T-SB-0048-13
Service Bulletin Details
Public Details for: T-SB-0048-13
Some 2009 ? 2013 model year corolla and matrix vehicles may exhibit uneven brake pad wear on the rear disc brake pads. The vehicle may also exhibit a grinding or scraping noise due to the uneven brake pad wear. An updated rear disc brake pa
- 2013 - 2012 - 2011 - 2010 - 2009 -
Models from 2013
2013 TOYOTA COROLLA |
2013 TOYOTA MATRIX |
Models from 2012
2012 TOYOTA COROLLA |
2012 TOYOTA MATRIX |
Models from 2011
2011 TOYOTA COROLLA |
2011 TOYOTA MATRIX |
Models from 2010
2010 TOYOTA COROLLA |
2010 TOYOTA MATRIX |
Models from 2009
2009 TOYOTA COROLLA |
2009 TOYOTA MATRIX |
T-SB-0048-13 March 25, 2013 Uneven Rear Brake Pad Wear Service Category Brake Section Brake (rear) Market USA Applicability YEAR(S) MODEL(S) 2009 – 2013 Corolla 2009 – 2013 Matrix ADDITIONAL INFORMATION Introduction Some 2009 – 2013 model year Corolla and Matrix vehicles may exhibit uneven brake pad wear on the rear disc brake pads. The vehicle may also exhibit a grinding or scraping noise due to the uneven brake pad wear. An updated rear disc brake pad kit has been developed to address this condition. Production Change Information This bulletin applies to vehicles produced BEFORE the Production Change Effective VINs shown below. MODEL Corolla PLANT DRIVETRAIN Takaoka JTDBU4EE#DJ112296 TMMC 2T1BU4EE#DC028654 TMMMS Matrix PRODUCTION CHANGE EFFECTIVE VIN FWD 5YEBU4EE#DP143363 2T1KE4EE#DC051047 TMMC 2T1KU4EE#DC037631 Warranty Information OP CODE DESCRIPTION TIME 473061 R & R Pad Kit 0.6 Combo A Opposite Side 0.3 OFP T1 T2 04466-02210 87 19 APPLICABLE WARRANTY • This repair is covered under the Toyota Basic Warranty. This warranty is in effect for 36 months or 36,000 miles, whichever occurs first, from the vehicle’s in-service date. • Warranty application is limited to occurrence of the specified condition described in this bulletin. © 2013 Toyota Motor Sales, USA Page 1 of 3 March 25, 2013 T-SB-0048-13 Page 2 of 3 Uneven Rear Brake Pad Wear Parts Information PREVIOUS PART NUMBER CURRENT PART NUMBER PART NAME QTY 04466-02210 04466-02270 04466-02260 Pad Kit, Disc Brake, Rear 1 Required Tools & Equipment PART NUMBER QTY Variable Pin Wrench Set* 09960-10010 1 Rear Disc Brake Tool Set* 09719-14020 1 Companion Flange Holding Tool* 09330-00021 1 SPECIAL SERVICE TOOLS (SST) * Essential SST. NOTE Additional SSTs may be ordered by calling 1-800-933-8335. Repair Procedure 1. Remove the rear brake pads. Refer to the Technical Information System (TIS), applicable model and model year Repair Manual: • 2009 / 2010 / 2011 / 2012 / 2013 Corolla: Brake – Brake (Rear) – “Brake (Rear): Rear Brake (for Disc Type): Removal” • 2009 / 2010 / 2011 / 2012 / 2013 Matrix: Brake – Brake (Rear) – “Brake (Rear): Rear Brake (for Torsion Beam Type Suspension): Removal” 2. Inspect the rotor and pads. Refer to TIS, applicable model and model year Repair Manual: • 2009 / 2010 / 2011 / 2012 / 2013 Corolla: Brake – Brake (Rear) – “Brake (Rear): Rear Brake (for Disc Type): Inspection” • 2009 / 2010 / 2011 / 2012 / 2013 Matrix: Brake – Brake (Rear) – “Brake (Rear): Rear Brake (for Torsion Beam Type Suspension): Inspection” © 2013 Toyota Motor Sales, USA March 25, 2013 T-SB-0048-13 Uneven Rear Brake Pad Wear Repair Procedure (Continued) 3. Install the NEW brake pads. Refer to TIS, applicable model and model year Repair Manual: • 2009 / 2010 / 2011 / 2012 / 2013 Corolla: Brake – Brake (Rear) – “Brake (Rear): Rear Brake (for Disc Type): Installation” • 2009 / 2010 / 2011 / 2012 / 2013 Matrix: Brake – Brake (Rear) – “Brake (Rear): Rear Brake (for Torsion Beam Type Suspension): Installation” © 2013 Toyota Motor Sales, USA Page 3 of 3