15-211-17R

ATTENTION:
CLAIMS PERSONNEL q
IMPORTANT - All
Service Personnel
Should Read and
Initial in the boxes
provided, right.
SERVICE MANAGER
© 2017 Subaru of America, Inc. All rights reserved.
GENERAL MANAGER q
PARTS MANAGER
q
q
SERVICE BULLETIN
APPLICABILITY: 2017-18MY Impreza						
NUMBER: 15-211-17R
2018MY Crosstrek 						 DATE: 06/13/17
2018MY Legacy and Outback
REVISED: 12/19/17
SUBJECT:
Reprogramming File Availability for Additional
Optimization of Harman Gen 3 Audio and Navigation
Head Units
INTRODUCTION:
The following information addresses reprogramming file availability and a software update
installation procedure to provide optimization to the new Harman Gen 3 Audio and Navigation head
units utilized in the models as listed above. The procedure will involve either downloading the
software update files from Subarunet (or using those sent directly from Nuspire) and transferring
them onto a flash drive for head unit installation. It is VERY IMPORTANT to read and understand
this information completely before proceeding.
PRODUCTION CHANGE INFORMATION:
This bulletin will be updated with the production change information as soon as it is available.
These reprogramming files apply to the following audio / navigation units:
Multimedia System Type
6.5 Inch Display Audio System (Base)
8.0 Inch Display Audio System (Mid)
8.0 Inch Audio / Navigation System (High)
Descriptive Features
No CD slot / Eject Button
Phone Button
Map Button but no Phone Button
Continued...
CAUTION: VEHICLE SERVICING PERFORMED BY UNTRAINED PERSONS COULD
RESULT IN SERIOUS INJURY TO THOSE PERSONS OR TO OTHERS.
Subaru Service Bulletins are intended for use by professional technicians ONLY. They
are written to inform those technicians of conditions that may occur in some vehicles,
or to provide information that could assist in the proper servicing of the vehicle. Properly
trained technicians have the equipment, tools, safety instructions, and know-how to
do the job correctly and safely. If a condition is described, DO NOT assume that this
Service Bulletin applies to your vehicle, or that your vehicle will have that condition.
Bulletin Number: 15-211-17R; Revised 12/19/17
SUBARU OF AMERICA, INC. IS
ISO 14001 COMPLIANT
ISO 14001 is the international standard for
excellence in Environmental Management
Systems. Please recycle or dispose of
automotive products in a manner that is friendly
to our environment and in accordance with all
local, state and federal laws and regulations.
Page 1 of 15
2018MY Legacy and Outback Harman Audio / Navigation system Faceplate images
BASE
NO CD Player
MID
PHONE Button
HIGH
MAP Button
Continued...
Bulletin Number: 15-211-17R; Revised 12/19/17
Page 2 of 15
Materials Required:
6- 16GB (MINIMUM) USB 2.0 or 3.0 flash drives which are readily available at most office
supply retailers will be needed to perform these updates.
Recommended Flash Drives:
•
Kingston®: Data Traveler G3, G4, SE9 or the Hyper-X Series
•
SanDisk®: Cruzer Series, Ultra Flair
•
Transcend®: JetFlash 300, 600 or 790
•
Verbatim®: Store ‘n’ Go
NOTES:
• The USB flash drives can be USB 2.0 or 3.0.
•
The USB flash drive MUST be reformatted to NTFS before loading any files to it. NTFS is
not the standard format on most USB flash drives.
•
The update files are not overly large but, during the reprogramming procedure, the head unit
backs up some files to the USB drive. For this reason, sufficient USB drive memory size is
required, especially for the High / Navigation units.
•
The flash drives should be dedicated to storing these reprogramming files only. Do NOT
use any flash drives which contains or requires the use of file management, encryption, file
backup or other software to function properly.
•
Re-format (see Step 2) any prior USBs you may have used for WTN -74R as that version of
software must no longer be installed. This update includes all WTN -74R updates.
Continued...
Bulletin Number: 15-211-17R; Revised 12/19/17
Page 3 of 15
IMPORTANT: This new update INCLUDES all the previously released WTN-74R enhancements.
Therefore, if WTN-74R is still open, these new updates will satisfy the campaign. See Warranty /
Claim Information section at the end of this bulletin for further instructions.
Additional Symptoms and Enhancements to be addressed by these new reprogramming files:
1- No streaming audio. When using the Pandora® app, there is no audio output.
2- “Media is loading” is displayed on the screen but, the media never completes loading.
3- The screen freezes when the STARLINK screen is displayed.
Continued...
Bulletin Number: 15-211-17R; Revised 12/19/17
Page 4 of 15
NOTE: The following conditions were addressed in the previous software version update
(and WTN-74R) but, this one update incorporates all prior updates.
1- Radio station presets disappear (touch screen buttons return to “Initializing”).
2- STARLINK “Telematics Service in Progress” screen freezes.
3- Apple Car Play / Android Auto function does not operate (“No Device Connected”).
4- The complete guidance route can be displayed.
5- A Longitude and Latitude search feature has been added.
6- A “Beep” notification feature has been added for driving time and rest periods.
Continued...
Bulletin Number: 15-211-17R; Revised 12/19/17
Page 5 of 15
For reference, the previously released WTN-74R symptoms are also provided below. The main
purpose of WTN-74R was to address display screen freeze-up during Back-Up Camera display (when
the shifter is in “R”). In addition, the screen may also freeze when either the Subaru STARLINK or
Disclaimer Caution / I Agree screen is displayed.
			
The previously released WTN-74R updates also addressed these additional operational conditions:
1) After switching the vehicle (ACC or IGN) on, the display screen goes black with no audio output
and the hard key buttons are illuminated (on solid, or flashing / blinking).
Continued...
Bulletin Number: 15-211-17R; Revised 12/19/17
Page 6 of 15
2) Time of day displayed in the MFD (Multi-Function Display) is incorrect and the arrival time
displayed in Navigation units is also incorrect.
3) The time in the MFD automatically reverts to a “default” setting, even after setting the time using
“Manual” mode.
4) Audio volume goes to maximum automatically after one click of the volume up button on the
steering wheel. In some cases, this condition may also occur without input from the operator.
Maximum volume is also displayed on the screen.
Continued...
Bulletin Number: 15-211-17R; Revised 12/19/17
Page 7 of 15
SERVICE PROCEDURE / INFORMATION:
Affected Vehicles / Audio Units:
Vehicle Model
2017-18MY Impreza &
2018MY Crosstrek
Audio Unit Type (High, Mid, Base)
Audio Unit
Part Number
NAVIGATION (HIGH)
86271FL60A
8-Inch Display Audio (MID)
6.5-Inch Display Audio (BASE)
NAVIGATION (HIGH)
2018MY Legacy /
Outback
8-Inch Display Audio (MID)
6.5-Inch Display Audio (BASE)
86201FL62A
86201FL63A
86201FL60A
86201FL61A
86471AL65A
86471AL66A
86431AL65A
86431AL66A
86431AL61A
STEP 1- Verify the currently installed Software Version ID using the following steps:
•
After starting the engine, from the HOME screen, touch “Settings”.
•
From the Settings > General screen, scroll down to and then touch “System Information”.
Continued...
Bulletin Number: 15-211-17R; Revised 12/19/17
Page 8 of 15
•
Confirm the current Software Version ID. If the Current Version is Rel2.17.43.20 (Impreza
/ Crosstrek) or Rel2.17.43.30 (Legacy / Outback), STOP as this latest update has already
been installed.
STEP 2- Prepare the USB:
CAUTION: Do not use any USB flash drive which utilizes file organizing software or an
operating system.
•
Make sure the USB flash drive contains no other files.
•
Right click on the corresponding “Removable Disk”.
•
Select “Format”.
•
From the File System drop-down menu, select “NTFS”
•
Check the “Quick Format” box (if not already done).
•
Click on “Start” to format the USB flash drive.
STEP 3The files are available for download on Subarunet (see “A” below).
The applicable reprogramming files have also been sent directly to retailers by Nuspire in the same
way a Select Monitor Update would be pushed out. (see “B” below).
Follow “A” when using files downloaded from Subarunet.
Follow “B” when using the files sent directly to the SDS notebook from Nuspire.
Continued...
Bulletin Number: 15-211-17R; Revised 12/19/17
Page 9 of 15
“A” When using update files downloaded from Subarunet:
Click Here to Access the Downloads for Audio/Navigation Information on Subarunet
IMPORTANT: Files downloaded from Subarunet will be .zip files and must be unzipped before
they can be used.
Using the normal audio / navigation system file update download procedure: Go to Subarunet, select
Service Operations and Technical>>Forms/Downloads>>Downloads for Audio/Navi then click on
the applicable Hyperlink to download the file(s) to your SDS Notebook or PC:
“BASE - 2017-18MY Impreza-Crosstrek Harman Audio Update 11-2017”
“MID - 2017-18MY Impreza-Crosstrek Harman Audio Update 11-2017”
“HIGH - 2017-18MY Impreza-Crosstrek Harman Audio Update 11-2017”
“BASE - 2018MY Legacy-Outback Harman Audio Update 11-2017”
“MID - 2018MY Legacy-Outback Harman Audio Update 11-2017”
“HIGH - 2018MY Legacy-Outback Harman Audio Update 11-2017”
•
Go to Downloads.
•
CAUTION: After download is complete, NEVER change the file or folder names.
•
Once the files have been downloaded from Subarunet, click on the Downloads folder and then
sort by Date Modified to bring the most recent files to the top of the list.
•
Open / display the contents of File folder, for example (BASE-2017-18 Impreza- Crosstrek
Harman Audio Update 11-2017).
•
Click on “Extract All Files”.
•
From the dialog box, browse to My Documents then click on “Extract”.
•
Double-click on the required file (for this example, select the file entitled “BASE- 2017-MY
Impreza-Crosstrek Harman Audio Update 11-2017”).
•
Copy ONLY the “update” folder then paste (or click / drag) it to the “clean” USB flash drive
as listed (Removable Disk) in the directory.
•
To avoid confusion, label the flash drive with the file contents (e.g. BASE, MID or HIGH).
•
Go to Step 4.
“B” When using update files sent directly from Nuspire:
•
Go to My Documents on the GUI screen to display the list of available update files shown
below.
•
CAUTION: After download is complete, NEVER change the file or folder names.
Continued...
Bulletin Number: 15-211-17R; Revised 12/19/17
Page 10 of 15
•
Sort by Date Modified to bring the most recent files to the top of the list. The folder is named:
_Harman Audio-Navi Update Files. It contains the six folders shown here.
•
Double-click on the required file (for this example, select the file entitled “BASE- 201718MY Impreza-Crosstrek Harman Audio Update 11-2017”) and the update file will display as
shown.
•
Select the update folder and either copy / paste or click / drag it to the USB flash drive.
NOTE: Do not copy the entire “BASE- 2017MY…” File folder. Copy ONLY the File folder
named “update” to the flash drive
•
Once the folder named “update” is loaded onto the USB flash drive, right click on the drive
and select “Eject”.
•
Remove the USB flash drive after the prompt appears that says “Safe to Remove Hardware”.
•
Mark the USB to indicate the head unit it will update (BASE in this example).
•
Repeat the above steps to create the MID and HIGH USB flash drives as needed using a
separate USB drive for each update folder.
Continued...
Bulletin Number: 15-211-17R; Revised 12/19/17
Page 11 of 15
STEP 4- IMPORTANT: Confirm the update folder on the USB flash drive is for the head unit being
reprogrammed ONLY. Do not install multiple update folders onto the same flash drive at the same
time.
• After confirmation, move to the car and either start the engine or follow the procedure as
outlined in document GR8-1100 on STIS for use of the GR8’s Power Supply Mode.
Copy ONLY the folder named “update” to the USB.
•
Never change the folder name from “update”.
•
Confirm there is only a folder named “update” on the flash drive.
CAUTION: Confirm one final time the head unit you are about to update matches the USB flash
drive you have selected. Attempting to install the incorrect update file will disable the head unit.
STEP 5- Update Installation:
IMPORTANT: Always record the customer’s radio station presets and navigation favorites (where
applicable) before proceeding further as they will most likely need to be reset once the update and
re-boot procedures are completed. In addition, some customizable system settings may need to be
reset as they may return to the default setting during the update.
•
With the engine idling (or GR8 connected), plug the flash drive into the USB Port.
IMPORTANT NOTE: If the head unit does not recognize the USB flash drive during the
reprogramming process, this may be due to an incompatible Controller IC in the USB flash drive
or it is otherwise incompatible with the head unit. If this occurs, delete all files from the flash drive
and re-format it to “FAT32”, instead of “NTFS” and reload the appropriate “update” folder to the
USB flash drive. If the USB flash drive is still not recognized, please discontinue the use of that
drive and instead use a USB flash drive from a different manufacturer.
Continued...
Bulletin Number: 15-211-17R; Revised 12/19/17
Page 12 of 15
•
After the unit “authenticates” the USB flash drive, press “Next” and after the second screen is
displayed, press “Next” again.
•
The current and available software version information will be displayed. The Available
Version I.D should be Rel2.17.43.20 or Rel2.17.43.30.
NOTE: The displayed Available Version does not show the 2 after Rel. This is normal.
Rel2.17.43.20 (or.30 )
•
After confirming the Available Version, press “Install Now” to start the reprogramming
process. The screen will go blank (black) for a brief period after installation begins.
•
Each of the updates (Base, Mid and High) should take less than 10 minutes to install.
IMPORTANT NOTES:
•
Do not leave the vehicle once the update begins as ignoring pop-up requests may lead to
battery discharge.
•
Do not touch any of the buttons on the head unit while the updating process is taking place.
•
If during the updating an error screen is displayed asking “Do you want to Retry”, press
“Retry” to restart the update.
•
Once the updating process is complete, the head unit will perform a “soft” reboot.
(NOTE: several “hard” reboots are required to fully install the update. This procedure is
covered in Step 6 below.)
•
button to
CRITICAL STEP: After the reboot process completes, press the HOME
return to the HOME screen. (NOTE: If the “install message” is displayed asking if you
want to start the update process again, press “Cancel”, press the HOME button again and
return to the HOME screen.)
STEP 6- Turn the ignition OFF, open and close the driver’s door then remove the flash drive from
the USB port. If an error screen is displayed asking “Do you want to Retry”, press “Cancel”.
IMPORTANT: Wait AT LEAST 3 MINUTES before proceeding to Step 7.
Continued...
Bulletin Number: 15-211-17R; Revised 12/19/17
Page 13 of 15
STEP 7- Verify the newly-installed Software Version ID using the following steps:
•
Turn the ignition back ON. Confirm the “SUBARU STARLINK” screen is displayed. If
“SUBARU STARLINK” screen is NOT displayed on the first screen, system did not fully
enter “sleep mode” and reboot properly. Perform Step 6 again and wait AT LEAST 3
MINUTES before proceeding.
•
In some cases, the radio presets may not appear initially.
•
From the HOME screen, touch “Settings”.
•
From the Settings > General screen, scroll down to and then touch “System Information”.
		
•
Confirm Software Version is now “Rel2.17.43.20 (or .30)”.
Rel2.17.43.20.20 (or .30)
•
Press
(Home) to return to the Home screen and shut the engine OFF. Open and close the
driver’s door.
STEP 8- CRITICAL: Operation Check and Full Re-Boot Procedure:
1) Turn the ignition back ON (ACC) and confirm normal system operation.
2) Confirm the Home screen is displayed.
3) Turn the ignition OFF, open and close the driver’s door then WAIT AT LEAST 3
MINUTES to confirm the unit “times out” or “goes to sleep”.
4) Perform 1), 2) and 3) above again (a total of 5 cycles if completing WTN-74R OR only 2
cycles (1 additional cycle to Steps 1 & 2) if WTN was previously completed). If normal
to return to the Home screen and shut the ignition OFF to
operation is confirmed, press
complete the procedure.
Continued...
Bulletin Number: 15-211-17R; Revised 12/19/17
Page 14 of 15
IMPORTANT: If during this procedure, the screen goes blank (black) and the STARLINK
screen does not appear, the head unit must be replaced. THIS SHOULD BE A VERY RARE
OCCURRENCE. Contact SOA Techline should this condition occur.
STEP 9- If lost during the update process, reset the customer’s radio station presets, navigation
favorites (where applicable) and if necessary, reset the clock to complete the procedure.
WARRANTY / CLAIM INFORMATION:
For vehicles within the Basic New Car Limited Warranty period or covered by an active Subaru
Added Security Gold plan, this repair may be submitted using the following claim information:
Labor Description
Labor Operation #
Labor
Time
HARMAN AUDIO/NAVI VERSION ID & OPERATION CHECKS ONLY **
A031-150
0.4
HARMAN AUDIO / NAVI UNIT REPROGRAMMING
(INCLUDES VERSION ID CHECK AND OPERATIONAL CHECKS).**
A031-158
0.6
WTN-74R OPEN: HARMAN AUDIO / NAVI UNIT,
VERSION ID & OPERATION CHECKS ONLY
B103-110
0.4
WTN-74R OPEN: HARMAN AUDIO / NAVI UNIT REPROGRAMMING
(INCLUDES OPERATION CHECKS)
C103-118
0.2
Fail Code
Claim Type
ZRO-48
WC
WTN-74
RC
**NOTES: Use Operation Number A031-150 or A031-158 for all TSB 15-211-17R -applicable Crosstrek, Legacy, Outback and
2018MY Impreza models along with any 2017MY Impreza models which have already had the WTN74 campaign completed.
Any remaining 2017MY Impreza models having an OPEN WTN-74 campaign must use the campaign coding ONLY.
IMPORTANT: CRITICAL Claim Processing Update: When completing this TSB procedure OR a WTN-74R campaign, the
post-update software version number MUST be entered in the Miscellaneous Detail field when submitting the claim.
NOTE: A ONE-TIME charge of $50.00 can be claimed in sublet to cover the cost of the USB flash
drives.
IMPORTANT REMINDERS:
•
SOA strongly discourages the printing and/or local storage of service information as previously
released information and electronic publications may be updated at any time.
•
Always check for any open recalls or campaigns anytime a vehicle is in for servicing.
•
Always refer to STIS for the latest service information before performing any repairs.
Bulletin Number: 15-211-17R; Revised 12/19/17
Page 15 of 15