MY 2018 A4-S4-al

Service Bulletin Details

Public Details for: MY 2018 A4-S4-al

Audi connect section: added: "if audi connect is not functioning with an error message, ?The myaudi server is currently unavailable?, reference tsb 2048436 to activate service"


- 2018 -

2018
A4/S4/A4 allroad
Audi Pre-Delivery Inspection
Stock No.
Dealer Number
R.O. No.
VIN
Road test mileage out
Road test mileage in
Reminders
 All items must be completed prior to customer delivery by an Audi technician
 Audi recommends using an Audi approved battery charger to prevent excessive battery discharge during inspection
 ALL PDI function tests must be run in Guided Fault Finding (GFF) only. Do NOT use Guided Functions for any PDI related test
as these will not be uploaded to the Paperless Server. Refer to the Special functions tab of ODIS Diagnosis for using GFF for PDI
function tests
 It is advised to start ODIS with the engine running to enable all 5F Test Plans in GFF and also to ensure SVM sees all control units
during the SVM check vehicle configuration
 For items marked with *, please refer to the PDI Technician Reference Document posted on ServiceNet for additional information
 For items marked with **, follow instructions for stock inventory vehicle
Vehicle Preparation
Trunk Inspection (continued)
 Check Elsa for open campaigns and updates
 Check battery clamps for proper torque*
 Deactivate vehicle transport mode*
This step must be performed with the engine off, and ignition on
Interior
 Set adaption channel to enable CD Ripping (if equipped with
NAV)*
 Check operation of window, lock, and seat controls*
 Set service reminder*
 Perform any open campaigns*
Exterior
 Inspect exterior for damage, dings, dents and surface
scratches
 Check all key buttons and features*
 Verify operation of all seat belts and latches
 Inspect mirrors for proper operation*
 Check rear view mirror operation*
 Verify operation of all interior lights
 Verify SOS button is green and Roadside assistance button
LED will remain off (if equipped)
 Verify operation of heated/ventilated seats (if equipped)
 Verify proper operation of climate control*
 Inspect operation of all power outlets*
Lighting and Windshield
 Test exterior lighting functions
 Test front washers (and headlight washers if equipped)*
Trunk Inspection
 Check panoramic sunroof and sunshade operation*
 Verify the glove compartment opens and closes properly
 Verify operation of front Passenger Occupant Detection
System
 Verify trunk is operational
Settings
 Verify operation of emergency release handle
 Set Time source setting to “GPS” and set Auto daylight savings time to “on”*
 Install wheel bolt cover removal tool from PDI kit into trunk
tool kit*
 Verify operation of MMI® touch pad (if equipped)
 Verify tool kit is installed securely in luggage compartment
 Set Time to “Automatic setting” and “Automatic time zone”
 Verify inflatable spare tire and compressor are present
 Verify and set language and measurement units*
 Set spare tire pressure*
 Verify Speech Dialog System is operating*
Effective 7-25-2017-US
Version 1.4
PRE-DELIVERY INSPECTION (PDI) | 1
2018
A4/S4/A4 allroad
Audi Pre-Delivery Inspection
Settings (continued)
Driving Performance
 Set “Entertain. Fad.” in Parking aid to an audible level*
 Check horn operation
 Set “Music volume while parking” to 6 lines*
 Verify hold and release of electronic parking brake
 Set dealership location in navigation (if equipped)*
 Verify engine Start-Stop System functionality*
 Turn off Manual Speed Warning (if equipped)*
 Verify engine performance and acceleration*
Media / Radio / SAT
 Verify transmission operation, including shift paddles (if
equipped)
 Verify operation of AMI or aux. input (if equipped)
 Test drive vehicle applying brakes several times*
 Verify operation of CD/DVD player (if equipped)
 Check steering/tire alignment
 Insert SD card and test function of all slots
 Check for squeaks, rattles and wind noise
 Verify HD Radio is turned “off”*
 Calibrate rear view mirror*
 Verify quality of radio reception in AM/FM/SiriusXM® bands
Audi connect® (USA ONLY) (if equipped)
 If Audi connect is not functioning with an error message,
“The myAudi Server is currently unavailable”, reference TSB
2048436 to activate service
Driver Assistance
 Verify cruise control/ACC functionality (if equipped)
 Verify Audi side assist functionality (if equipped)
 Verify Audi connect® Information Packet is present (if
equipped)*
 Verify operation of parking system (if equipped)*
 Check LTE connection is possible (if vehicle is marked retail
sold in DMS, data is only available after customer starts
6-month trial in www.myaudiconnect.com)
 Verify all vehicle Head-up display functionality (if equipped)*
 Activate NAV and follow directions back to dealership (if
equipped)
 Turn on the wireless network (if equipped)*
 Check Wi-Fi® hotspot visibility (if equipped)*
Post-Road Test Inspection
On-Hoist Inspection
 Interrogate fault memory and upload Diagnostic Log to GFF
Paperless Server
 Remove transport suspension blocks (follow ELSA instruction)
 Check Service Interval and verify correct interval is displayed*
 Check steering, boots, brake system, hoses, tires and wheels
for damage
 Check engine oil level*
 Check underside of vehicle for fluid leaks and loose components
 Perform a battery test*
 Check all fluid levels and top off if necessary
 Inspect wheel bolts for proper torque*
 Ensure the yellow tire pressure tag is installed on the steering wheel
 Install wheel locks (if equipped)
 Apply Inventory Maintenance Sticker**
 Install wheel bolt covers and center caps as supplied*
 Install showroom charger to ensure battery remains
charged at all times**
 Set and store tire pressures for either sold vehicle OR stock
inventory vehicle*
Technician
I certify that all operations have been completed and this vehicle has been prepared in accordance with Audi Procedures and
Quality Standards, and has met the standards for Perfect Delivery.
Technician Signature
Effective 7-25-2017-US
Version 1.4
Last 8 of VIN
Completion Date
PRE-DELIVERY INSPECTION (PDI) | 2


© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.