K84412328

Service Bulletin Details

Public Details for: K84412328

Diagnostic trouble code ( dtc ) P249C intermittently lighting the malfunction indicator lamp ( mil ) - obd15 and us14+obd16 (non-common rail) chassis, changed repair instructions to reflect obd16 software release


- 2017 - 2016 -

Solution K84412328
Tuesday, March 6, 2018 7:35:59 PM CET
Solution
Title (customer effect)
Diagnostic Trouble Code ( DTC ) P249C Intermittently Lighting The Malfunction
Indicator Lamp ( MIL ) - OBD15 And US14+OBD16 (Non-Common Rail Fuel System)
Chassis
Cause
OBD15 And US14+OBD16 (Commonly Model Year 2016 and 2017) Chassis may log
DTC P249C under High RPM and Light load conditions
Solution
Overview
Vehicles may display the MIL and P249C - Excessive Time To Enter Closed Loop
Reductant Injection Control.
The code and warning lamp will likely set when the chassis is running at high RPMs
with a light load. Aside from the warning lamp there will be no effects on driveability or
performance.
Repair Information
Verify the chassis emissions level
• Details can be found in the Product Details box on the Product tab in PTT as seen
below:
For OBD15 And US14+OBD16 Chassis:
- Software improvements have been released to address this code. If P249C is
present and there are no other symptoms to indicate a physical issue, software
should be checked and updated as necessary.
- One or two modules can be affected by this update. Ensure the proper
instructions are followed:
- If the chassis has had containment software loaded previously:
• Reprogram the Engine Control Module ( EMS ) ONLY
- If the chassis has not had software containment
• Reprogram the following modules in the order listed.
1. Engine Control Module ( EMS )
2. Aftertreatment Control Module ( ACM )
- If the chassis returns for frequent recurrence of the code following the software
update, normal Guided Diagnostic procedures will need to be followed.
Solution visibility
Dealer distribution
Function(s)/component(s) affected
Function affected
Documentation , TT
, engine , 1 1 0 EMS , EECU , Diagnostic tool
Function Group
Function Group
2841 Electronic Control Unit , 381 combined instrument
Customer effect
Main customer effect
calibration/programming/pairing/missing operation , diagnostics/methodology , fault
code/display
Fault code(s)
OBD 2013 Diagnostic
Trouble Codes
POWERTRAIN , P249C
Conditions
Vehicle operating mode
when driving , when stationary
Administration
Author
A241298
Last modified by
RU4469V
Creation date
16-01-2017 18:01
Date of last update
07-02-2018 21:02
Review date
25-01-2018 00:01
Status
Published
NA_MACK_Vehicle_Range
NA_MACK_Vehicle_Ran
ge
Conventional , CHU , CXU , GU , TD
NA_VOLVO_Vehicle_Range
NA_VOLVO_Vehicle_Ra
nge
Conventional , VNX , VNL , VNM , VHD , VAH
Engine family
Engine family
Volvo , 11L Engine , 13L Engine , 16L Engine , Mack , MP7 , MP8 , MP10
Emission Standard
Emission Standard
US16 , US15


© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.