T-TT-0475-18

Service Bulletin Details

Public Details for: T-TT-0475-18

Tt: in the event that injector seal repair is required on vehicles equipped with a direct injection fuel system, a special service tool set is required to properly install the seal onto the injector. As new vehicle configurations have been


- 2018 - 2017 - 2016 -

Models from 2018
2018 TOYOTA CAMRY
Models from 2016
2016 TOYOTA TACOMA
Tech Tip T-TT-0475-18
January 11, 2018
Subject
Market
Special Service Tools: Injector Seal Tool Sets
Service Category
Section
Engine/Hybrid System
Fuel System
USA
Applicability
Models Equipped with Direct Injection
APPLICABLE VEHICLES
2017
2017
2017
2017
Highlander
Sienna
Highlander HV
iA
2018
2016-2017
2017
Camry
Tacoma
86
CONDITION
In the event that injector seal repair is required on vehicles equipped with a direct injection fuel
system, a Special Service Tool Set is required to properly install the seal onto the injector. As new
vehicle configurations have been released, several injector seal tool sets have been distributed to
accommodate these new vehicles. There are a total of three injector seal tool sets for Toyota models,
located in the appropriate SST cabinets. Each kit contains mutiple pieces as shown in the diagram
below. The individual pieces must remain together to ensure these tools are used correctly. Refer to
the repair manual for the tool information to ensure the correct tool is used for the desired application.
RECOMMENDATIONS
Reference the table below for an overview of each injector seal tool set.
Injector Seal Tools
Make
Kit Part
49 D013 1A0
Number
Part
49 D013 49 D013 49 D013
Number
102
104
103
Description Holder
Guide
Installer
Toyota
09260-39021
0926103011
Holder
0926103020
Guide
09260-39030
0926103011
Holder
0926103030
Guide
Diagram
Drawer
Location
Drawer 10
Drawer 1
Drawer 1
LINK REFERENCES
This Tech Tip does not contain any link references
Expires on
Ver. 2.8 01/01/2017 T
07/11/2018
© 2017, Toyota Motor Sales, USA
Page 1 of 1


© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.