MY 2018 TT-TTS-T

2018
TT Coupe & Roadster /TTS/TT RS
Audi Pre-Delivery Inspection
Stock No.
Dealer Number
R.O. No.
VIN
Road test mileage out
Road test mileage in
Reminders
 All items must be completed prior to customer delivery by an Audi technician
 Audi recommends using an Audi approved battery charger to prevent excessive battery discharge during inspection
 ALL PDI function tests must be run in Guided Fault Finding (GFF) only. Do NOT use Guided Functions for any PDI related test
as these will not be uploaded to the Paperless Server. Refer to the Special functions tab of ODIS Diagnosis for using GFF for PDI
function tests
 It is advised to start ODIS with the engine running to enable all 5F Test Plans in GFF and also to ensure SVM sees all control units
during the SVM check vehicle configuration
 For items marked with *, please refer to the PDI Technician Reference Document posted on ServiceNet for additional information
 For items marked with **, follow instructions for stock inventory vehicle
Vehicle Preparation
Interior
 Check Elsa for open campaigns and updates
 Verify operation of all seat belts and latches
 Deactivate vehicle transport mode*
This step must be performed with the engine off, and ignition on
 Check operation of window, lock, and seat controls*
 Set adaption channel to enable CD Ripping (if equipped with
NAV)*
 Inspect mirrors for proper operation*
 Check rear view mirror operation*
 Verify operation of all interior lights
 Set service reminder*
 Verify operation heated seats
 Perform any open campaigns*
 Verify proper operation of climate control*
 Inspect operation of all power outlets*
Exterior
 Inspect exterior for damage, dings, dents and surface
scratches
 Verify operation of front Passenger Occupant Detection
System
 Check all key buttons and features*
Settings
Lighting and Windshield
 Set Time source setting to “GPS” and set Auto daylight savings time to “on”*
 Test exterior lighting functions
 Verify operation of MMI touch pad (if equipped)
 Test windshield washers
 Set Time to “Automatic setting” and “Automatic time zone”
Trunk Inspection
 Verify trunk is operational
 Verify operation of emergency release handle
 Install wheel bolt cover removal tool from PDI kit into trunk
tool kit*
 Verify tool kit is installed securely in luggage compartment
 Verify and set language and Measurement Units*
 Verify Speech dialog system is operating*
 Set “Entertain. Fad.” in Parking aid to an audible level*
 Set “Music volume while parking” to 6 lines*
 Set dealership location in navigation (if equipped)*
 Turn off Manual Speed Warning (if equipped)*
 Set spare tire pressure*
 Check battery clamps for proper torque*
Effective 4-6-2017-US
Version 1.0
PRE-DELIVERY INSPECTION (PDI) | 1
2018
TT Coupe & Roadster /TTS/TT RS
Audi Pre-Delivery Inspection
Media / Radio / SAT
Driving Performance (continued)
 Verify operation of AMI or aux. input (if equipped)
 Check steering/tire alignment
 Verify operation of CD/DVD player
 Verify rear spoiler functionality
 Insert SD card and test function of all slots
 Check for squeaks, rattles and wind noise
 Verify HD Radio is turned “off”*
 Calibrate rear view mirror*
 Verify quality of radio reception in AM/FM/SiriusXM bands
Audi connect (USA ONLY) (if equipped)
Driver Assistance
 Verify Audi connect Information Packet is present (if
equipped)*
 Verify cruise control
 Check LTE connection is possible (if vehicle is marked retail
sold in DMS, data is only available after customer starts
6-month trial in www.myaudiconnect.com)
 Verify Audi side assist functionality (if equipped)
 Verify operation of parking system*
 Activate NAV and follow directions back to dealership (if
equipped)
 Turn on the Wi-Fi hotspot (if equipped)*
 Check Wi-Fi hotspot visibility (if equipped)*
 Enable Google Earth (if equipped)*
Convertible Functionality (if equipped)
 Test operation of power folding top*
On-Hoist Inspection
 Verify convertible top manual closing tools are present
 Remove transport suspension blocks (follow ELSA instruction)
Post-Road Test Inspection
 Check steering, boots, brake system, hoses, tires and wheels
for damage
 Interrogate fault memory and upload Diagnostic Log to GFF
Paperless Server
 Check underside of vehicle for fluid leaks and loose components
 Check Service Interval and verify correct interval is displayed
 Inspect wheel bolts for proper torque*
 Install wheel locks (if equipped)
 Install wheel bolt covers and center caps as supplied*
 Set and store tire pressures for either sold vehicle OR stock
inventory vehicle*
Driving Performance
 Check horn operation
 Check engine oil level*
 Check all fluid levels and top off if necessary
 Perform a battery test*
 Ensure the yellow tire pressure tag is installed on the steering wheel
 Apply Inventory Maintenance Sticker**
 Install showroom charger to ensure battery remains
charged at all times**
 Verify hold and release of electronic parking brake
 Verify engine performance and acceleration*
 Verify transmission operation, including shift paddles
 Test drive vehicle applying brakes several times*
Technician
I certify that all operations have been completed and this vehicle has been prepared in accordance with Audi Procedures and
Quality Standards, and has met the standards for Perfect Delivery.
Technician Signature
Effective 4-6-2017-US
Version 1.0
Last 8 of VIN
Completion Date
PRE-DELIVERY INSPECTION (PDI) | 2