A011733 2045909-
Service Bulletin Details
Public Details for: A011733 2045909-
This bulletin provides a software update for misfiring cylinders.
Models from 2017
2017 AUDI RS7 |
2017 AUDI S8 |
Models from 2016
2016 AUDI RS7 |
2016 AUDI S8 |
01 MIL on (DTC P030500) stored in ECM 01 17 33 2045909/4 August 18, 2017. Supersedes Technical Service Bulletin Group 01 number 17-14 dated May 9, 2017 for reasons listed below. Model(s) Year RS 7, RS 7 performance, 2016 - 2017 and S8 + VIN Range Vehicle-Specific Equipment All Not Applicable Condition REVISION HISTORY Revision Date Purpose 4 - Revised header data (Corrected display) 3 05/09/2017 Revised header data (Corrected display) 2 01/19/2017 Revised header data (Added model) Revised title (Updated formatting) Customer statement: MIL on or flashing. Workshop findings: Only DTCs regarding misfiring on cylinder 5 (P030500) are logged in the engine control module (ECM), J623 (address word 0001). The following values are logged in the specific ambient conditions for DTC P030500: Engine speed between 5500 and 5900 rpm Standard load value over 70% Engine torque over 750 Nm Technical Background OBD diagnostics too sensitive at high engine load conditions. Page 1 of 3 © 2017 Audi of America, Inc. All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. Production Solution New software in the engine control module (ECM), (J623) (address word 0001) addressed the condition. Service SVM Update Instructions 1. Follow all instructions in TSB 2011732: 00 Software Version Management (SVM), operating instructions. 2. Update the engine control module (ECM), J623 (address word 0001) using the SVM action code as listed in the table below if necessary: Model Engine Code Old Software Part Number Old Software Version New Software Part Number New Software Version SVM Code Input (or higher) RS 7 CWUB 4G0906560G 0001 4G0906560G 0002 RS 7 performance CWUC 4G0906560G 0001 4G0906560G 0002 S8 plus DDTA 4H0907557H 0001 4H0907557H 0002 01A225 01A225 01A225 Warranty Claim Type: 110 up to 48 Months/50,000 Miles. 1E1 up to 8 Years/80,000 Miles. G10 for CPO Covered Vehicles – Verify Owner. If vehicle is outside any warranty, this Technical Service Bulletin is informational only. Service Number: 2470 Damage Code: 0039 Labor Operations: Update ECM software level 2470 2599 Max 50 TU Diagnostic Time: GFF – Checking and clearing fault codes included in existing labor operations No allowance 0 TU Road test prior to service procedure No allowance 0 TU Page 2 of 3 © 2017 Audi of America, Inc. All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. Road test after service procedure No allowance 0 TU Technical diagnosis at dealer’s discretion (Refer to Section 2.2.1.2 and Audi Warranty Online for DADP allowance details) Claim Comment: As per TSB #2045909/4 All warranty claims submitted for payment must be in accordance with the Audi Warranty Policies and Procedures Manual. Claims are subject to review or audit by Audi Warranty. Required Parts and Tools Approved battery charger. Additional Information The following Technical Service Bulletin(s) will be necessary to complete this procedure: TSB 2011732, 00 Software Version Management (SVM), operating instructions. All parts and service references provided in this TSB (2045909) are subject to change and/or removal. Always check with your Parts Department and service manuals for the latest information. ©2017 Audi of America, Inc. All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites without the prior expressed written permission of the publisher. Page 3 of 3 © 2017 Audi of America, Inc. All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.