PIC3843E

Service Bulletin Details

Public Details for: PIC3843E

This preliminary information communicates to the dealer to disconnectthe ipc from bcm before programming will force the bcm to prompt the technician to enter the mileage during programming.


- 2010 - 2009 - 2008 - 2007 - 2006 - 2005 - 2004 - 2003 -

Models from 2003
2003 SATURN ION
Bulletin No.: PIC3843E
Published date: 04/24/2018
Preliminary Information
PIC3843E Incorrect Odometer Reading after BCM Replacement
Models
Brand:
Model:
VIN:
Model Years:
from
Engine:
to
Transmissions:
Chevrolet
Cobalt
2005 - 2010
All
All
All
All
Chevrolet
Malibu
2004 - 2008
All
All
All
All
Pontiac
G5
2007 - 2010
All
All
All
All
Pontiac
Pursuit
2005 - 2006
All
All
All
All
Saturn
Ion
2003 - 2007
All
All
All
All
Supersession Statement
This PI was superseded to update model years. Please discard PIC3843D.
The following diagnosis might be helpful if the vehicle exhibits the symptom(s) described in this PI.
Condition / Concern
A technician may comment that the odometer reading is incorrect after replacing BCM and performing a reprogramming event.
Recommendations / Instructions
After replacing a BCM, disconnect the IPC prior to programming the new BCM.
If the IPC is not disconnected it may validate the current mileage (incorrect in this case) with the ECM and self-populate the BCM with
the incorrect mileage.
Disconnecting the IPC from BCM before programming will force the BCM to prompt the technician to enter the mileage during
programming. If the incorrect mileage was transferred to the IPC, try programming again with the IPC disconnected.
IMPORTANT: If this procedure still does not allow the correct the Odometer reading to be input then the BCM will need to be replaced
again.
Please follow this diagnostic or repair process thoroughly and complete each step. If the condition exhibited is resolved
without completing every step, the remaining steps do not need to be performed.
© 2016 General Motors. All Rights Reserved.


© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.