LI41.10-P-065520

Service Bulletin Details

Public Details for: LI41.10-P-065520

Howling and whistling noises from area of center bearing of propeller shaft


- 2017 - 2016 -

Howling and whistling noises from area
of center bearing of propeller shaft
Topic number
LI41.10-P-065520
Version
1
Design group
41.10 Propeller shaft
Date
01-10-2017
Validity
Affects model series 253
Reason for change
Reason for block
Complaint:
Howling noises (see reference file in attachment) in the drive train in the area of the propeller shaft center bearing.
Complaint occurs under following operating parameters:
- At outside temperatures below +5 °C (41 °F)
- In a vehicle speed range of 30 km/h - 70 km/h (18-44 mph)
- When accelerating under a light load
- Complaint disappears after short distance (approx. 2-3 km, (1-2 miles)
Attachments
File
Description
Geräusch205.mp3
Reference file (howling noises from intermediate bearing
of propeller shaft).
VID-20161209-WA0000.mp4
Reference file (howling noise from intermediate bearing of
propeller shaft).
Cause:
Possible resonance in the intermediate bearing of propeller shaft (grooved ball bearing).
Remedy:
A test drive must be performed. For accurate analysis (localization) of the noise, use the "Steelman Chassis Ear" noise diagnosis kit (SI 58.40-P-0036A). Currently, if the intermediate bearing (grooved ball bearing) of the propeller shaft
was clearly identified as the cause (noise source), the propeller shafts may not be replaced.
Optimized parts will be available as from week 04/2017.
Note: Please do not replace any components as this will not remedy the complaint at this time.
Symptoms
01-10-2017 8:43 PM
© Copyright Daimler AG
PARKEGL
Page 1/2
Power transmission / Noises / Howling/whistling
Operation numbers/damage codes
Op. no.
Operation text
41-2020
REMOVE/INSTALL PROPELLER
SHAFT (2-PIECE), ESTABLISH FINDINGS
41012 36
41-6135
REPLACE PROPELLER SHAFT (2-PIECE) (REMOVED)
41012 36
01-10-2017 8:43 PM
© Copyright Daimler AG
Time
PARKEGL
Damage
code
Note
Page 2/2


© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.