures for either sold vehicle OR stock
inventory vehicle*
Driving Performance
 Check horn operation
 Verify hold and release of parking brake
 Verify engine performance and acceleration*
 Verify transmission operation, including shift paddles (if
equipped)
Technician
I certify that all operations have been completed and this vehicle has been prepared in accordance with Audi Procedures and
Quality Standards, and has met the standards for Perfect Delivery.
Technician Signature
Effective 9-2-2015-US
Version 1.1
Last 8 of VIN
Completion Date
PRE-DELIVERY INSPECTION (PDI) | 2