V011702 2045384
Service Bulletin Details
Public Details for: V011702 2045384
Update content to remove pre-road test labor operation number within warranty table.
Models from 2017
2017 VOLKSWAGEN JETTA |
Models from 2016
2016 VOLKSWAGEN JETTA |
Technical Bulletin Model Year Eng. Code Trans. Code VIN Range From VIN Range To Jetta 2016-2017 1.4T All AJ_GM000001 AJ_HM272378 (CZTA) Condition 01 17 02 February 21, 2017 2045384 Supersedes Technical Bulletin V011623 dated November 14, 2016 to clarify road test time in warranty table. Update Programming, DTC P3081 Stored in ECM Fault Memory Tip: This software update also proactively includes updates for fault code(s) P0556, P0456 and P0300 - P0304 found in the ECM -J623 -. DTC Description P3081 Engine temperature too low Technical Background Current Engine Control Module (ECM) software for cooling system monitoring not sufficient. Production Solution Improved Engine Control Module software in production CW41/16 VIN 3VWB67AJ7HM272378. Page 1 of 5 plus attachment © 2017 Volkswagen Group of America, Inc. All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. Technical Bulletin Service Update Programming Procedure: Tip: To Update-Programming using SVM, review and follow instructions in Technical Bulletin Instance 2014603 “Software Version Management”. The SVM Process must be completed in its entirety so the database receives the update confirmation response. A warranty claim may not be reimbursed if there is no confirmation response to support the claim. Note: Prior to launching the ODIS service diagnostic applications and starting control module update process, confirm tester screen saver and power settings in accordance with Special Tools and Equipment - Service Information Circular # VVT-12-02. Failure to do so may result in the tester entering power save mode during data transfer, and subsequent control module failure. When using a VAS 6150/X or 6160/X tester in conjunction with a VAS 5054A wireless transmitter head for a flash procedure, please connect a USB cable between the transmitter head and the tester. Failure to do so may lead to errors during the flash procedure. VAS tools must only be used with their power adapters plugged in. Under no circumstances should they be used on battery power alone during the programming procedure. Critical Warning: : The Midtronics Battery Charger must be connected to the vehicle battery for the duration of the programming, to ensure the battery state of charge remains above 12.5 volts during the update process. If the battery drops below 12.5 volts, the programming could fail which may result in damage to the control module. Control modules damaged by inadequate voltage will not be covered under the warranty policy. The technician should verify the vehicle voltage prior to starting the update process, and should monitor the voltage for the duration of the update. WARNING: Radiator Fan(s) may cycle ON high speed during the Update Process! There is a risk that personal injury may result if contact is made with spinning fan blades. Keep hands and all objects away from Radiator Fan(s) during Update Process! Update the Engine Control Module using the SVM Unit code as listed in the table below: Page 2 of 5 plus attachment © 2017 Volkswagen Group of America, Inc. All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. Technical Bulletin Model Engine Old Software Part No. Old Software Version New Software Part No. New Software Version (or higher) SVM Unit Code Jetta 1.4T 04E906023AK 3532 04E906023AK 3670 3D63 04E906023AL 3669 04E906023AK 3670 04E906023AL 3669 04E906023AK 3670 04E906023AL 3669 (CZTA) Jetta 1.4T 2849 04E906023AL (CZTA) Jetta 1.4T 2850 04E906023AP (CZTA) Jetta 1.4T 1.4T 2953 2721 04E906023AQ (CZTA) Jetta 3531 2954 2722 04E906023N (CZTA) 2529 1599 0731 Jetta 1.4T 04E906023P (CZTA) 2528 1571 1093 0732 The procedure can be found in GFF under Functions/ Component Selection, Software Version Management, Adapting Software. Tip: The SVM Process must be completed in its entirety so the database receives the update confirmation response. A warranty claim may not be reimbursed if there is no confirmation response to support the claim or action is carried out that is not explicitly stated in the Technical Bulletin. Ensure attached ECM/TCM Tuning Form has been completed and signed by customer as required in SVM Technical Bulletin Instance 2014603. Page 3 of 5 plus attachment © 2017 Volkswagen Group of America, Inc. All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. Technical Bulletin Warranty To determine if this procedure is covered under Warranty, always refer to the Warranty Policies and Procedures Manual 1) Model(s) Year(s) Eng. Code(s) Trans. Code(s) VIN Range From VIN Range To Jetta 2016-2017 1.4L All AJ_GM000001 AJ_HM272378 (CZTA) SAGA Coding Claim Type: Use applicable Claim Type 1) Service Number: 2470 Damage Code 0039 Parts Manufacturer HST Damage Location (Depends on Service No.) -- Use applicable when indicated in Elsa (L/R) Jetta 3ME 2) Labor Operation 3) : Charge Battery 27068950 = 10 TU Labor Operation 3) : Update Programming Included in GFF Time expenditure below Causal: Select Labor Operation 01500000 Diagnostic Time 4) GFF Time expenditure 01500000 = 50 TU max YES Road Test 01210004 = 00 TU YES Technical Diagnosis 01320000 = 00 TU max. NO Claim Comment: Input “As per Technical Bulletin 2045384” in comment section of Warranty Claim. 1) Vehicle may be outside any Warranty in which case this Technical Bulletin is informational only 2) Code per warranty vendor code policy. 3) Labor Time Units (TUs) are subject to change with ELSA updates. 4) Documentation required per Warranty Policies and Procedures Manual. Page 4 of 5 plus attachment © 2017 Volkswagen Group of America, Inc. All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. Technical Bulletin Required Parts and Tools No Special Parts required. Tool Description Tool No: Midtronics Battery Tester/Charger InCharge 940 (INC-940) or GRX3000VAS VAS Diagnostic Tool VAS 6150/X & VAS 6160/X and ODIS Service with current online updates Additional Information All part and service references provided in this Technical Bulletin are subject to change and/or removal. Always check with your Parts Dept. and Repair Manuals for the latest information. Document Control Revision Table Instance Number Published Date Version Number Reason For Update 2045384/3 2/21/17 V011702 To clarify road test time in warranty table. 2045384/1 11/1/16 V011619 Original publication. Page 5 of 5 plus attachment © 2017 Volkswagen Group of America, Inc. All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.