A011723 2048391-

Service Bulletin Details

Public Details for: A011723 2048391-

This bulletin contains a software update to correct a mil on withdtc P033300 and/or P032800.


- 2017 - 2016 - 2015 - 2014 - 2013 -

01 MIL on (DTC P033300 and/or P032800 Knock sensor high input stored in ECM)
01 17 23 2048391/1 July 13, 2017.
Model(s)
Year
VIN Range
Vehicle-Specific Equipment
A8
2013 - 2016
All
Not Applicable
S8
2013 - 2015
All
Not Applicable
S6, S7, RS
7, and RS
7+
2016 - 2017
All
Not Applicable
Condition
Customer statement:
 MIL on
Workshop findings:
The following DTC’s are logged in the engine control module (ECM), J623 (address word 0001):
 DTC P032800 (Knock Sensor 1 Circuit High Input)
 DTC P033300 (Knock Sensor 2 Circuit High Input)
Technical Background
OBD diagnostics are too sensitive. Replacing the knock sensor will not resolve the customer concern.
Production Solution
New software in the engine control module (ECM), J623 (address word 0001) addressed the condition.
Service
SVM Update Instructions
1. Follow all instructions in TSB 2011732: 00 Software Version Management (SVM), operating instructions.
2. Update the ECM, J623 (address word 0001) using the SVM action code as listed in the table below, if
necessary:
Page 1 of 4
© 2017 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of
America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted
in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the
publisher.
New Software
Old
New Software
Version
Software
Part Number
Version
(or higher)
Model
Engine
Old Software
Part Number
SVM Code
Input
S6/S7 MY13
CEUC
4G0906014
0011
4G0906014
0012
01A225
S6/S7 MY13
CEUC
4G0906014A
0007
4G0906014A
0008
01A225
S6/S7 MY13
CEUC
4G0906014B
0008
4G0906014B
0009
01A225
S6/S7 MY14
CEUC
4G0906014E
0008
4G0906014E
0006
01A225
S6/S7 MY15
CEUC
4G0906014E
0005
4G0906014E
0006
01A225
S6/S7 MY16
CTGE
4G0906014C
0005
4G0906014C
0006
01A225
S6/S7 MY16-17
CTGE
4G0906014D
0001
4G0906014D
0002
01A225
RS 7 MY14
CRDB
4G0906560A
0005
4G0906560A
0006
01A225
RS 7 MY14
CRDB
4G0906560
0011
4G0906560
0012
01A225
RS 7 MY14
CRDB
4G0906560B
0007
4G0906560B
0008
01A225
RS 7 MY15-16
CWUB
4G0906560D
0001
4G0906560G
0002
01A225
RS 7 MY15-16
CWUB
4G0906560F
0002
4G0906560F
0003
01A225
RS 7 MY17
CWUB
4G0906560G
0001
4G0906560G
0002
01A225
RS 7 MY16-17
Performance
CWUC
4G0906560G
0001
4G0906560G
0002
01A225
A8 4.0TFSI MY13-14
CEUA
4H0906014
0007
4H0906014
0008
01A225
A8 4.0TFSI MY13-14
CEUA
4H0906014A
0005
4H0906014A
0006
01A225
A8 4.0TFSI MY13-14
CEUA
4H0906014B
0004
4H0906014L
0005
01A225
A8 4.0TFSI MY13-14
CEUA
4H0906014C
0004
4H0906014C
0005
01A225
A8 4.0TFSI MY13-14
CEUA
4H0906014D
0004
4H0906014D
0005
01A225
A8 4.0TFSI MY13-14
CEUA
4H0906014H
0005
4H0906014H
0006
01A225
A8 4.0TFSI MY13-14
CEUA
4H0906014L
0004
4H0906014L
0005
01A225
A8 4.0TFSI MY15
CTGA
4H0906014G
0007
4H0906014G
0008
01A225
Page 2 of 4
© 2017 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of
America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted
in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the
publisher.
A8 4.0TFSI MY15
CTGA
4H0906014J
0005
4H0906014J
0006
01A225
A8 4.0TFSI MY15
CTGA
4H0906014K
0004
4H0906014K
0005
01A225
A8 Sport MY16
CTGF
4H0906014N
0001
4H0906014N
0002
01A225
S8 MY13
CGTA
4H0907557
0009
4H0907557
0010
01A225
S8 MY13
CGTA
4H0907557A
0005
4H0907557A
0006
01A225
S8 MY13
CGTA
4H0907557B
0004
4H0907557E
0004
01A225
S8 MY14
CTFA
4H0907557E
0003
4H0907557E
0004
01A225
S8 MY15-16
CTFA
4H0907557C
0005
4H0907557C
0006
01A225
S8 MY15-16
CTFA
4H0907557D
0005
4H0907557D
0006
01A225
S8 MY15-16
CTFA
4H0907557F
0002
4H0907557F
0003
01A225
S8 Plus MY16
DDTA
4H0907557G
0003
4H0907557G
0004
01A225
S8 Plus MY16
DDTA
4H0907557H
0001
4H0907557H
0002
01A225
3. After the SVM update, cycle the ignition.
Warranty
Claim Type:
 110 up to 48 Months/50,000 Miles.
 1E1 up to 8 Years/80,000 Miles.
 G10 for CPO Covered Vehicles – Verify Owner.
 If vehicle is outside any warranty, this Technical Service Bulletin is informational
only.
Service Number:
2470
Damage Code:
0039
Labor Operations:
Check software level in ECM (with no update
needed)
2470 0199
Max. 10 TU
Diagnostic Time:
GFF – Checking and clearing fault codes
included in existing labor operations
0150 0000
Time stated on
diagnostic
protocol (Max
50 TU)
Page 3 of 4
© 2017 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of
America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted
in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the
publisher.
Road test after service procedure
0121 0004
10 TU
Technical diagnosis at dealer’s discretion
(Refer to Section 2.2.1.2 and Audi Warranty Online for DADP allowance details)
Claim Comment:
As per TSB #2048391/1
All warranty claims submitted for payment must be in accordance with the Audi Warranty Policies and Procedures
Manual. Claims are subject to review or audit by Audi Warranty.
Required Parts and Tools
Approved battery charger.
Additional Information
The following Technical Service Bulletin will be necessary to complete this procedure:
 TSB 2011732 00 Software Version Management (SVM), operating instructions.
All part and service references provided in this TSB (2046232) are subject to change and/or removal. Always
check with your Parts Dept. and service manuals for the latest information.
©2017 Audi of America, Inc. All rights reserved. Information contained in this document is based on the latest
information available at the time of printing and is subject to the copyright and other intellectual property rights of
Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any
time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in
any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these
materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Page 4 of 4
© 2017 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of
America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted
in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the
publisher.


© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.