A011855 2045673_
Service Bulletin Details
Public Details for: A011855 2045673_
This bulletin provides instructions regarding an svm update needed when a dtc is stored in the engine control module.
Models from 2018
2018 AUDI A4 |
2018 AUDI A4 ALLROAD |
2018 AUDI A5 |
2018 AUDI Q7 |
Models from 2017
2017 AUDI A4 |
2017 AUDI A4 ALLROAD |
2017 AUDI A5 |
2017 AUDI A6 |
2017 AUDI A7 |
2017 AUDI A8 |
2017 AUDI Q7 |
Models from 2016
2016 AUDI A6 |
2016 AUDI A7 |
2016 AUDI A8 |
01 MIL on, DTC P060C00 stored in ECM 01 18 55 2045673/3 March 1, 2018. Supersedes Technical Service Bulletin Group 01 number 17-24 dated July 14, 2017 for reasons listed below. Model(s) Year VIN Range Vehicle-Specific Equipment A4, A5, and Q7 2017 - 2018 All 3.0 TFSI A6, A7, and A8 2016 – 2017 All 3.0 TFSI Condition REVISION HISTORY Revision Date Purpose 3 - Revised header data (Added MY 2017 and 2018 A4, A5, A5 Cab, and Q7) Revised Service (Updated table with new models) 2 07/14/2017 Revised Service (Added A8 and Q7 models) 1 10/21/2016 Initial publication Customer states: MIL on Workshop findings: The following DTC is stored in the engine control module (ECM), J623 (address word 0001): DTC P060C00 (Internal Control Module Main Processor Performance) Technical Background Not applicable. Production Solution Optimized software with improved diagnostics. Page 1 of 3 © 2018 Audi of America, Inc. All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. Service For 2.0 L and 3.0 L engines, do not replace the ECM for this fault. For 2.0 L engine, erase DTC and the improved software is scheduled for CW 22/18. For 3.0 L engine, do not contact Technical Assistance Center (TAC) unless the problem persists after the software update or if there is a problem with the SVM process below. 1. Follow all instructions in TSB 2011732: 00 Software Version Management (SVM), operating instructions. 2. Update the engine control module using the SVM action code as listed in the table below if necessary: Model Engine and/or Transmission C7 A6/A7 CREC D4 A8 CREC Q7 CREC Old Software Part Number Old Software Version New Software Part Number New Software Version 4G2907551A ≤ 0004 4G2907551C 0003 4G2907551C ≤ 0001 4H2907551A ≤ 0008 4H2907551A 0008 4H2907551B ≤ 0007 4H2907551B 0007 4H2907551D ≤ 0009 4H2907551D 0009 4H2907551E ≤ 0007 4H2907551E 0007 4M0907551 ≤ 0006 4M0907551 0006 4M0907551A ≤ 0005 4M0907551A 0005 SVM Action Code (or higher) 01A226 01A226 01A226 Warranty Claim Type: 110 up to 48 Months/50,000 Miles. 1E1 up to 8 Years/80,000 Miles. G10 for CPO Covered Vehicles – Verify Owner. If vehicle is outside any warranty, this Technical Service Bulletin is informational only. Service Number: 2470 Damage Code: 0039 Labor Operations: Connect battery charger and perform software update with SVM 2470 2599 50 TU Page 2 of 3 © 2018 Audi of America, Inc. All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. Diagnostic Time: Claim Comment: GFF 0150 0000 20 TU Road test prior to service procedure No allowance 0 TU Road test after service procedure No allowance 0 TU As per TSB #2045673/3 All warranty claims submitted for payment must be in accordance with the Audi Warranty Policies and Procedures Manual. Claims are subject to review or audit by Audi Warranty. Additional Information All parts and service references provided in this TSB (2045673) are subject to change and/or removal. Always check with your Parts Department and service manuals for the latest information. Please check the Repair Manual for fasteners, bolts, nuts, and screws that require replacement during the repair. ©2018 Audi of America, Inc. All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites without the prior expressed written permission of the publisher. Page 3 of 3 © 2018 Audi of America, Inc. All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.