S-SB-002-12 Rev2
Service Bulletin Details
Public Details for: S-SB-002-12 Rev2
The front wheel opening extension pad set (right and left front wheel opening extension pads, 4 screw clips) is loaded in the luggage compartment at the assembly plant to avoid damage in transit. Install the front wheel opening extension pa
Models from 2014
2014 SCION FR-S |
Models from 2013
2013 SCION FR-S |
September 21, 2012 S-SB-0020-12 Front Wheel Opening Extension Pad Installation During PDS Service Category General Section Pre-Delivery Service Market USA Applicability YEAR(S) MODEL(S) 2013 iQ EV ADDITIONAL INFORMATION Introduction The front wheel opening extension pad set (right and left front wheel opening extension pads, 4 screw clips) is loaded in the luggage compartment at the assembly plant to avoid damage in transit. Install the front wheel opening extension pads to the vehicle during Pre-Delivery Service (PDS). Warranty Information OP CODE DESCRIPTION TIME OFP T1 T2 N/A Not Applicable to Warranty – – – – Installation Procedure 1. Remove the 2 tapping screws from the engine under cover, and remove the 2 screw clips from the front bumper and the fender liner. Figure 1.. HINT • Do NOT dispose of the screws, they will be reused. • The clips can be disposed of, they will not be reused. © 2012 Toyota Motor Sales, USA Page 1 of 2 S-SB-0020-12 September 21, 2012 Front Wheel Opening Extension Pad Installation During PDS Installation Procedure (Continued) 2. Install the new screw clips to the front bumper cover and the fender liner. Figure 2.. HINT Be sure to install the extension pads using the new clips supplied. 3. Align the front wheel opening extension pad holes with the screw clips and secure it with 2 tapping screws. Figure 3.. HINT There is a distinguishable mark on each pad. 4. Repeat steps 1 – 3 to install the other front wheel opening extension pad. © 2012 Toyota Motor Sales, USA Page 2 of 2