MY 2018 TT-TTS-T

2018
TT Coupe & Roadster/TTS/TT RS
Audi Pre-Delivery Inspection
Stock No.
Dealer Number
R.O. No.
VIN
Road test mileage out
Road test mileage in
Reminders
 All items must be completed prior to customer delivery by an Audi technician
 Audi recommends using an Audi approved battery charger to prevent excessive battery discharge during inspection
 ALL PDI function tests must be run in Guided Fault Finding (GFF) only. Do NOT use Guided Functions for any PDI related test
as these will not be uploaded to the Paperless Server. Refer to the Special functions tab of ODIS Diagnosis for using GFF for PDI
function tests
 It is advised to start ODIS with the engine running to enable all 5F Test Plans in GFF and also to ensure SVM sees all control units
during the SVM check vehicle configuration
 For items marked with *, please refer to the PDI Technician Reference Document posted on ServiceNet for additional information
 For items marked with **, follow instructions for stock inventory vehicle
Vehicle Preparation
Trunk Inspection (continued)
 Check Elsa for open campaigns and updates
 Set spare tire pressure*
 Deactivate vehicle transport mode*
This step must be performed with the engine off, and ignition on
 Check battery clamps for proper torque*
 Set adaption channel to enable CD Ripping (if equipped with
NAV)*
 Verify operation of all seat belts and latches
 Set service reminder*
 Perform any open campaigns*
Interior
 Check operation of window, lock, and seat controls*
 Inspect mirrors for proper operation*
 Check rear view mirror operation*
Exterior
 Verify operation of all interior lights
 Check all key buttons and features*
 Verify operation heated/ventilated seats
 Inspect exterior for damage, dings, dents and surface
scratches
 Verify proper operation of climate control*
Lighting and Windshield
 Inspect operation of all power outlets*
 Verify operation of front Passenger Occupant Detection
System
 Test exterior lighting functions
 Test windshield washers
Settings
 Verify operation of MMI® touch pad (if equipped)
Trunk Inspection
 Verify trunk is operational
 Set Time source setting to “GPS” and set Auto daylight savings time to “on”*
 Verify operation of emergency release handle
 Set Time to “Automatic setting” and “Automatic time zone”
 Install wheel bolt cover removal tool from PDI kit into trunk
tool kit*
 Verify and set language and measurement units*
 Verify tool kit is installed securely in luggage compartment
 Set “Entertain. Fad.” in Parking aid to an audible level*
 Verify inflatable repair kit and compressor are present (TT
RS only)
 Set “Music volume while parking” to 6 lines*
Effective 6-20-2017-US
Version 1.1
 Verify Speech Dialog System is operating*
 Set dealership location in navigation (if equipped)*
PRE-DELIVERY INSPECTION (PDI) | 1
2018
TT Coupe & Roadster/TTS/TT RS
Audi Pre-Delivery Inspection
Settings (continued)
Driving Performance (continued)
 Turn off Manual Speed Warning (if equipped)*
 Verify engine performance and acceleration*
Media / Radio / SAT
 Verify transmission operation, including shift paddles (if
equipped)
 Verify operation of AMI or aux. input (if equipped)
 Test drive vehicle applying brakes several times*
 Verify operation of CD/DVD player
 Verify rear spoiler functionality (if equipped)
 Insert SD card and test function of all slots
 Check steering/tire alignment
 Verify HD Radio is turned “off”*
 Check for squeaks, rattles and wind noise
 Verify quality of radio reception in AM/FM/SiriusXM® bands
Audi connect® (USA ONLY) (if equipped)
 Verify Audi connect® Information Packet is present (if
equipped)*
Driver Assistance
 Verify cruise control
 Check LTE connection is possible (if vehicle is marked retail
sold in DMS, data is only available after customer starts
6-month trial in www.myaudiconnect.com)
 Verify Audi side assist functionality (if equipped)
 Verify operation of parking system*
 Turn on the Wi-Fi® hotspot (if equipped)*
 Activate NAV and follow directions back to dealership (if
equipped)
 Check Wi-Fi® hotspot visibility No data available at PDI (if
equipped)*
Convertible Functionality (if equipped)
 Enable Google EarthTM (if equipped)*
 Test operation of power folding top*
On-Hoist Inspection
 Verify convertible top manual closing tools are present
 Remove transport suspension blocks (follow ELSA instruction)
Post-Road Test Inspection
 Check steering, boots, brake system, hoses, tires and wheels
for damage
 Interrogate fault memory and upload Diagnostic Log to GFF
Paperless Server
 Check underside of vehicle for fluid leaks and loose components
 Perform a battery test*
 Inspect wheel bolts for proper torque*
 Check engine oil level*
 Install wheel locks (if equipped)
 Check all fluid levels and top off if necessary
 Install wheel bolt covers and center caps as supplied*
 Ensure the yellow tire pressure tag is installed on the steering wheel
 Set and store tire pressures for either sold vehicle OR stock
inventory vehicle*
Driving Performance
 Check service interval and verify correct interval is displayed
 Apply Inventory Maintenance Sticker**
 Install showroom charger to ensure battery remains
charged at all times**
 Check horn operation
 Verify hold and release of electronic parking brake
Technician
I certify that all operations have been completed and this vehicle has been prepared in accordance with Audi Procedures and
Quality Standards, and has met the standards for Perfect Delivery.
Technician Signature
Effective 6-20-2017-US
Version 1.1
Last 8 of VIN
Completion Date
PRE-DELIVERY INSPECTION (PDI) | 2