T-SB-0186-12_Rev

Service Bulletin Details

Public Details for: T-SB-0186-12_Rev

Tsb: revision notice february 21, 2018 rev2: ? Applicability has been updated to include 2015 ? 2017 model year tacoma vehicles. ? The parts information and repair procedure sections have been updated. September 10, 2014 rev1: ? Applicabili


- 2017 - 2016 - 2015 - 2014 - 2013 - 2012 - 2011 - 2010 - 2009 - 2008 - 2007 - 2006 - 2005 -

Models from 2017
2017 TOYOTA TACOMA
Models from 2016
2016 TOYOTA TACOMA
Models from 2015
2015 TOYOTA TACOMA
Models from 2014
2014 TOYOTA TACOMA
Models from 2013
2013 TOYOTA TACOMA
Models from 2012
2012 TOYOTA TACOMA
Models from 2011
2011 TOYOTA TACOMA
Models from 2010
2010 TOYOTA TACOMA
Models from 2009
2009 TOYOTA TACOMA
Models from 2008
2008 TOYOTA TACOMA
Models from 2007
2007 TOYOTA TACOMA
Models from 2006
2006 TOYOTA TACOMA
Models from 2005
2005 TOYOTA TACOMA
T-SB-0186-12
Rev2
October 3, 2012
Clutch Pedal Squeak/Creak Noise
Service
Category
Drivetrain
Section
Clutch
Market USA
Applicability
YEAR(S)
MODEL(S)
2005 - 2017
Tacoma
ADDITIONAL INFORMATION
REVISION NOTICE
February 21, 2018 Rev2:
 Applicability has been updated to include 2015 – 2017 model year Tacoma vehicles.
 The Parts Information and Repair Procedure sections have been updated.
September 10, 2014 Rev1:
 Applicability has been updated to include 2013 – 2014 model year Tacoma vehicles.
 The Warranty Information, Parts Information, and the Repair Procedure sections have
been updated.
Any previous printed versions of this bulletin should be discarded.
SUPERSESSION NOTICE
The information contained in this bulletin supersedes SB No. TC004-06.
 Applicability has been updated to include 2007 – 2012 model year Tacoma vehicles.
 The Repair Procedure section has been updated.
Service Bulletin No. TC004-06 is obsolete and any printed versions should be discarded.
Be sure to review the entire content of this bulletin before proceeding.
Introduction
Some 2005 – 2017 model year Tacoma vehicles may exhibit a squeak or creak noise from the
clutch pedal when it is depressed or released. Follow the Repair Procedure in this bulletin to
address this condition.
© 2018 Toyota Motor Sales, USA
Page 1 of 4
T-SB-0186-12
Rev2
October 3, 2012
Page 2 of 4
Clutch Pedal Squeak/Creak Noise
Warranty Information
OP CODE
DESCRIPTION
TC1400
R & R Clutch Pedal Sub-assembly,
Clutch Master Cylinder Assembly, and
Clutch Reservoir Hose
TIME
OFP
T1
T2
1.2
31311-04010
31311-04011
31311-04012
91
14
APPLICABLE WARRANTY
 This repair is covered under the Toyota Comprehensive Warranty. This warranty is in effect for
36 months or 36,000 miles, whichever occurs first, from the vehicle’s in-service date.
 Warranty application is limited to occurrence of the specified condition described in
this bulletin.
Parts Information
PART NUMBER
PART NAME
QTY
31420-60032
Clutch Master Cylinder Assembly
1
31311-04010
31311-04011
31311-04012
31311-04020
Clutch Pedal Sub-assembly
1
31434-04010
31434-60010
Clutch Reservoir Hose
1
PREVIOUS
NEW
31420-04010
31420-04011
31420-04020
31420-60031
© 2018 Toyota Motor Sales, USA
T-SB-0186-12
Rev2
October 3, 2012
Page 3 of 4
Clutch Pedal Squeak/Creak Noise
Required Tools & Equipment
SPECIAL SERVICE TOOLS (SST)
PART NUMBER
QTY
Union Nut Wrench 10 mm
09023-00101
1
NOTE
Additional SSTs may be ordered by calling 1-800-933-8335.
REQUIRED TOOLS & MATERIAL
PART NUMBER
QTY
Body Grease W
08887-02007
1
MP (Multi-Purpose) Grease
–
As Needed
Brake Fluid: SAE J1703 or FMVSS No. 116 DOT 3
–
As Needed
Repair Procedure
1. Confirm the condition.
Is there a squeak or creak noise from the clutch pedal assembly when it is depressed
or released?
 YES — Continue to step 2.

NO — This bulletin does NOT apply. Continue diagnosis using the applicable
Repair Manual.
NOTE
Make sure the noise is coming from the clutch pedal assembly and NOT from other components
related to the clutch system.
© 2018 Toyota Motor Sales, USA
T-SB-0186-12
Rev2
October 3, 2012
Page 4 of 4
Clutch Pedal Squeak/Creak Noise
Repair Procedure (continued)
2. Replace the clutch pedal, clutch master cylinder assembly, and the clutch master
cylinder hose.
NOTE
 Apply body grease W where the clutch master cylinder clevis and clutch pedal meet (see callout 1).
 Apply MP grease to the shaft collar and turnover spring contact surfaces as shown in the Repair
Manual (see callouts 2 – 5).
Refer to TIS, applicable model and model year Repair Manual:

2005 Tacoma:
Drivetrain – Clutch – “Clutch Pedal Sub-Assy: Replacement”

2006 / 2007 / 2008 / 2009 / 2010 / 2011 / 2012 / 2013 / 2014 / 2015 / 2016 / 2017 Tacoma:
Drivetrain – Clutch – “Clutch: Clutch Pedal: Removal”

2006 / 2007 / 2008 / 2009 / 2010 / 2011 / 2012 / 2013 / 2014 / 2015 / 2016 / 2017 Tacoma:
Drivetrain – Clutch – “Clutch: Clutch Pedal: Installation”
Figure 1.
1
3
2
5
4
1
Apply Body Grease W Where the Clutch Master
Cylinder and the Clutch Pedal Meet
4
Apply MP Grease to the Clutch Pedal Spring
Holder and the Clutch Pedal Support
2
Apply MP Grease to the Clutch Pedal
Shaft Collar
5
Apply MP Grease to the Clutch Pedal
Sub-assembly and the Compression Spring
3
Apply MP Grease to the Two Bushings
© 2018 Toyota Motor Sales, USA


© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.