Q5 7-16-15

2016
Q5/Q5 hybrid/SQ5/Q5 TDI
Audi Pre-Delivery Inspection
Stock No.
Dealer Number
R.O. No.
VIN
Road test mileage out
Road test mileage in
Reminders
 All items must be completed prior to customer delivery by an Audi technician
 Audi recommends using an Audi approved battery charger to prevent excessive battery discharge during inspection
 Refer to the Special functions tab of ODIS Diagnosis using GFF for the PDI function tests
 It is advised to start ODIS with the engine running to enable all 5F Test Plans in GFF and also to ensure SVM sees all control units
during the SVM check vehicle configuration
 For items marked with *, please refer to the PDI Technician Reference Document posted on ServiceNet for additional information
Vehicle Preparation
Trunk Inspection (continued)
 Check Elsa for open campaigns and updates
 Verify tool kit is installed securely in luggage compartment
 Deactivate vehicle transport mode*
 Verify inflatable spare tire and compressor are present
 Set adaption channel to enable CD Ripping (if equipped with
NAV)*
 Verify operation of luggage cover
 Set service reminder*
Interior
 Perform any open campaigns *
 Verify operation of all seat belts and latches
Under the Hood Inspection
 Check battery clamps for proper torque*
 Perform a battery test*
 Check engine oil level*
 Check all fluid levels and top off if necessary
 Check operation of window, lock, and seat controls*
 Inspect mirrors for proper operation*
 Check rear view mirror operation*
 Verify operation of all interior lights
 Verify operation heated seats (if equipped)
 Verify operation heated/ventilated seats (if equipped)*
Exterior
 Verify proper operation of climate control*
 Check all key buttons and features*
 Inspect operation of all power outlets*
 Prepare the base bars for customer delivery (install bars
only upon customer request)*
 Check panoramic sunroof operation*
Lighting and Windshield
 Verify operation of front Passenger Occupant Detection
System
 Test exterior lighting functions
Settings
 Install wiper blades
 Set Time source setting to “GPS” and set Auto daylight savings time to “on.”*
 Test front washers (and headlight washers if equipped)*
 Verify and set language and Measurement Units*
Trunk Inspection
 Verify Voice Activation is operating*
 Verify power tailgate is operational and set default opening
height*
 Set “Music volume while parking” to 6 lines*
 Install wheel bolt cover removal tool from PDI kit into trunk
tool kit*
 Load Onboard Video Tutorials*
Effective 7-16-2015-US
Version 1.0
 Set dealership location in navigation (if equipped)*
PRE-DELIVERY INSPECTION (PDI) | 1
2016
Q5/Q5 hybrid/SQ5/Q5 TDI
Audi Pre-Delivery Inspection
Media / Radio / SAT
Driving Performance (continued)
 Verify operation of AMI or aux. input (if equipped)
 Verify engine Start-Stop System functionality (if equipped)*
 Verify operation of CD/DVD player (if equipped)
 Verify engine performance and acceleration*
 Insert SD card and test function of all slots
 Verify transmission operation, including shift paddles (if
equipped)
 Program the presets to local stations
 Test drive vehicle applying brakes several times*
 Verify HD Radio is turned “off”*
 Check steering/tire alignment
Audi connect (USA ONLY) (if equipped)
 Check for squeaks, rattles and wind noise
 Verify Audi connect Information Packet is present*
 Verify quality of radio reception in AM/FM/SiriusXM bands
 Connect the dealer demo SIM card to verify system connects
to mobile network*
 Calibrate rear view mirror*
 Turn on the wireless network*
Driver Assistance
 Check Wi-Fi hotspot functionality*
 Verify cruise control/ACC functionality (if equipped)
 Enable Google Earth *
 Verify Audi side assist functionality (if equipped)
On-Hoist Inspection
 Activate NAV and follow directions back to dealership (if
equipped)
 Remove transport suspension blocks (follow ELSA instruction)
 Verify operation of parking system (if equipped)*
 Check steering, boots, brake system, hoses, tires and wheels
for damage
Hybrid Technology (Q5 Hybrid only)
 Check underside of vehicle for fluid leaks and loose components
 Verify charging while braking in recuperation range*
 Inspect wheel bolts for proper torque*
 Verify EV button is operating*
 Check MMI and instrument cluster for proper operation
mode indication *
 Install wheel bolt covers and center caps as supplied*
 Set and store tire pressures for either sold vehicle OR stock
inventory vehicle*
Post-Road Test Inspection
 Interrogate fault memory and print Diagnostic Log
Driving Performance
 Ensure the yellow tire pressure tag is installed on the steering wheel
 Check horn operation
 Apply Inventory Maintenance Sticker
 Verify hold and release of parking brake
 Install showroom charger to ensure battery remains
charged at all times
Technician
I certify that all operations have been completed and this vehicle has been prepared in accordance with Audi Procedures and
Quality Standards, and has met the standards for Perfect Delivery.
Technician Signature
Effective 7-16-2015-US
Version 1.0
Last 8 of VIN
Completion Date
PRE-DELIVERY INSPECTION (PDI) | 2