A371302 2029027-

Technical Service Bulletin
37 Transmission warning message in cluster (DTC P060A00)
37 13 02 2029027/7 April 26, 2013. Supersedes Technical Service Bulletin Group 37 number 13-99 dated April 1,
2013 for reasons listed below.
Model(s)
Year
VIN Range
Vehicle-Specific Equipment
A4,A5, A5
Cabriolet
2011-2013
All
8 speed 0BK Transmission
Q5 2.0T
2011-2013
All
8 speed 0BK Transmission
A6/A7
2013
All
8 speed 0BK Transmission
A8, A8L,
A8W12, S8
2011-2013
All
8 speed 0BK Transmission
Condition
REVISION HISTORY
Revision
Date
Purpose
7
-
Revised Service (Updated SVM table, ECM update added for A8 4.0T and
S8)
Revised Warranty (reflected changes in Service section)
6
4/1/2013
Revised Service (Updated SVM table)
5
12/19/2012
Revised Service (Updated SVM table)
4
9/27/2012
Revised Header data
3
7/11/2012
Revised Service (Updated SVM table)
2
6/28/2012
Revised Service (Changed wording)
1
3/15/2012
Original publication
• Customer may report transmission warning light is illuminated. In some cases, the vehicle will not move after
being started and placed into gear. After key cycle, the vehicle drives without restriction.
• One of the following DTCs is stored in the transmission control module (TCM), J217 (02):
• DTC P060A00 (Internal Control Module Monitoring Processor Performance) with DFCC 8692
• DTC P060A00 (Internal Control Module Monitoring Processor Performance) with DFCC 8694
• DTC P060A00 (Internal Control Module Monitoring Processor Performance) with DFCC 12480
Tip: If DFCCs do not match exactly, this TSB does not apply.
© 2013 Audi of America, Inc.
Page 1 of 5
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of
Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval
system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior
expressed written permission of the publisher.
Technical Service Bulletin
Technical Background
The DTCs are stored due to an issue with the transmission control module software. Specific DFCCs are stored
as a result of the following situations:
• DTC P060A00 with DFCC 8692 can be logged when a driving mode (Drive or Reverse) is selected within one
second of selecting Neutral, while the vehicle rolls at a speed less than 2 mph (such as when the vehicle is
being maneuvered in or out of a parking spot).
• DTC P060A00 with DFCC 8694 can be logged when the gear is quickly changed from Park to Neutral, due to a
low diagnosis threshold.
• DTC P060A00 with DFCC 12480 can be logged when the gear is changed using the Tiptronic function, due to
a low diagnosis threshold.
Production Solution
• New software in the Transmission Control Module (TCM), J217 (02), addressed the condition.
• For the A8 4.0T and S8 models, there is new software in Engine Control Module (ECM), J623 (01) that should
be used in combination with new software in the Transmission Control Module, J217 (02), which addresses the
condition.
Service
1. Ensure that the
DFCCs match exactly
before proceeding.
The DFCC is the 4-6
digit code in front of
the P code, as
pictured (Figure 1).
Figure 1. Locating the 4-6 digit DFCC code.
© 2013 Audi of America, Inc.
Page 2 of 5
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of
Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval
system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior
expressed written permission of the publisher.
Technical Service Bulletin
2. Update the software using the SVM Update Instructions below.
SVM Update Instructions
1. Follow all instructions in the attached TSB, 2011732 00 Software Version Management (SVM), operating
instructions.
2. Update the TCM using the SVM action code as listed in the table below if necessary.
3. For A8 4.0T and S8 vehicles, update the ECM and the TCM, if necessary. The update may have already been
performed in TSB 2033726.
Model
Engine and/or
Transmission
Old Software Part
Number
Old
Software
Version
New Software Part New
Number
Software
Version
SVM
Action
Code
(or higher)
Transmission Software Update (except A8 4.0T and S8)
A4, A5, A5
Cabriolet
2.0L with 8
speed
Transmission
A4, A5, A5
Cabriolet
2.0L with 8
speed
Transmission
Q5
2.0L with 8
speed
Transmission
Q5
Q5
8K0927158K
All
8K0927158K
1014
02A048
All
8K0927158S
1007
02A048
8R0927158E
All
8R0927158E
1015
02A048
2.0L with 8
speed
Transmission
8R0927158T
All
8R0927158T
1009
02A055
2.0L with 8
speed
Transmission
8R0927158M
All
8R0927158M
1008
02A048
All
4G0927158P
1006
02A055
4H1927158M
1007
4H1927158N
1007
4H1927158AD
4H1927158AD
1007
4H1927158AQ
4H1927158AQ
1004
8K0927158Q or
8K0927158S
4G0927158E or
4G0927158P
A6, A7
A8, A8L
3.0L with 8
speed
transmission
4.2L with 8
speed
transmission
© 2013 Audi of America, Inc.
4H1927158M
4H1927158N
All
02A041
Page 3 of 5
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of
Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval
system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior
expressed written permission of the publisher.
Technical Service Bulletin
A8L
6.3 W12 with 8
speed
transmission
4H1927158T
All
4H1927158T
1009
02A055
A8 4.0T and S8 Transmission and Engine Software Update
Model
Engine and/or
Transmission
Old Software Part
Number
Old
Software
Version
New Software Part New
Number
Software
Version
SVM
Action
Code
(or higher)
A8, A8L
S8
4.0T CEUA
4H0906014B
0002
4H0906014B
0003
8 speed
transmission
and Sport Diff
4H1927158CA
All
4H1927158CA
1005
8 speed
transmission
4H1927158BK
All
4H1927158BK
1005
4.0T CGTA
4H0907557B
0003
4H0907557B
0004
8 speed
transmission
44H1927158BL
All
4H1927158BL
1005
01A134
4. Clear adaptations and perform test drive adaptation through GFF for 2011 model year.
5. Clear adaptations and perform standstill adaptation for 2012 or 2013 model year.
© 2013 Audi of America, Inc.
Page 4 of 5
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of
Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval
system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior
expressed written permission of the publisher.
Technical Service Bulletin
Warranty
Claim Type:
Use applicable claim type. If vehicle is outside any warranty, this Technical Service Bulletin
is informational only.
Service Number:
3730
Damage Code:
0039
Labor Operations:
Update TCM Software
Update ECM and TCM Software
(A8 4.0T/S8 only)
Perform standstill adaptation
3730 2599
40 TU
2470 2599
60 TU
3735 5799
60 TU
-ORPerform test drive adaptation
Included in GFF below
Diagnostic Time:
GFF to perform test drive adaptation
0150 0000
Time stated on
diagnostic
protocol (Max 100
TU)
Road test prior to service procedure
No allowance
0 TU
Road test after service procedure 2012 only.
0121 0004
10 TU
Included in adaptation drive for 2011.
Technical diagnosis at dealer’s discretion
(Refer to Section 2.2.1.2 and Audi Warranty Online for DADP allowance details)
Claim Comment:
As per TSB #2029027/7
All warranty claims submitted for payment must be in accordance with the Audi Warranty Policies and Procedures
Manual. Claims are subject to review or audit by Audi Warranty.
Additional Information
The following Technical Service Bulletin will be necessary to complete this procedure:
• TSB 2011732 00 Software Version Management (SVM), operating instructions.
All parts and service references provided in this TSB are subject to change and/or removal. Always check with
your Parts Department and service manuals for the latest information.
© 2013 Audi of America, Inc.
Page 5 of 5
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of
Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval
system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior
expressed written permission of the publisher.