S-SB-0007-14
Service Bulletin Details
Public Details for: S-SB-0007-14
Pre-delivery service check sheet
- 2015 -
Models from 2015
2015 SCION TC |
tC 01 Install Short Pin (see page 2) ......................................... 02 Install radio antenna ........................................................ FUNCTIONAL OPERATION Apply parking brake and cycle ignition “IG-ON,” place gear selector in reverse; turn on lights and rear defogger. Unlock all doors, release fuel door, release trunk hatch. 01 02 03 04 05 06 07 08 09 Check dome, courtesy, map, and sun visor lights* .......... Check warning/indicator lights, gauges, and horn ........... Check windshield wipers and washers ............................ Check headlights, instrument lights, turn signals, dimmer switch, emergency flashers, and brake lights .................. Check inside/outside rear view mirror operation/ adjustment ....................................................................... Check power outlet* and cigarette lighter ....................... Check audio/navigation* systems, set SSP* to tC, and set clock .......................................................................... Install shift-lock override button cover ............................ Check sliding roof* ......................................................... WALKAROUND INSPECTION Start at driver’s front door, check window and door lock operation (from master power switch, if equipped). Continue around vehicle in a counterclockwise direction checking each door and window operation, child door locks, seat belts, interior condition, all lights, luggage compartment contents. Finish by checking headlight aim and continue into UNDER HOOD checks. 01 Check Smart Key System* ........................................... 02 Check door and door lock operation, including each wireless remote control/theft deterrent system* .............. 03 Check power window operation ...................................... 04 Check that engine starts with all keys ............................. 05 Check seats and seat belt operation ............................... 06 Check rear defogger........................................................ 07 Check side marker, tail, backup, and license plate lights 08 Check rear hatch/cargo area trim appearance ............... 09 Adjust compact spare tire pressure and check jack and tool installation ............................................................... 10 Check headlight aim ........................................................ UNDER HOOD 01 02 03 04 05 Check engine oil and ATM* fluid levels............................ Check brake and clutch* fluid levels ................................ Check engine coolant level .............................................. Check windshield washer fluid level ............................... Check battery state-of-charge using Digital Battery System Analyzer (SOC Reading: ___________%) ...... 06 Inspect for fuel, oil, coolant, and other fluid leaks ............ * Inspect or install when equipped/required. UNDER VEHICLE (ON HOIST) Adjust/ Repair April 2014 OK OK BEFORE INSPECTION Adjust/ Repair 2015 PRE-DELIVERY SERVICE CHECK SHEET 01 Remove disc brake anti-rust covers/anti-corrosion wheel film* ...................................................................... 02 Activate and Initialize Tire Pressure Warning System (TPWS) (see page 2) ...................................................... 03 Inspect tires for defects/damage ..................................... 04 Install wheel covers/caps/spare tire wheel covers* .......... 05 Install rubber body plugs ................................................ 06 Inspect for fuel, oil, coolant, and other fluid leaks ............ 07 Visually check bolts and nuts on chassis and powertrain for looseness ................................................................... 08 Inspect under the vehicle for damage, rust, etc. .............. ROAD TEST A complete road test helps assure customer satisfaction. Drive vehicle over a variety of road surfaces and driving conditions. Check for unusual noise and driving performance. Enter Odometer Reading Reading Before Test: _______________ Reading After Test: ________________ 01 02 03 04 05 06 07 08 09 10 11 Check cold engine operation ........................................... Check engine operation during warm-up ......................... Check engine at normal operating temperature............... Check clutch*/automatic transmission operation ............. Check brake and parking brake operation ....................... Check steering operation and off-center/vehicle pull/flutter ......................................................................... Inspect for abnormal noise and vibration ......................... Inspect for squeaks and rattles ........................................ Check heater and A/C operation ..................................... Check speedometer operation ........................................ Check cruise control operation ........................................ FINAL INSPECTION AND CLEANING 01 Remove interior protective covers, unnecessary labels, tags, etc. (Remove protective covers just before delivery to customer)..................................................................... 02 Verify floor mat application and install using retaining clips* ............................................................... 03 Visually inspect all interior parts for installation, damage, fit, dirt, etc. ........................................................ 04 Remove Rapgard™ film & clear protective bumper film* . 05 Wash and clean vehicle ................................................... 06 Inspect paint finish for scratches, chips, rust, dents, damage, etc. .................................................................... 07 Inspect exterior body parts for proper installation, damage, rust, etc. ............................................................ 08 Place Owner’s Guide and first aid kit portfolio* in glove box .................................................................... 09 Place oil change sticker on inside of windshield, top left corner ........................................................................ 10 Perform Techstream Health Check ................................ 11 Install front license plate and mounting bracket* (see page 2) ............................................................................ Completion and retention of this form is required to comply with Toyota’s Warranty Policy. TECHNICIAN’S SIGNATURE SERVICE MANAGER’S SIGNATURE NAME (PLEASE PRINT) NAME (PLEASE PRINT) Date Dealer Name Dealer Code We hereby certify that all items on this form have been checked and corrected for proper operation as required. Vehicle Identification Number (Sticker) .SHORT PIN INSTALLATION To minimize battery discharge the Short Pin has been removed and is stored in the engine compartment Relay Block. Install the Short Pin and confirm all related DTCs are cleared. DTC Clearing Procedure 1. Connect Techstream. 2. Cycle the ignition switch to the “IG-ON” position. 3. Using Techstream, check any other codes being output. 4. Erase DTCs (B1650 & B1794) and Freeze Frame Data. 1 2 NOTE If any DTCs besides B1650 & B1794 appear, repair the applicable system according to the Repair Manual. 1 Install Short Pin Here 2 Remove This Short Pin TPWS ACTIVATION & INITIALIZATION Activation Procedure 1. Connect Techstream. 2. Cycle the IG switch to the “IG-ON” position and check that the Low Tire Pressure Warning Light blinks for 1 minute and then remains illuminated. 3. Press or remove the valve core to reduce the tire inflation pressure rapidly by 6 psi (0.4 kfg/cm², 40 kPA), or more, within 30 seconds. 4. Check that the Low Tire Pressure Warning Light goes OFF after all the TPWS sensors are activated. NOTE To adjust the tire pressure correctly when the outside temperature is significantly colder than shop temperature, perform a Health Check using Techstream and select the “Compensation Tire Pressure” checkbox. Compensation pressures will be displayed on the Health Check results screen. Adjust the tire pressure when the tires are cold. 5. Using Techstream, check for DTCs (C2111-C2114). If no DTCs are stored, continue to the Initialization Procedure. If these DTCs are stored, repeat step 3. Initialization Procedure Refer to the Repair Manual for the Initialization procedure. Please note the spare tire does not have a TPWS sensor. FRONT LICENSE PLATE & MOUNTING BRACKET INSTALLATION* For states that require a front license plate, please install per this procedure. The bracket and self-tapping screws are stored in the luggage compartment. Installation Procedure 1. Align holes “A” of the mounting bracket with the dimples on the radiator lower grille. Mark the locations of holes “B” on the radiator lower grille. NOTE Holes “A” are used for the installation of the mounting bracket to the radiator lower grille. Holes “B” are used for the installation of the front license plate to the mounting bracket. B 1 B 2 4 2 2. Align holes “A” of the mounting bracket with the dimples on the radiator lower grille. Mark the locations of holes “B” on the radiator lower grille. NOTICE Do NOT drill into the dimples of the radiator lower grille. 3. Drill 2 relief holes with a diameter of 11 mm (0.43 in.) at holes “B” on the radiator lower grille. This will prevent the license plate retaining bolt ends from contacting the grille. 4. Install the mounting bracket to the radiator lower grille using the 2 self-tapping screws provided. 5. Install the front license plate to the mounting bracket using 2 non-corroding bolts with the following dimensions. Nominal Length: 15.0 mm (0.59 in.) Diameter: 6.0 mm (0.24 in.) 1 A A 1 Front License Plate 2 Bolts 1 3 1 Mounting Bracket 2 Mark and Drill Holes 3 Dimples 4 Screw