A701765 2044417
Service Bulletin Details
Public Details for: A701765 2044417
This technical service bulletin provides instructions for insulating the headliner/sunroof area to prevent a noise.
Models from 2018
2018 AUDI ALLROAD |
2018 AUDI Q7 |
Models from 2017
2017 AUDI ALLROAD |
2017 AUDI Q7 |
70 Noises from headliner/sunroof area 70 17 65 2044417/7 November 1, 2017. Supersedes Technical Service Bulletin Group 70 number 17-64 dated September 20, 2017 for reasons listed below. Model(s) Year VIN Range Vehicle-Specific Equipment A4 allroad, Q7 2017 - 2018 All Not Applicable Condition REVISION HISTORY Revision Date Purpose 7 - Revised Service (Updated step 7 with a clearer image for tape location) 6 09/20/2017 Revised header (Added MY 2018 Q7 and MY 2017 – 2018 allroad) 5 05/30/2017 Revised Service (Updated required tape material) Revised Required Parts and Tools (Updated part number) The customer hears a rattle from the headliner area. Technical Background The noises can be caused by movement in the clips that attach the headliner to the sunroof frame or movement between components of the sunroof frame. Production Solution Felt material has been added to points of contact in production. Service 1. Test drive the vehicle (preferably with the customer) and duplicate the noise. Applying pressure to areas of the headliner around the perimeter of the sunroof will eliminate the noise, confirming the root cause. Page 1 of 6 © 2017 Audi of America, Inc. All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. 2. Remove the headliner. The clips shown in the illustration will need webbing adhesive tape (D 004350A2) (Figure 1). Figure 1. Location of the headliner to sunroof frame clips. 3. Remove the clips and apply the webbing adhesive tape underneath them, as shown (Figure 2). Figure 2. Location of the webbing adhesive tape application. Page 2 of 6 © 2017 Audi of America, Inc. All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. 4. Reinstall the clips (Figure 3). Figure 3. Clips reinstalled. 5. Apply webbing adhesive tape to the sunroof frame lip at each clipping point (Figure 4). Figure 4. Application area on sunroof frame area of clip engagement. Page 3 of 6 © 2017 Audi of America, Inc. All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. 6. There are two additional points of contact at the front sunroof frame plates that could be a source for noise (Figure 5). Figure 5. Areas of the sunroof frame to be isolated with webbing adhesive tape. 7. Apply webbing adhesive tape between the sections of the sunroof frame plates on both the right and left sides as shown in the illustration (Figure 6). Figure 6. Webbing adhesive tape applied between the side and front sunroof frame plates. 8. Perform a final test drive to confirm that the noise has been eliminated. Page 4 of 6 © 2017 Audi of America, Inc. All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. Warranty Claim Type: 110 up to 48 Months/50,000 Miles. If vehicle is outside any warranty, this Technical Service Bulletin is informational only. Service Number: 7084 Damage Code: 0020 Labor Operations: Headliner remove + reinstall - Allroad 7084 1910 360 TU Headliner remove + reinstall – Q7 7084 1900 330 TU Diagnostic Time: Apply fleece tape to headliner clips and sunroof 7084 9999 frame plates 30 TU GFF No allowance 0 TU Road test prior to service procedure 0121 0002 10 TU Road test after service procedure 0121 0004 10 TU Technical diagnosis at dealer’s discretion (Refer to Section 2.2.1.2 and Audi Warranty Online for DADP allowance details) Claim Comment: As per TSB #2044417/7 All warranty claims submitted for payment must be in accordance with the Audi Warranty Policies and Procedures Manual. Claims are subject to review or audit by Audi Warranty. Page 5 of 6 © 2017 Audi of America, Inc. All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. Required Parts and Tools Part Number Part Description Quantity D 004350A2 0.1 Webbing Adhesive Tape Additional Information All parts and service references provided in this TSB (2044417) are subject to change and/or removal. Always check with your Parts Department and service manuals for the latest information. ©2017 Audi of America, Inc. All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites without the prior expressed written permission of the publisher. Page 6 of 6 © 2017 Audi of America, Inc. All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.