PIT4844G

Service Bulletin Details

Public Details for: PIT4844G

This preliminary information communication provides information to the technician with the installation of cruise control on a vehicle which did not come equipped with the option. Technician will need to contact the techline customer suppor


- 2018 - 2017 - 2016 - 2015 - 2014 - 2013 - 2012 - 2011 - 2010 - 2009 - 2008 - 2007 -

Bulletin No.: PIT4844G
Published date: 12/18/2017
Preliminary Information
PIT4844G Adding Cruise Control (RPO K34)
Models
Brand:
Model:
Model Years:
VIN:
from
Engine:
to
Transmissions:
Chevrolet
Silverado 1500
2007 - 2013
All
All
All
All
GMC
Sierra 1500
2007 - 2013
All
All
All
All
Chevrolet
Silverado 2500/3500
2007 - 2014
All
All
All
All
GMC
Sierra 2500/3500
2007 - 2014
All
All
All
All
Chevrolet
Express
2007 - 2018
All
All
All
All
GMC
Savana
2007 - 2018
All
All
All
All
Supersession Statement
This PI was superseded to add model years. Please discard PIT4844F.
The following diagnosis might be helpful if the vehicle exhibits the symptom(s) described in this PI.
Condition / Concern
Some customers may request the installation of Cruise Control on a vehicle which did not come equipped with the option.
General Motors requests that dealers locate a vehicle equipped with the customers requested options, which would include cruise
control.
Recommendations / Instructions
Please contact the Techline Customer Support Center (TCSC) at 1-800-828-6860
English or 1-800-503- 3222 French to determine if
a calibration is available for the vehicle. If a calibration or VCI is available, follow the instructions below:
Obtain and install the following parts that are intended for a vehicle equipped with RPO K34.
1. Steering Wheel with Cruise Control Buttons
2. Steering Wheel SIR Coil
3. Steering Column Wiring Harness
4. Calibration or VCI number from Techline Customer Support
Note: The Dealer will need to Fax a copy of the Repair Order that includes the Part Numbers of the Steering Wheel with buttons, SIR
Coil, and Steering Column Harness that were installed to Techline before calling to obtain the VCI Number.
NOTE: As this is a customer pay request, there will be a $50.00 charge to the dealer.
Note: It is up to the dealer to identify the appropriate part numbers needed to complete this add on option using the Electronic Parts
Catalog (EPC). Be sure to turn off all filters when searching EPC and identify the following items above that include RPO K34.
Note: DO NOT call Partech for parts assistance for this request.
Warranty Information
This installation procedure is to be performed at the customer's request and at their expense.
It is not a warranty repair and a claim should not be submitted for reimbursement.
Please follow this diagnostic or repair process thoroughly and complete each step. If the condition exhibited is resolved
without completing every step, the remaining steps do not need to be performed.
© 2016 General Motors. All Rights Reserved.


© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.