PDI - 2016 Q5 TE

2016
Q5/Q5 hybrid/SQ5/Q5 TDI
Audi Pre-Delivery Inspection
Stock No.
Dealer Number
R.O. No.
VIN
Road test mileage out
Road test mileage in
Reminders
 All items must be completed prior to customer delivery by an Audi technician
 Audi recommends using an Audi approved battery charger to prevent excessive battery discharge during inspection
 ALL PDI function tests must be run in Guided Fault Finding (GFF) only. Do NOT use Guided Functions for any PDI related test
as these will not be uploaded to the Paperless Server. Refer to the Special functions tab of ODIS Diagnosis for using GFF for PDI
function tests
 It is advised to start ODIS with the engine running to enable all 5F Test Plans in GFF and also to ensure SVM sees all control units
during the SVM check vehicle configuration
 For items marked with *, please refer to the PDI Technician Reference Document posted on ServiceNet for additional information
Vehicle Preparation
Trunk Inspection (continued)
 Check Elsa for open campaigns and updates
 Install wheel bolt cover removal tool from PDI kit into trunk
tool kit*
 Deactivate vehicle transport mode*
 Set adaption channel to enable CD Ripping (if equipped with
NAV)*
 Set service reminder*
 Perform any open campaigns *
 Verify tool kit is installed securely in luggage compartment
 Verify inflatable spare tire and compressor are present
 Verify operation of luggage cover
Interior
Under the Hood Inspection
 Verify operation of all seat belts and latches
 Check battery clamps for proper torque*
 Check operation of window, lock, and seat controls*
 Perform a battery test*
 Inspect mirrors for proper operation*
 Check engine oil level*
 Check rear view mirror operation*
 Check all fluid levels and top off if necessary
 Verify operation of all interior lights
Exterior
 Check all key buttons and features*
 Prepare the base bars for customer delivery (install bars
only upon customer request)*
Lighting and Windshield
 Test exterior lighting functions
 Install wiper blades
 Test front washers (and headlight washers if equipped)*
Trunk Inspection
 Verify power tailgate is operational and set default opening
height*
Effective 9-2-2015-US
Version 1.1
 Verify operation heated seats (if equipped)
 Verify operation heated/ventilated seats (if equipped)*
 Verify proper operation of climate control*
 Inspect operation of all power outlets*
 Check panoramic sunroof operation*
 Verify operation of front Passenger Occupant Detection
System
Settings
 Set Time source setting to “GPS” and set Auto daylight savings time to “on.”*
 Verify and set language and Measurement Units*
 Verify Voice Activation is operating*
PRE-DELIVERY INSPECTION (PDI) | 1
2016
Q5/Q5 hybrid/SQ5/Q5 TDI
Audi Pre-Delivery Inspection
Settings (continued)
Driving Performance
 Set “Music volume while parking” to 6 lines*
 Check horn operation
 Set dealership location in navigation (if equipped)*
 Verify hold and release of parking brake
 Load Onboard Video Tutorials*
 Verify engine Start-Stop System functionality (if equipped)*
 Verify engine performance and acceleration*
Media / Radio / SAT
 Verify operation of AMI or aux. input (if equipped)
 Verify transmission operation, including shift paddles (if
equipped)
 Verify operation of CD/DVD player (if equipped)
 Test drive vehicle applying brakes several times*
 Insert SD card and test function of all slots
 Check steering/tire alignment
 Program the presets to local stations
 Check for squeaks, rattles and wind noise
 Verify HD Radio is turned “off”*
 Verify quality of radio reception in AM/FM/SiriusXM bands
 Calibrate rear view mirror*
Audi connect (USA ONLY) (if equipped)
 Verify Audi connect Information Packet is present*
Driver Assistance
 Connect the dealer demo SIM card to verify system connects
to mobile network*
 Verify cruise control/ACC functionality (if equipped)
 Turn on the wireless network*
 Verify Audi side assist functionality (if equipped)
 Check Wi-Fi hotspot functionality*
 Activate NAV and follow directions back to dealership (if
equipped)
 Enable Google Earth *
 Verify operation of parking system (if equipped)*
On-Hoist Inspection
Hybrid Technology (Q5 Hybrid only)
 Remove transport suspension blocks (follow ELSA instruction)
 Verify EV button is operating*
 Check steering, boots, brake system, hoses, tires and wheels
for damage
 Check MMI and instrument cluster for proper operation
mode indication *
 Check underside of vehicle for fluid leaks and loose components
Post-Road Test Inspection
 Inspect wheel bolts for proper torque*
 Interrogate fault memory and print Diagnostic Log
 Install wheel bolt covers and center caps as supplied*
 Ensure the yellow tire pressure tag is installed on the steering wheel
 Set and store tire pressures for either sold vehicle OR stock
inventory vehicle*
 Verify charging while braking in recuperation range*
 Apply Inventory Maintenance Sticker
 Install showroom charger to ensure battery remains
charged at all times
Technician
I certify that all operations have been completed and this vehicle has been prepared in accordance with Audi Procedures and
Quality Standards, and has met the standards for Perfect Delivery.
Technician Signature
Effective 9-2-2015-US
Version 1.1
Last 8 of VIN
Completion Date
PRE-DELIVERY INSPECTION (PDI) | 2