PDI 2018 A6-S6 T
Service Bulletin Details
Public Details for: PDI 2018 A6-S6 T
Vehicle preparation section: added "using guided functions" to "set adaption channel to enable cd ripping (if equipped)"
- 2018 -
Models from 2018
2018 AUDI A6 |
2018 AUDI S6 |
2018 A6/S6 Audi Pre-Delivery Inspection Stock No. Dealer Number R.O. No. VIN Road test mileage out Road test mileage in Reminders All items must be completed prior to customer delivery by an Audi technician Audi recommends using an Audi approved battery charger to prevent excessive battery discharge during inspection ALL PDI function tests must be run in Guided Fault Finding (GFF) only. Do NOT use Guided Functions for any PDI related test as these will not be uploaded to the Paperless Server. Refer to the Special functions tab of ODIS Diagnosis for using GFF for PDI function tests It is advised to start ODIS with the engine running to enable all 5F Test Plans in GFF and also to ensure SVM sees all control units during the SVM check vehicle configuration For items marked with *, please refer to the PDI Technician Reference Document posted on ServiceNet for additional information For items marked with **, follow instructions for stock inventory vehicle Vehicle Preparation Exterior (continued) Check Elsa for open campaigns and updates Inspect exterior for damage, dings, dents and surface scratches Deactivate vehicle transport mode This step must be performed with the engine off, and ignition on* Lighting and Windshield Deactivate air suspension loading mode (if equipped)* Test exterior lighting functions Set adaption channel to enable CD Ripping using Guided Functions (if equipped with NAV)* Test front washers (and headlight washers if equipped)* Install wiper blades Set service reminder* Perform any open campaigns* Trunk Inspection Set the service intervals to 10k instead of 5k during PDI or existing 2017 vehicles that are set incorrectly Verify trunk is operational 1. Click on the “Special functions” tab 2. Scroll down to ‘Maintenance’ Verify operation of emergency release handle Install wheel bolt cover removal tool from PDI kit into trunk tool kit* 3. Select the 17 - inspection with oil change - 10,000 miles, USA function test Verify tool kit is installed securely in luggage compartment 4. Perform the function test, but make sure you select “USA” as the country variant and when the question “Which service display should be reset?” comes up, select #2 (Oil service display and inspection service display). Check battery clamps for proper torque* 5. Then the MMI® indicator should now properly display the following values Set spare tire pressure* Interior Verify operation of all seat belts and latches Check operation of window, lock, and seat controls* Inspect mirrors for proper operation* − Next oil service in 10,000 miles / 365 days Check rear view mirror operation* − Next inspection service at 20,000 miles / 730 days Verify operation of all interior lights Exterior Check all key buttons and features* Effective 11-1-2017-US Version 1.1 Check heated steering wheel operation (if equipped) Verify operation of heated/ventilated and massaging seats (if equipped)* PRE-DELIVERY INSPECTION (PDI) | 1 2018 A6/S6 Audi Pre-Delivery Inspection Interior (continued) Audi connect (USA ONLY) (if equipped) (continued) Verify operation of manual folding 2nd row Enable Google EarthTM (if equipped)* Verify proper operation of climate control* Inspect operation of all power outlets* On-Hoist Inspection Check panoramic sunroof and sunshade operation* Remove transport suspension blocks (follow ELSA instruction) Verify operation of front Passenger Occupant Detection System Verify operation of rear side manual sunshades (if equipped) Verify operation of power rear sunshade (if equipped) Settings Verify operation of MMI® touch pad (if equipped) Set Time source setting to “GPS” and set Auto daylight savings time to “on”* Verify and set language and measurement units* Check steering, boots, brake system, hoses, tires and wheels for damage Check underside of vehicle for fluid leaks and loose components Install wheel locks (if equipped) Install wheel bolt covers and center caps as supplied* Inspect wheel bolts for proper torque* Set and store tire pressures for either sold vehicle OR stock inventory vehicle* Verify Speech Dialog System is operating* Driving Performance Set “Music volume while parking” to 6 lines* Check horn operation Set dealership location in navigation (if equipped)* Verify hold and release of electronic parking brake Turn off Manual Speed Warning (if equipped)* Verify engine Start-Stop System functionality* Media / Radio / SAT Verify operation of all USB ports Verify operation of AMI or aux. input (if equipped) Verify operation of CD/DVD player (if equipped) Insert SD card and test function of all slots Program the presets to local stations Verify HD Radio is turned “off”* Verify engine performance and acceleration* Verify transmission operation, including shift paddles (if equipped) Test drive vehicle applying brakes several times* Check adaptive air suspension in all positions (if equipped) Verify rear spoiler functionality Check steering/tire alignment Check for squeaks, rattles and wind noise Audi connect® (USA ONLY) (if equipped) Calibrate rear view mirror* Connect the dealer demo SIM card to verify system connects to mobile network* Verify quality of radio reception in AM/FM/SiriusXM® bands Verify Audi connect® Information Packet is present (if equipped)* Check LTE connection is possible (if vehicle is marked retail sold in DMS, data is only available after customer starts 6-month trial in www.myaudiconnect.com) Verify system connects to mobile network (if equipped). Review TSB 2042942 for additional information* Driver Assistance Verify all cruise control functions (if equipped) Verify cruise control/ACC with Stop & Go functionality (if equipped) Verify Audi side assist functionality Pre sense® rear (if equipped) Verify Audi active lane assist functionality (if equipped) Turn on the wireless network (if equipped)* Verify operation of night vision camera (if equipped) Turn on the Wi-Fi® hotspot (if equipped)* Verify operation of parking system (if equipped)* Check Wi-Fi® hotspot visibility. No data available at PDI (if equipped)* Verify all vehicle Head-up display functionality (if equipped)* Check Wi-Fi® hotspot functionality (if equipped)* Effective 11-1-2017-US Version 1.1 Verify operation of High-beam assistant (if equipped) PRE-DELIVERY INSPECTION (PDI) | 2 2018 A6/S6 Audi Pre-Delivery Inspection Driver Assistance (continued) Activate NAV and follow directions back to dealership (if equipped) Post-Road Test Inspection Interrogate fault memory and upload diagnostic log to GFF Paperless Server Perform a battery test* Check service interval and verify correct interval is displayed Check engine oil level* Check all fluid levels and top off if necessary Ensure the yellow tire pressure tag is installed on the steering wheel Apply Inventory Maintenance Sticker** Install showroom charger to ensure battery remains charged at all times** Technician I certify that all operations have been completed and this vehicle has been prepared in accordance with Audi Procedures and Quality Standards, and has met the standards for Perfect Delivery. Technician Signature Effective 11-1-2017-US Version 1.1 Last 8 of VIN Completion Date PRE-DELIVERY INSPECTION (PDI) | 3