A571392 2022032-

Technical Service Bulletin
57 Vehicle locking system, diagnostic information
57 13 92 2022032/4 August 1, 2013. Supersedes Technical Service Bulletin Group 57 number 11-49 dated August
8, 2011 for reasons listed below.
Model(s)
Year
A3
2010 – 2013
A4
2009 – 2015
A5
2008 – 2015
A5 Cabriolet
2010 – 2015
A6
2005 – 2015
A7
2012 – 2015
Q5
2009 – 2015
Q7
2007 – 2015
TT
2010 – 2015
R8
2010 – 2015
VIN Range
Vehicle-Specific Equipment
All
Not Applicable
Condition
REVISION HISTORY
Revision
Date
Purpose
4
-
Revised header data (Added R8 model and model years)
Revised Service (Added R8 model)
3
8/8/2011
Revised header data and Service with new models (A3, TT, A7, A8) and model
year (MY12) information
2
5/10/2010
Revised header data (Controlling TSB display in ElsaWeb)
1
11/20/2009
Original publication
The customer inquires about the operation of the vehicle locking, and may suggest that the vehicle “locked itself”.
Technical Background
The lock command history is stored in the convenience system control module (J393).
© 2013 Audi of America, Inc.
Page 1 of 4
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of
Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval
system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior
expressed written permission of the publisher.
Technical Service Bulletin
Production Solution
Not applicable.
Service
The previous central locking system commands can be determined from the following measured value blocks in
the convenience system control module:
A3, TT, R8:
• The last ten operating commands of the central locking system are stored in measuring value blocks 101 – 110
of address word 09. The value in field 1 determines the source and commanded action as listed below:
0 = unknown
1 = driver door lock cylinder
2 = passenger door lock cylinder
3 = trunk lid lock cylinder
4 = remote control key
5 = remote control key trunk lid function
6 = driver door keyless entry
7 = passenger door keyless entry
8 = left rear keyless entry
9 = right rear keyless entry
10 = trunk lid keyless entry
11 = driver door inside button
12 = passenger door inside button
13 = left rear inside button
14 = right rear inside button
15 = remote/keyless entry relock
16 = terminal 15 on
17 = crash
18 = auto lock
19 = auto unlock
20 = airbag signal failure
Tip: For A3, TT and R8 models the measuring value blocks are only available from MY 2010.
© 2013 Audi of America, Inc.
Page 2 of 4
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of
Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval
system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior
expressed written permission of the publisher.
Technical Service Bulletin
A4 (8K), A5, Q5, A6 (4G), A7, A8 (4H):
• The last five operating commands of the central locking system are stored in measuring value blocks 50 – 54
of address word 46. The value in field 1 determines the source and commanded action as listed below:
0 = unknown
1 = driver door lock cylinder
2 = passenger door lock cylinder
3 = trunk lid lock cylinder
4 = remote control key
5 = remote control key trunk lid function
6 = driver door keyless entry
7 = passenger door keyless entry
8 = left rear keyless entry
9 = right rear keyless entry
10 = trunk lid keyless entry
11 = driver door inside button
12 = passenger door inside button
13 = left rear inside button
14 = right rear inside button
15 = remote/keyless entry relock
16 = terminal 15 on
17 = crash
18 = auto lock
19 = auto unlock
20 = airbag signal failure
• The date corresponding to the operating commands of the central locking are stored in measuring value blocks
55 – 59.
A6 (4F), Q7:
• The last locking command of the central locking system is stored in measuring value block 17 of address word
46. The value in field 1 determines the source of the lock command as listed below:
0 = vehicle has not yet been locked
1 = remote lock
2 = remote control closed
3 = keyless entry lock
4 = driver door key switch
5 = driver door locking button
6 = passenger door locking button
7 = left rear door locking button
8 = right rear door locking button
9 = auto lock
10 = relocking after a certain time
11 = locking via diagnostic output test
Tip: On the A6 and Audi Q7, only the very last operating command of the vehicle locking can be read. Auto
lock overwrites this value.
© 2013 Audi of America, Inc.
Page 3 of 4
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of
Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval
system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior
expressed written permission of the publisher.
Technical Service Bulletin
Warranty
This TSB is informational only and not applicable to any Audi warranty.
Additional Information
All parts and service references provided in this TSB (2022032) are subject to change and/or removal. Always
check with your Parts Department and service manuals for the latest information.
© 2013 Audi of America, Inc.
Page 4 of 4
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of
Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval
system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior
expressed written permission of the publisher.