MY 2018 A8L-S8 P
Service Bulletin Details
Public Details for: MY 2018 A8L-S8 P
New document
- 2018 -
Models from 2018
2018 AUDI A8 |
2018 AUDI S8PLUS |
2018 A8 L/S8 plus Audi Pre-Delivery Inspection Stock No. Dealer Number R.O. No. VIN Road test mileage out Road test mileage in Reminders All items must be completed prior to customer delivery by an Audi technician Audi recommends using an Audi approved battery charger to prevent excessive battery discharge during inspection ALL PDI function tests must be run in Guided Fault Finding (GFF) only. Do NOT use Guided Functions for any PDI related test as these will not be uploaded to the Paperless Server. Refer to the Special functions tab of ODIS Diagnosis for using GFF for PDI function tests It is advised to start ODIS with the engine running to enable all 5F Test Plans in GFF and also to ensure SVM sees all control units during the SVM check vehicle configuration For items marked with *, please refer to the PDI Technician Reference Document posted on ServiceNet for additional information For items marked with **, follow instructions for stock inventory vehicle Vehicle Preparation Exterior Check Elsa for open campaigns and updates Check all key buttons and features* Deactivate vehicle transport mode This step must be performed with the engine off, and ignition ON* Check all doors for proper power closing (if equipped)* Inspect exterior for damage, dings, dents and surface scratches Deactivate air suspension loading mode (if equipped)* Set adaption channel to enable CD Ripping (if equipped with NAV)* Set service reminder* Perform any open campaigns* Set the service intervals to 10k instead of 5k during PDI or existing 2017 vehicles that are set incorrectly 1. Click on the “Special functions” tab 2. Scroll down to ‘Maintenance’ 3. Select the 17 - inspection with oil change - 10,000 miles, USA function test Lighting and Windshield Test exterior lighting functions Test front washers (and headlight washers if equipped)* Install wiper blades Trunk Inspection Verify trunk is operational Verify operation of emergency release handle Install wheel bolt cover removal tool from PDI kit into trunk tool kit* 4. Perform the function test, but make sure you select “USA” as the country variant and when the question “Which service display should be reset?” comes up, select #2 (Oil service display and inspection service display). Verify tool kit is installed securely in luggage compartment 5. Then the MMI® indicator should now properly display the following values Interior Set spare tire pressure* Check battery clamps for proper torque* Verify operation of all seat belts and latches − Next oil service in 10,000 miles / 365 days Check operation of window, lock, and seat controls* − Next inspection service at 20,000 miles / 730 days Inspect mirrors for proper operation* Check rear view mirror operation* Effective 6-20-2017-US Version 1.0 PRE-DELIVERY INSPECTION (PDI) | 1 2018 A8 L/S8 plus Audi Pre-Delivery Inspection Interior (continued) On-Hoist Inspection Verify operation of all interior lights Remove transport suspension blocks (follow ELSA instructions) Check heated steering wheel operation (if equipped) Verify operation heated/ventilated and massaging seats (if equipped)* Verify operation of manual folding 2nd row Verify proper operation of climate control* Inspect operation of all power outlets* Check panoramic sunroof and sunshade operation* Verify operation of power rear and rear side sunshade operation (if equipped) Verify operation of front Passenger Occupant Detection System Check underside of vehicle for fluid leaks and loose components Check steering, boots, brake system, hoses, tires and wheels for damage Install wheel locks (if equipped) Install wheel bolt covers and center caps as supplied* Inspect wheel bolts for proper torque* Set and store tire pressures for either sold vehicle OR stock inventory vehicle* Driving Performance Settings Check horn operation Verify operation of MMI® touch pad (if equipped) Verify hold and release of electronic parking brake Set Time source setting to “GPS” and set Auto daylight savings time to “on”* Verify engine Start-Stop System functionality* Verify and set language and measurement units* Verify engine performance and acceleration* Verify Speech Dialog System is operating* Verify transmission operation, including shift paddles (if equipped) Set “Music volume while parking” to 6 lines* Test drive vehicle applying brakes several times* Set dealership location in navigation (if equipped)* Check adaptive air suspension in all positions (if equipped) Turn off Manual Speed Warning (if equipped)* Check steering/tire alignment Media / Radio / SAT Check for squeaks, rattles and wind noise Verify operation of AMI or aux. input (if equipped) Calibrate rear view mirror* Verify operation of CD/DVD player (if equipped) Verify quality of radio reception in AM/FM/SiriusXM® bands Insert SD card and test function of all slots Program the presets to local stations Driver Assistance Verify HD Radio is turned “off”* Verify all cruise control functions (if equipped) Verify operation of Rear Seat Entertainment (if equipped)* Verify cruise control/ACC with Stop & Go functionality (if equipped) Audi connect® (USA ONLY) (if equipped) Verify Audi side assist functionality Pre sense® rear (if equipped) Connect the dealer demo SIM card to verify system connects to mobile network* Verify Audi connect® Information Packet is present (if equipped)* Check 3G connection is possible Verify system connects to mobile network (if equipped). Review TSB 2042942 for additional information Turn on the wireless network (if equipped)* Turn on the Wi-Fi® hotspot (if equipped)* Verify Audi active lane assist functionality (if equipped) Verify operation of night vision camera (if equipped) Verify operation of parking system (if equipped)* Verify all vehicle Head-up display functionality (if equipped)* Verify operation of High-beam assist (if equipped) Activate NAV and follow directions back to dealership (if equipped) Check Wi-Fi® hotspot functionality (if equipped)* Enable Google EarthTM (if equipped)* Effective 6-20-2017-US Version 1.0 PRE-DELIVERY INSPECTION (PDI) | 2 2018 A8 L/S8 plus Audi Pre-Delivery Inspection Post-Road Test Inspection Interrogate fault memory and upload diagnostic log to GFF Paperless Server Perform a battery test* Check service interval and verify correct interval is displayed Check engine oil level* Check all fluid levels and top off if necessary Ensure the yellow tire pressure tag is installed on the steering wheel Apply Inventory Maintenance Sticker** Install showroom charger to ensure battery remains charged at all times** Technician I certify that all operations have been completed and this vehicle has been prepared in accordance with Audi Procedures and Quality Standards, and has met the standards for Perfect Delivery. Technician Signature Effective 6-20-2017-US Version 1.0 Last 8 of VIN Completion Date PRE-DELIVERY INSPECTION (PDI) | 3